Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
4:57 This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013 Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos. I'll let you fill in the blanks there.
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
I thought it was sick with the MachineHead DVD in the last one. I guess you listen to some great metal. Do you know nothingface? That's what my sn comes from. Anyway, I love your channel cowboy! Like a ten ton hammer
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
i will!
Better not be click baiting us bro.
Jacob i have a jailbroken PS4.
👌
@@Niko_BellicfromLibertyCity nice
This Xbox was underneath the toilet… cool - Jacob R
I always keep my Xbox under the toilet!!
Where it belongs (airhorns)
@@gregchandler900same who doesn’t
🤣@@RenegadePandaZ
The last wii is probably a pre-2008 wii considering the WSC banner is old
The Last Wii was created in 2010 I think
@@BoneyOfficialooolast as in the last shown on video, not literally the last wii
@@MCWiirdo ohhhhhhh
4:57
This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
never ever bridge the points it may not cause damage at the time but it will later, ALWAYS replace the part
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
@@jsteezy80 Josh Davidson himself said that you can just bridge the points just fine
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013
Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
Him: give me free game
Wii: turns into a cicada
I put Mario party 9 into my Wii and it did the same thing
Love these videos Jacob been a big fan for ages
Let’s go
@jrob0021 same wish I could bid on PvZ on whatnot but it's too expensive to ship to UK rip
5:00 that's an easy fix if you know how to solder, you just need to replace the six resistors near the CPU.
Him: *turns on the Wii*
The Wii: *bug sounds*
I was surprised that the second Xbox worked seeing how beat up it was.
Dude broke the wall
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
looked like one of those stickers that look like a hole.
Was not expecting that ending
Me Neither LOL
I don’t think that’s how you’re supposed to break the fourth wall.
13:24
thats blur. Awesome Arcade Racing Game with Power Ups and stuff.
I love your content. It's really chill
Something that has caught my attention, is that you never check the mii parade.
THATS MY XBOX
Prove it 😂
Very cool
nuh uh
Proof?
X to doubt
The hole n the wall killed me 😭😭😭😭
I need some more videos!!!! Love your content Bro, I find your videos so interesting. Is it time for another one yet? Lmfao😂
The overheating RAM error code is often just 0 ohm resistors that went bad, you can remove them and bridge the pads and you’re off to the races.
Lmaooo I really thought you were gonna make the strike!
17:51 a Wii that still has Internet Channel as a Trial Version… that’s rare.
Gat bobble head is from Saints Row. Johnny Gat is a character from that series.
W
@@P5Kapalott Peak pfp
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
This is your niche. Good job!! Holy views!!
Hi! Love ur content keep it up!
Joey and Bald-e-locks is 100% a Expeditionary Force reference
when jacob r uploads its a good day
11:14 I was not expecting to see ATLA
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos.
I'll let you fill in the blanks there.
Jacob is the master of Xbox passcode cracking
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
It's just metro v1. It's the first version that came out before the current one came out
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
5:00 this is a temp sensor issue. common problem. it can be fixed by switching out some broken resistors.
4:51
My Xbox did the exact same thing. I fixed it by removing and soldering back the R4D3 resistors
4:55 i have an xbox that has rgh, on freestyle launcher, you can change the speed of the fan. that may have happened with that one.
"Is DKOldies a scam? No."
EEEEEEEEE!! now that jam is stuck in my head 😂😂
18:56 it’s got the old version of Wii Shop Channel!
What is "the texas load"?
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
Four seasons, no sound o'death.
The Texas Load I love that intro
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
Gat Bobble head or whatever is Johnny Gat from the Saints Row games I'm pretty sure
I read that thumbnail in Joey’s voice lmao
Check out more old 360's Jacob R! your videos got me into buying and fixing old 360's. i want to find a console with the blades dashboard too man!
I wonder do people ever come across their console in your videos that would be cool lol.
I thought it was sick with the MachineHead DVD in the last one. I guess you listen to some great metal. Do you know nothingface? That's what my sn comes from. Anyway, I love your channel cowboy! Like a ten ton hammer
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
13:24 Beats? Nah, that's the Blur logo. Blur was an awesome arcade racer. Check it out if you haven't.
Him: turns on the xbox
The xbox: 🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵
4:52 its the red ring of death i think its called
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
Omg my Wii is in the video don’t worry I have another
You won't find one of my old consoles because I still own them all.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
That GAT is from Saint's Row and it's an unlockable avatar reward lol.
Real mfs remember the Red Dead redemption Avatar outfits
why does my xbox 360 take a few minutes to boot up, also it's really loud
10:22 lol how dare those ps3 owners responsibly factory reset their ps3s before selling em
Ikr
the GAT bobble head was from one of the saints row games he’s one of the main characters
THATS MY MATTE BLACK XBOX!!!!
Happens so much try selling on local market places people mess you about people can't be dealing with that and just give it away
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
The first Xbox got a NCC logo near the power socket.
Is that from Taiwan,ROC?😮
THATS MY TRIAL VERSION OF SLENDER THE ARIVAL
🤨
Under 1 hour gang
👇
Yeah
me
@@KoopaNutz5000 who is beggar??
@@KoopaNutz5000 also i just wanted to see how many people reply before that 1 hour
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
Funny you got mario kart when you had a open mario kart case next to the console?
I GOT YOUR TEXAS LOAD DOWN HERE
How’s ya head bro 😂
are GC saves stored locally, or memory card only? i assume they are memory card only which is why you don't check
Yup, Gamecube saves are only meant to go on Gamecube memory cards.
Summer break for you? Not a chance.
The Johnny got Bobblehead Is from Saints Row the Third
THATS MY GTA V SAVE FILE FOR XBOX 360😮
i wonder what bro will do when he cant find anymore of these in goodwill 🤔 maybe the people who buy them from him will give them to good will
the profile with the website at 14:02 is disney's toontown, not sure why they linked it...
maybe the data breach of sony made their users a little more cautious giving away stuff with personal details on it
Why do you have dkoldie guy in your thumbnail??
You forgot to check for Miis. :)
I have a video suggestion: trying PAL games on an NTSC tv what happens?
8:30 he indeed does work at DKOldies 😂😂
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
Yo w videos
That website leads you to the disney store lol
I bought a toilet and found out that it also takes Wii’s
19:44 bro got mad
These videos are peak
i just barely saw the yellow hole. you gotta look closer, but it’s visible 👍 5:37
Is this from DK oldies.
Gat bobblehead -> Johnny Gat from saints row.
Gat bobble head? I’m pretty sure that’s from the saints row games
I think Goodwill is starting to catch on and see your videos and take the games out of the systems sadly
Gat is a character from saints row.
I was waiting to see your Wii, what happened?
I need a dkoldies follow up.