Wow that's awesome, so great. This is inspiring, we are inspired to remake your creation for educational/research purposes. ❤ Can you give us the list of all the materials that you use? Please, thank you. We are looking forward for your response, we will credit you in the appendix section of our paper. 😊
В начале видео нет никакой батарейки. Потом она для чего-то появилась. Прилепил её с внутренней стороны, что непрактично, т.к. её можно случайно задеть другим ботинком.
The more piezoelectric material, as well as a sufficient brace or chassis running from the toes and sole to the shins, thighs and waist would generate a lot more electricity, especially if running.
I really like the idea the only flaw I see that would make this less usable is maybe the longevity of the piezoelectric pads? I’m unsure of how long they’d run for. Also waterproof but that’s not a hard fix. Great!!!
How much time/steps/distance will it take to charge a 5000mah battery. Or how much mah/volt energy is produced after 100 steps for both legs. Please answer ASAP, its serious.
@@zafaralimengal2609 At 8:50 he shows that he starts with 3.51V. At 9:29 (which the creator claims he walked for two hours), the Voltage increased to 3.90V. Just calculate difference and you get the total. Simple.
Wow great it's an best project ever, I have some queries while trying this project can you please give contact info please, can you please help me do please
Can you help meh to answer my questions 1. How to make it fast to charge power bank in least steps (it can be done by increasing number of disks from 6 -> 12 ) or improveing bridge rectifier/ or both?????? It is actually a part of my FYP. I need to charge that shoes in least steps as possible Also suggest Me micro components if you can for Disks/rectifier/charger Please sir,
Sir can you please explain the whole process....I'm actually a student and I'm making a science project based on electricity generation and I loved your idea but I'm unable to understand
by just reading and making sense of it. i can help you on that. you just use the piezoelectric modules. that will give power to a power bank. that already has a charging system on it. its actually easy
Basically, those piezoelectric discs can generate vibrations when activated by electricity, and vice-versa, they generate electricity wfom bending. Like you can use them to create a simple buzzer (generating vibrations), or use it as an accoustic guitar pickup(it converts vibrations into electric charges). After these piezoelectric discs the diode bridges are located. They are there to direct the flow of energy, for the discs not to start using the battery instead.
Good Idea! But If... IF you were designing Those FOR ME!! YOU WOULD BE AFRAID! I weigh 235 pounds and I am not fat. I am overweight by like 35 pounds I do roofing and construciton though. but can only work part time now cuz I have falso hips and a bad left wrist
why did you connect it to a battery before connecting it to the power bank charging module? can we just connect it to the power bank or would that make it less efficient?
------------------------------
for more 👇
ruclips.net/user/skillmake
------------------------------
You should sell it on Etsy.
please list the components
You got a good idea all you got to do is figure a way to make it water proof and fit it inside the shoe to make it look better
Imagine going through airport security with this shoes😂😂
Why?
@@zizi-lw9pp Metal detecting
Wow that's awesome, so great. This is inspiring, we are inspired to remake your creation for educational/research purposes. ❤ Can you give us the list of all the materials that you use? Please, thank you. We are looking forward for your response, we will credit you in the appendix section of our paper. 😊
i likded you bcause you did not have any likes you can like you self
Amazing video we are making this project but can you please tell use which material you used for base board?
I used cardboard.
Please give Specifications of each component
Why you are using separate diodes for connecting 3 pizoelectric can we aonnect it all.
Only idiots can believe this. The piezo gives negligible current, apart from the losses of 1.4 V in the Greek.
Yeah. I believe MIT built a system that was able to coax out something like 90mw.
Less than 1.5wh for an entire day of walking lol
В начале видео нет никакой батарейки. Потом она для чего-то появилась.
Прилепил её с внутренней стороны, что непрактично, т.к. её можно случайно задеть другим ботинком.
what is the item used as base for cutting the sole shape please reply as soon as possible and it will be helpful for my science project.....🥰🥰😇😇
If you knew tell me please
The more piezoelectric material, as well as a sufficient brace or chassis running from the toes and sole to the shins, thighs and waist would generate a lot more electricity, especially if running.
is rectifier really necassary for this project ?
Mind blowing idea
sir i have a question that which paste you use to paste the electric generator with sole
Silicon adhesive
Amazing video… why did you put the solder on the piezoelectric first and then solder them together?
It’s a good soldering technique/trick. Similar to tinning a wire
Thanks a lot! I will be making this for my school project.
Do you succeed in building your prototype 😢????
Brother, the project is useless, the poor thing is more than 3 times
good day sir, can i ask if it's possible to make it water proof, because in our country, anticipated thunderstorms occurs😊
I really like the idea the only flaw I see that would make this less usable is maybe the longevity of the piezoelectric pads? I’m unsure of how long they’d run for. Also waterproof but that’s not a hard fix. Great!!!
You are negative
thats what I was sayijng. that design would only work for so many miles.
Then fall apart
To work so long what should be corrected here?
How much time/steps/distance will it take to charge a 5000mah battery.
Or how much mah/volt energy is produced after 100 steps for both legs. Please answer ASAP, its serious.
in the video i walk 2 hours for this energy
@@skillmake how much did the mobile get charged from walking for 2 hours
@@vaibhavvajpai1481 ~3.9V - 3.5V = 0.4V would be my guess.
@@Rocksidioncan I ask how did you calculate that , explain??
@@zafaralimengal2609 At 8:50 he shows that he starts with 3.51V. At 9:29 (which the creator claims he walked for two hours), the Voltage increased to 3.90V. Just calculate difference and you get the total. Simple.
Elektronik Malzeme listesini yazabilir misiniz proje odevimiz için lazim
I write in video
Fun fact : I just got same idea a few days ago
what type of board did you use for the base?
Same query
How u got answer of this
Sole board
Bro, may I ask, is it fine if I add 47microFarad 16V capacitor?
Sir,which material you use to locate the pizeoelectric disk
PVC pipe cut n heated into sheets
Could you maybe link the battery that is used?
no battery used there
Can u please provide a circuit diagram
What is the first item used?
Can i use diode 12 volt sir?
Please answer 🙏🙏
Hlo sir please reply mujha kuch confusion ha please reply sir my cammnet 🥺
Assalamualaikum, good job bro 😂
Thanks 😅
Shoes might blow up or shock you while in a pool of water.
No
@Tech Gamerz (by Sorish) puddles???
Shoes in pool .........strange...
@techgamerzbysorish3118 during rain or in puddles
Lol no, it’s slightly more than the voltage of two aa batteries, it’s impossible for this to shock you in a way that would hurt whatsoever
Might change shoes before going on a plane.
what is the specification of battery? i mean is it 3.7 volts 2500mAh battery?
Bro circuit diagram pls
How to charge the super capacitor using your circuit diagram
Can someone plz tell me the list of the components used in this i am doing project on this please help me..
Sir by using each bridge rectifier diode ckt to each piezo plate,the size and the wires used might become more complex know sir??
Yes, you are right .But you can use chip bridge diodes
the connection of piezo is in parallel right?
Hello i really love your video and your way of thinking i will really like to work with u in such a project
How much voltage is generated by walking 1 meter or say that how much voltage is generated by walking how many meters
Please reply
Each step produces 25-35 volts, but the current intensity is low
@@skillmake current intensity is how much??
GREAT !!... Très ingénieux 🧠 💡 👌🏼👍🏼👍🏼👍🏼...
BRAVO !!! 🛠️👏🏼👏🏼👏🏼...
🙏
@@skillmake 😀👍🏼
Is it waterproof?
What is the cost of one piezoelectric disk, which is used in the above project?
I have just Buy the piezoelectric it cost 25rs.
Wow great it's an best project ever, I have some queries while trying this project can you please give contact info please, can you please help me do please
Hi i am working on this project can u please provide me circuit diagram?
18650 make a powerbank alon what is the porpus for ihes fazoool video
I’m making the same porject but my piezzos doesn’t produce more than 0.1 volt, I don’t know why, I should produce 30v
hey man, just wanted to know what happened to your project?
it might perform a little better if there was rectifiers coming from each piezo to help from back feed .
But one question won't the piezo brake easily
Very good 👍
ویدیو ندیده میگن خوبه
اره والا 😂😂
Thank you 👍🙏
can we use 3600mAh battery instead of 2400mAh battery???
видно что оторван провод!!! и зачем 2 диодных моста ??? что за бред?
Useless thing 😮 how to generate electricity with steel stripes
😮😮😮
Fake video
Give answer
Bhai kitna paisa laga aapka
can u make same wireless charger one?
Bro tell me one thing piezoelectric device can generate AC current then how mob get changed
Can you help meh to answer my questions
1. How to make it fast to charge power bank in least steps (it can be done by increasing number of disks from 6 -> 12 ) or improveing bridge rectifier/ or both??????
It is actually a part of my FYP.
I need to charge that shoes in least steps as possible
Also suggest Me micro components if you can for Disks/rectifier/charger
Please sir,
Hello my friend. The faster you reply, the better it will be for me. What is the name of that spongy material in minutes 6 seconds 3?
Sucks you chose the heel.. really not the most active part of the shoe.
Amazing projects , my friend .
Many thanks
"free" lol misleading, you walk therefore you put pressure energy in there.
how many amperes is the diode?
is real?
💪💪💪💪👍👍👍👍❤️👏👏👏
Great, now, let's dress up and go for a job interview.
😂🙏goooooood
😂🙏goooooood
Where is the bms? Also I dont think that 3.9 volts are good for the battery.
what if you get wet, WITH WATER... what are you going to do?
Süper ❤😊
Is it safe to cut piezo element to thinner pieces 🤔
4:40
How much money 💲 total its got to do this
Hello guys! Why does he connect the (left) top and the bottom piezo together ?
(With the red and black wires)
How many power of bettery
how long would it take to whare a normal phone? Like an iphone 6
How much energy generate in one day?
Friend how do we connect a diode to each piezo plate I need more power pls reply fast
avoid thes video time loos
is this actually true
Sir used one sheet no what is that name sir starting is that foam sheet or some other thing
So is that a rechargeable battery?
It's Indian RUclipsr idea
What?
Sir can you please explain the whole process....I'm actually a student and I'm making a science project based on electricity generation and I loved your idea but I'm unable to understand
by just reading and making sense of it. i can help you on that. you just use the piezoelectric modules. that will give power to a power bank. that already has a charging system on it. its actually easy
Basically, those piezoelectric discs can generate vibrations when activated by electricity, and vice-versa, they generate electricity wfom bending. Like you can use them to create a simple buzzer (generating vibrations), or use it as an accoustic guitar pickup(it converts vibrations into electric charges). After these piezoelectric discs the diode bridges are located. They are there to direct the flow of energy, for the discs not to start using the battery instead.
excuse me Sie, could i ask what is name of the charging modul? like a type of that modul, the code number etc? please Sir
5 volt power bank module
@@skillmake yeah thanks a lot🙏🏽
Can I use cardboard for the base
Dude i feel some like a smoke ..😁😁😁
That's awesome
What is installed under the insole? Is it foam?
How much current does it produce?
what is the grey thing in between de discs and de glass?
Bhai ese video post mat karo shaeb class me Batvta he jai Shree ram ❤
Good Idea! But If... IF you were designing Those FOR ME!! YOU WOULD BE AFRAID! I weigh 235 pounds and I am not fat. I am overweight by like 35 pounds I do roofing and construciton though. but can only work part time now cuz I have falso hips and a bad left wrist
why did you connect it to a battery before connecting it to the power bank charging module? can we just connect it to the power bank or would that make it less efficient?
The output current is low, so we have to charge the battery first and then use it
Hola y si no tengo zapatos :,c
piezoelektryk
Please make the same video with voice explaining the materials used.
Do we have to take 3.7 rechargeable battery or simple one.
you can take any battery there is no matter of battery
Very usefull
Ahh piesos evrivere nice idea
Love it
How many amps is in this circuit?
The output is very weak, but it is really useful for urgent situations.
@@skillmake you can increase the number of discs
WoW Nice
Thanks 😉🙏
Any wire works? Or what type of wire do I buy. (I am beginner)
you can use any type