Autodesk inventor Create Spiral Staircase with Sheet Metal Exercise 46
HTML-код
- Опубликовано: 3 май 2024
- Creating a spiral staircase with sheet metal can be a fascinating project. Here's a simplified step-by-step guide to get you started:
Design and Planning:
Sketch out your design on paper, including dimensions for the staircase's height, diameter, number of steps, and the angle of rotation.
Decide on the type of sheet metal you want to use, considering its thickness, strength, and appearance.
Materials and Tools:
Sheet metal (preferably pre-cut to the required dimensions)
Metalworking tools such as shears, a brake press, a welding machine, and a grinder
Safety equipment including gloves, goggles, and a welding helmet
Cutting the Metal:
Use shears or a cutting tool to cut the sheet metal into the required shapes for the steps and the central column.
Ensure precise measurements and clean cuts for accuracy in assembly.
Forming the Steps:
Use a brake press or other bending tools to form each step. The steps should be curved to match the spiral shape of the staircase.
Depending on your design, you may need to add reinforcement to the steps for stability.
Constructing the Central Column:
Cut and shape a metal rod or pipe to serve as the central column of the staircase.
Weld or bolt the steps onto the central column at regular intervals, ensuring they are evenly spaced and aligned.
Assembly and Welding:
Assemble the steps around the central column, starting from the bottom and working your way up.
Use clamps or other securing methods to hold the steps in place during welding.
Weld each step securely to the central column and any necessary reinforcements.
Finishing Touches: Наука
well done sir
very interesting tutorial thank you
❤❤❤❤🎉🎉🎉🎉
facebook.com/share/v/vMJLKsBQKV9dWZcQ/
How create a single part in 2d drawing sir
do you mean how to select one single part from many parts and create drawing fort that part ? it is easy if you have a model consist of many parts , the first think you mast do make COMPONENTS . in order to separate all parts so they became independent . then double click on the part you wont to create drawing for , then open drawing template and start . very important you have to MAKE COMPONENTS .
see my tutorial , if wont to know how to make components .
i hope you find the answer sir
@@SolidCam-Cad no sir for example of we have a assembly with some plates and we generated a 2d drawing for that assembly in that that drawing I need to get every single plate part in the same layout is that possible
@@lakshmaiahnaidu ok, just on the assembly you chose the plate by double click on that plate the it will separate from other part so you can create 2d drawing for that .