As a student currently enrolled in an AAS degree in Diesel Mechanics and Heavy Equipment taking heavy brakes and CDL Prep, I can confirm to this day the information taught to us has not changed at all
They cover air brake systems in great detail ... right after they tell you that nothing they say should be trusted, and that if your brakes fail and you run over a Smart Car, killing a family of four ... it is not their fault.
Question: this is the process of the supply system = compressor built air and send to the air dryer => governor => supply tank …. Air going over 120 psi governor stop the compressor or the compressor still building air (don’t stop) …. just don’t send more air to the air system?
If you are able, purchase other textbooks to go along with your studies. It's what I did and it helped. Older books may be dated but they do a better job of breaking things down to a level one can easily understand.
compressor are mounged on the engine. there actual locations vary depending on the engine. the governer may be mounted to the air dryer, but can be placed any where and connected by air lines.
Thank you for the video!!! I’m laid up after knee replacement surgery. I am the mechanic on the farm-ranch. This is a very nice refresher course.
3:35 intake ; 3:57 compression; 4:23 two cylinders; 4:43 coolant system
5:44 governor; 6:21 cut-out pressure; 6:51 from governor to compressor
7:37 cut-in pressure; 8:50 safety valve
I almost took the CDL test in Canada in 1992..I remember reading the 'air brake manual' and still have it somewhere.
As a student currently enrolled in an AAS degree in Diesel Mechanics and Heavy Equipment taking heavy brakes and CDL Prep, I can confirm to this day the information taught to us has not changed at all
They cover air brake systems in great detail ...
right after they tell you that nothing they say should be trusted, and that if your brakes fail and you run over a Smart Car, killing a family of four ... it is not their fault.
Question: this is the process of the supply system = compressor built air and send to the air dryer => governor => supply tank …. Air going over 120 psi governor stop the compressor or the compressor still building air (don’t stop) …. just don’t send more air to the air system?
thanks man I can use this to answer my questions for achool
thanks you very much for your help me by this video. i can gain more knowledge
Great video! it helps me a lot
great work.
I need an air drier!
Para donde es el sentido de giro para q cargué más psi
thank you
Im gaining more knowledge then classroom, but i still have tp appear in class room /lab courses in Diesal class
If you are able, purchase other textbooks to go along with your studies. It's what I did and it helped. Older books may be dated but they do a better job of breaking things down to a level one can easily understand.
Can you recommend some good books?
great! thnx
BIG TNX
where is the guvernor and compresor ?
compressor are mounged on the engine. there actual locations vary depending on the engine. the governer may be mounted to the air dryer, but can be placed any where and connected by air lines.
The compressor will be found in the workshop and the guvnor will be found in his office 😉
It’s probably best to look at your particular vehicle manual. Most school bus you can find them under the hood.
so is this is same with all air brake system cars
Which cars has aur brakes
Lmfao 😂
open the drain cock daily and drain the water and oil onto a pavement . multiply this by millions of trucks= lots of oil on the pavement
That’s why they created the accessory thank or pick thank … this tank collect the oil and when you drain the air tanks just coming out water 👍