BLM Guide To Using Lead Pointing Sealant
HTML-код
- Опубликовано: 24 сен 2017
- BLM Lead Pointing Sealant is specifically designed for pointing joints between Lead and masonry or brickwork; a low modular, non-corrosive, neutral cure silicone sealant which can be applied easily using a mastic gun.
BLM Guide To Lead Pointing Sealant is a how to do video on applying Lead Pointing Sealant.
Great video and good instructions. Just smile 😉
After all the work removing the grouting surely just applying a good grout mix as was taken out would last another amount of years...
So simple but helpful
Bn j
Does this work on rubber /plastic flashing?
how many tubes do I need for a 9 metres run?
Don't use this if your house is south facing. The lead pointing sealant failed during summer hot days. It became weak and was cracking
Hi @4k3el, what is the alternative? I have exactly the same issue. It cracked in time and let the water go inside.
@@ciprigaboruse sand and cement
A hate sealing its messy asf
How can we remove overspill of the lead sealant?
Masking tape first
I have used the Souldal equivalent lead sealant and it works very well,better than mortar.Just make sure the area is very clean,no dust or dirt.Very sticky stuff.White spirit does take it of if you get it on your hands or anywhere else.
Just use low modulus clear sealant... Much neater finish.!
Used low modulus on lead for years,much neater and less messy to work with,a good old bita spit on the finger to smooth it off and the jobs a goodin
Where can you buy this?
Have you heard of Google?
Roofers can't point ... simple .