I have built a few race motors and this is beyond me. Not a torque wrench in sight, no torque sequencing, bouncing the cam all over the block, and my butt puckered the whole time just waiting for a gust of wind to come through and coat everything in sandy dust 😆. Granted tolerances are much higher for race engines but still. Gotta give it to them tho. I've seen them fix shit in a few hours that would take me a week lol 😆
Totally - has to be just a risk acceptance. Done on a gravel road for 80% cheaper than net new and 4 months wait.....I would change that oil every 2,000KMS for the first few months! :)
I got full recon isuzu 6hh1 exchange motor, includes rebuilt pump,new sensors etc. here in Australia, only 1 year warranty. Cost $24000 aud. Had to put my accessories on it.
The most well done assembling I’ve ever watched of these shops there. Nice clean shop and mechanics look like they are proud of their work. Clean clothing versus some of the other shops. Although I don’t think I ever saw them using a torque wrench? Most every bolt on this engine has torque specs. It was designed that way.
I’m impressed, outdoors, no lifting equipment, and no measurements. Just obvious experience. I would like to own the small rag -reused 1 liter soft drink container market tho. That guy is making out in this part of the world. Thanks for the video.
Great video, but at the end was it misfiring?. Could be the speed of the audio, unless one of the injectors needed bleeding, but to me it wasn’t firing on all 6 cylinders
Atleast the Con rod bolts and main bearing bolts should have been torque tightened including the cylinder head and camshaft bolts.Nice overhauling though
I love your videos guys you know what I like about it especially because he you're doing it in a place that that people think you guys don't have much intelligence and we know that you're more intelligent than they think you are it's wonderful to see people doing a wonderful work it's really really cool
acho os caras muito bons e sei também que eles não meio ninjas nesses trabalhos, mas não vi eles em momento algum usar um torquimetro pra dar os devidos apertos certos nesse motor, será que montaram assim ou foi cortado isso do video., mas de qualquer forma meus parabéns
The way these guys started off with air impact wrenches instead of the usual L-handle socket wrench, I thought they were pretty uptown and we would finally get to see a torque wrench in use. But not to be.
You want a torque wrench for those rod bolts and head bolts? Naw, just give em a few extra ugga duggas with the impact gun. Hey, where's the injectors? They're bangin around in that bucket with my box end wrenches.
Yeah, this torquing by hand don't always work. Great job but All the dust blowing around outside while putting in the interior components, yikes. We always did that inside a garage.
We saw: no Plasti-guage of the main bearings, no micrometer on the main bearings, no valve grinding, no valve stem reboring, no valve adjustments, lots of hammering on things that should never be hammered, no torque wrenches, no torquing in correct pattern, lots of stuff thrown on the dirt, etc, etc, etc.. And too many workers. With lots of unskilled workers some are going to not know what to do, or forget or mess up. There is no method or manuals or accountability. The result is very likely going to be not much good-- with plenty of leaks, rattles, poor compression, dirt in the engine, and heavy oil consumption. This is not how Japan became a quality provider.
نخیر. پاکستان همین الان دارد به اکرایین مهمات صادر میکند و حجم صادراتشان هم سنگین هست و انگستان پول تمامشان را نقد به پاکستان میدهد . بهتر است اخبار دنیا را بیشتر پیگیری کنید. سلامت باشید از ایران
ماشاء الله تبارك الرحمن تسلم ايديكم عمل فني جميل تحياتي لكم جميعا من فلسطين غزه
I have built a few race motors and this is beyond me. Not a torque wrench in sight, no torque sequencing, bouncing the cam all over the block, and my butt puckered the whole time just waiting for a gust of wind to come through and coat everything in sandy dust 😆. Granted tolerances are much higher for race engines but still. Gotta give it to them tho. I've seen them fix shit in a few hours that would take me a week lol 😆
What's a torque wrench lol. He has an air gun. 😆
Totally - has to be just a risk acceptance. Done on a gravel road for 80% cheaper than net new and 4 months wait.....I would change that oil every 2,000KMS for the first few months! :)
이나라사정에 맞게 정비하는거니 방법이 없다
My brain. My brain. I'm screaming through the phone! WHERE IS THE TORQUE WRENCH!
@@미처버린비둘기 이나라 다른 정비소는 토크렌치 사용함
나라얘기는 핑계일뿐😊
Highly skilled mechanics for their level of education and learning opportunities.
Always appreciate their hard work. 💓
How do you know what their level of education is?
Гшл
Когда все знают что надо делать! Молодцы!
Ребята Вы супер! Вся работа выполнена чисто. Настоящие профессионалы своего дела.
Они даже клапана не притерли, какие к черту профи!
Не, ну у них хотя бы стол имеется! Динамометрических ключей не завезли, но за стол - лайк не глядя!
поворотный стенд- поддон бля 🤣
Another great video.
Takes my mind off all the bad things going on in the world.
Thanks.
Botei fé, acho bonito quando o motor pega de primeira !!
I got full recon isuzu 6hh1 exchange motor, includes rebuilt pump,new sensors etc. here in Australia, only 1 year warranty. Cost $24000 aud. Had to put my accessories on it.
The most well done assembling I’ve ever watched of these shops there. Nice clean shop and mechanics look like they are proud of their work. Clean clothing versus some of the other shops. Although I don’t think I ever saw them using a torque wrench? Most every bolt on this engine has torque specs. It was designed that way.
Right 👍
Thanks for watching and comments ❤️❤️❤️
Are we watching the same video? They are working outside in the dirt.
They Used One Of Those Special Air Powered Torque Wrenches .
It's a great invention, you do it best, it's great for letting you know ❤️❤️❤️💪💪💪
Thanks ♥️♥️
sou escrito em seu canal moro no brazil e gosto muito dos seus videos muito bom
Это один из вариантов передачи опыта от мастера ученикам, у нас это делает ПТУ
More excellent work! Always nice to see a group of people who know what they're doing at work!
Thanks ❤️❤️
This is real mechanics at work! Pakistan and Mexico are the best mechanics in the world
😍❤️❤️
La persona que dirige el montaje de ese motor se le ve muy seguro y muy profesional. Felicidades.
خیلی عالی .حسن از ایران
I’m impressed, outdoors, no lifting equipment, and no measurements. Just obvious experience. I would like to own the small rag -reused 1 liter soft drink container market tho. That guy is making out in this part of the world. Thanks for the video.
😍❤️
Có cái bộ vô cecmeng quá oke đó bạn
Great video, but at the end was it misfiring?. Could be the speed of the audio, unless one of the injectors needed bleeding, but to me it wasn’t firing on all 6 cylinders
Thanks for watching and comments 😍
I'm from india your team and work very clean and very good 👍 but no use torruc wrench way
Deixa o motor mais tempo ligado até regulagem final. É um remédio pra quem gosta.
Very good job ❤👏👏👏👏MashaAllah
😍daora mano👍🏻👍🏻👍🏻
Does that come with an unlimited mileage, one day warranty?
Its amazing talent of doing like this, thanks boss
Não se pode usar chave de impacto pra aperta mancais e bielas.
Esses apertos tem q ser manual, e com uso de uma ferramenta específica.
Atleast the Con rod bolts and main bearing bolts should have been torque tightened including the cylinder head and camshaft bolts.Nice overhauling though
❤️
Good mechanic and his team 👏
።።።why you don't tight the bolt with torque wrench?
Các ban làm việc rất khoa học và kĩ thuật cao
São todos muito inteligentes sem sombra de dúvidas serviço garantido
I love your videos guys you know what I like about it especially because he you're doing it in a place that that people think you guys don't have much intelligence and we know that you're more intelligent than they think you are it's wonderful to see people doing a wonderful work it's really really cool
Thank you so much my friend ❤️❤️❤️❤️
Do you know how to convert a scania DS9 engine from an electric pump to a mechanical pump and what are the necessary spare parts?🤔😳please
curious what this costs over there?
Great job as usual. Thanks for the video
Fantastic skills. So impressive.
Thank you! Cheers! ❤️❤️
Sehr gut und weiter so danke.
I feel like you could drop these guys and an engine on a deserted island, with no tools, and they’d still make it work
acho os caras muito bons e sei também que eles não meio ninjas nesses trabalhos, mas não vi eles em momento algum usar um torquimetro pra dar os devidos apertos certos nesse motor, será que montaram assim ou foi cortado isso do video., mas de qualquer forma meus parabéns
9
P
von euch würde ich mir jederzeit den motor reparieren lassen top arbeit
Thank you so much ❤️❤️
The way these guys started off with air impact wrenches instead of the usual L-handle socket wrench, I thought they were pretty uptown and we would finally get to see a torque wrench in use. But not to be.
🚩👍👍👍Молодцы класс👍
You want a torque wrench for those rod bolts and head bolts?
Naw, just give em a few extra ugga duggas with the impact gun.
Hey, where's the injectors?
They're bangin around in that bucket with my box end wrenches.
may FAW 8 tan. 6 may 1 thuong hieu rat noi tieng cua trung quoc
Lets torque this up, this bolt one ugga dugga, this bolt two ugga duggas.
Porque no calibran los tornillos
MM77 Approved 👍🏼👍🏼
European mechanics be like: best we can do is a brand new engine, 20.000 dollar please
* euro
Excelente trabajo yo no conozco ese motor pero tiene tres semejantes en uno Cummins cat y Mitsubishi canter
gracias por ver y comentar. Su motor de camión chino FAW
Very good teacher that man
Good job you guys 👍👍👍you’re incredibly !!!!!!!!!
❤️❤️
Tôi cũng đã lắp rất nhiều các loại động cơ như vậy.
How come when rebuilding things you never see them use a Torque \\\\\\\wrench
Have often wondered that myself..
They do so many engines they do it by feel, don't like that big ass air wrench for tightening though!
AWESOME WORK...
more & more power tools… could workbenches be next??👀
момент затяжки??? не, не слышал)))
Good work
Great job you guys !!!!! Awesome 😎
Ладно хоть клапаны отрегулировали и поставили новые прокладки. Про динамометрический ключ уже все сказали, не буду повторять
greate video for chilling
like new from manufacture at the first try didn't fail.
Bearing Kaisa lagaya
Very good 👍
They didn't do the spill cut off🙃
Very good but they need torque wrench.
Yeah, this torquing by hand don't always work. Great job but All the dust blowing around outside while putting in the interior components, yikes. We always did that inside a garage.
They should be scrap the chinese junk truck and buy a new one with Japanese made.
very good ,but no torque wrench in sight
We saw: no Plasti-guage of the main bearings, no micrometer on the main bearings, no valve grinding, no valve stem reboring, no valve adjustments, lots of hammering on things that should never be hammered, no torque wrenches, no torquing in correct pattern, lots of stuff thrown on the dirt, etc, etc, etc..
And too many workers. With lots of unskilled workers some are going to not know what to do, or forget or mess up. There is no method or manuals or accountability. The result is very likely going to be not much good-- with plenty of leaks, rattles, poor compression, dirt in the engine, and heavy oil consumption. This is not how Japan became a quality provider.
😆😆😆😆😆😆😆😆
they have a outside work bench, OMG.
اعطيه نسبه نجاح 30٪100
Good bhut kam is tip to iadia me nahi hota
I guess there using an air torque wrench 🤔
good job. ..
What is this engine 🤔😳
السلام عليكم ما إسم المحرك و يستعمل لأس شاحنة ؟
golden dragon
Good job 🙏👍
This is how to make machine repair time short, and also short in durability 😁😁😁
Oie, gostei do seu canal ja me inscrevi!
Kerja yg bagus x
SHOW 👏👏👏👏👏
Динамометрический ключ, что это? Самый умный дед на видео, он же самый главный почитатель пневмопистолета)))
Masha Allah
Это будущие наши партнёры с Россией.
نخیر. پاکستان همین الان دارد به اکرایین مهمات صادر میکند و حجم صادراتشان هم سنگین هست و انگستان پول تمامشان را نقد به پاکستان میدهد . بهتر است اخبار دنیا را بیشتر پیگیری کنید. سلامت باشید از ایران
Buy the mechanic 50 steak kebobs and you will get a rebuilt motor in Afghanistan.
FAW + First Auto Works of China. So an assembly of Chinese made engine.
ماشاء الله
❤️❤️❤️
Wow beautiful works
I'm pleased none of you work on Aeroplane Engines 😂
If they get a chance in jet industry I believe they will do it as they done the truck job...
Kang banyk tmenya
Niceee
Bhai apki pas mujhi lagnatha kampar
6-7 man around the engine like bees
примерно так я ад и представлял
What a collar waste of time here.
No torque wrench was used for important torquing settings. This will not end well for someone who purchases it.
После того как на 4 минуте 'мастер' начал тянуть коленвал не от центра к краям а через задницу,да без проворота,я бросил смотреть.
🎉🎉🎉🎉
トルクレンチ無い世界か。
耐久性低いだろうな。でまた適当な修理で治すと。
Oi Boa noite costei
I would only give it a 1 day warranty 🤣
Because u r Blind mind
मैं भी इंजन का काम सीखता हूं चाचा जी