Tubular Truss - Clerestory Roof

[@mariavilmatulalian8221]

Beautiful house Draw-up PRO the is Perfect Designs who is archietec design this home 🏠 i like this kind video. Thanks your sharing tips..

[@DrawUpPRO]

Thank you too

[@joelpenafiel5393]

May idea na ako sa bahay ko salamat sa pagbigay kaalaman.

[@DrawUpPRO]

Salamat..

[@djmerdaerobles6772]

Thank you for this content na dagdagan Naman Yung kaalaman ko 😊

[@DrawUpPRO]

Salamat

[@romiecubal5975]

Very informative. Thanks for sharing

[@DrawUpPRO]

Glad it was helpful!

[@armandoabonitalla9373]

ang ganda ng design idol...👍👍👍

[@DrawUpPRO]

Salamat...

[@SimonKavaro]

That is so wonder ! I'll have this plan you, thanks.

[@ArnoldPalero-j9x]

Thanks for sharing, sir! Keep safe and god bless.

[@DrawUpPRO]

Thanks, you too!

[@pirateph4799]

Thanks for the ideas

[@DrawUpPRO]

Most welcome 😊

[@shetemaroti31]

I have the following comments on the video are as under for health& safety of the people and the structure:
1.Thickness of material used shall be minimum 3.2 mm so that welding can be done. Less Than 3.2 mm thick will make holes in the tubular and 2.5 mm diameter welding rod shall be be used.
2.Thickness of metal sheet for roofing shall be minimum 0.5thick.
3. Cross bracing shall be provided to take care of uplift due to wind.
4.Spacing of purlins shall be maximum 1.2 metre centre to centre.
Design of roof shall be done by a structural engineer who has knowledge of steel structure and local condition.

[@DrawUpPRO]

Thank You

[@mamyswan79]

Thanks a lot !

[@mosam5097]

This kind of house i want built in Bangladesh with similar roofing, but I didn’t understand how did you secure the fascial board or longspan roof? Please show more real life fittings video

[@divinebuadoo2618]

Great work

[@mercysalidaga8109]

Napakaganda ng design yan ang gusto kong design sa aking bahay balang araw mabuhay po kayo sir

[@DrawUpPRO]

Salamat

[@Charmpainter]

What is the stmated cost po

[@datubimboromatho4506]

Salamat sa vedio ninyo.

[@DrawUpPRO]

your welcome

[@ripinoyjapanvlogslife6604]

Nice vedio sakto sa hinahanap ku na cost para sa trusses at roffing

[@DrawUpPRO]

Salamat

[@123JAM-s5l]

your the best

[@DrawUpPRO]

ty

[@arch.l.a.deleon445]

👍👍👍 Great good videos like this, must be known, detailed and clear to understand processings, thanks

[@DrawUpPRO]

Glad it was helpful!

[@arch.l.a.deleon445]

@@DrawUpPRO ❤👍

[@bilalbhai4899]

Nice 👍

[@castilloag9804]

isang ihip Lang NG bagyo Yan..lipad agad atip nyan

[@MenandroDijamcoQuiling-qt3kp]

Basta sigurado ang pagka-angkla ng truss sa concrete beams at kumpleto ang cleats ng purlins sa truss top chord. Karagdagan tibay dapat may structural analysis ang cleats , anchor details, kahit 200km/hr na hangin kaya

[@user-bw4kj8vh7o]

nice design..

[@DrawUpPRO]

Thank You.

[@DicksonRuben-g3d]

Good 👍 very nice

[@ArbeRamos]

🎉 nice

[@nozyvyne]

nice video

[@DrawUpPRO]

Thanks for the visit

[@DETALLES2024]

❤❤❤

[@DrawUpPRO]

THANKS

[@jamalodingmacalimpao3120]

Thank you.

[@DrawUpPRO]

You're welcome!

[@arsadabubakar5279]

Thank you very much for the tutorial video.Amazing..

[@DrawUpPRO]

You are welcome 😊

[@CrisantoNazareno-wm3sw]

nice videos, helpful

[@DrawUpPRO]

Thanks

[@regineannsalgarino5266]

Napaka ganda idol

[@DrawUpPRO]

Salamat

[@romeoramos2371]

VERY INSPIRING HOPE I CAN MAKE IT

[@bobm3477]

Would it be possible to put the smaller roof up top, extend the height of the walls and have a loft for that part of the house?

[@josweetrabahomix1653]

Thanks for your tutorial video very informative.

[@DrawUpPRO]

Glad it was helpful!

[@robertwadwadan9635]

Ang galing ⁿ

[@DrawUpPRO]

Salamat

[@reybuenaventura5616]

It is cost efficient and good design but can withstand against strong typhoon like hainan ( yolanda) and rye(odette)? Just asking.

[@moviemagic1604]

Good

[@DrawUpPRO]

Thanks

[@bagainemersonm.2715]

An example of very informative video. Nice design thank you.

[@DrawUpPRO]

Glad you liked it!

[@JoseSabido-c8v]

Maganda pagkayari

[@DrawUpPRO]

ty

[@stevetari3990]

Great Video,I just want to know the thickness of the C sections you use?

[@DrawUpPRO]

1.5mm

[@Bhongski]

nice and very interesting i like it boss😊

[@DrawUpPRO]

Thank you so much 😀

[@Loverboy_Bernice1977]

Great!

[@DrawUpPRO]

Thanks

[@kaciociovlog8830]

Good job

[@DrawUpPRO]

Thanks

[@guidoacurio3050]

gracias por compartir

[@DrawUpPRO]

Gracias también

[@murod78]

Nice design 👍

[@DrawUpPRO]

Thank you so much

[@VictorMaluya-f3s]

What type of roof framing, thanks,

[@DrawUpPRO]

Tubular frame

[@donanyamajid8826]

Mantap boss

[@juliogarcia7235]

EXCELLENT JOB

[@DrawUpPRO]

Thank you

[@rengeronig9695]

. . . it's much better if you could hilite sag rods and cleats with a different color so viewers can see & distinguish which ones you're talkin' about . . .

[@DrawUpPRO]

Thank You

[@summercel1101]

Wow very impormative.
How much costs??

[@DrawUpPRO]

Thanks

[@aledzbuilders]

Nice video inspiring 👍

[@DrawUpPRO]

Thank you 🙌

[@jenniechiong7471]

Ilike to follow roofing for my garage ext.

[@DrawUpPRO]

ty

[@zarahlanzado8328]

Nice

[@DrawUpPRO]

Thanks

[@rifai2788]

Bgus buat rumah desa

[@DrawUpPRO]

Terima kasih banyak-banyak

[@marialuzcampo5229]

Thank you very much po! very informative video..

[@DrawUpPRO]

Glad it was helpful!

[@stephenmulholland4868]

It seems like water can be blown into the house under the overhang?

[@arturomiras5087]

👍 5 Star..

[@DrawUpPRO]

Thank You

[@werewhit-jz5fh]

[@Coolsweat67]

USE HRS STEEL FOR TRUSSES, BOLT IT OR WELD IT. DYNA BOLT CAN BE USED TOO PO . SALAMAT

[@arlynsumalpong8125]

Wow

[@DrawUpPRO]

thanks

[@actionhorrormovie2858]

Sir how many degrees the upper and lower design...?

[@DETALLES2024]

great

[@DrawUpPRO]

...

[@julianelias3338]

a good idea

[@DrawUpPRO]

Thank you

[@ms.winwyn3260]

I like it very much thank you..

[@DrawUpPRO]

You are most welcome

[@zarahlanzado8328]

Can you give mi the floorplan..thanks

[@DrawUpPRO]

Small Modern House
ruclips.net/video/OlB_u8OtaZo/видео.html
#detalles #drawuppro #keepitsimple

[@jeoliusbacalso3564]

total cost of tubular truss...

[@DrawUpPRO]

nasa video po lahat ng materials. depende po sa location po yung cost.

[@charlesdean9178]

Mas nakaka save ka gumamit ng tubulars kaysa sa typical angle bars o C-trusses. kasi yung square tubes ay napaka sturdy in all lateral stresses' kung kaya menos ang pag gamit ng vert and diagonal truss members or cross bracing. Ito na rin ang palaging gamit ko since nag mura na ang mga 2.0 - 4" to 6" G.I. or B.I. tubes

[@emaloubael2343]

Thank you... Very nice

[@DrawUpPRO]

Thank You

[@VictorMaluya-f3s]

❤Anong design po yun na roof framing, salamat

[@DrawUpPRO]

Clerestory roof

[@mzkariah11]

Thank you big help😍

[@DrawUpPRO]

Glad it helped

[@denniscelis7995]

magkano po ba ang cost kung ggwa k ng ganitong bhay po ngayun dyan from scratch. salamat.

[@muhammadraees7674]

I want to fix in my home.. how can I contact you..?

[@DrawUpPRO]

facebook.com/Tektontact.Briareus

[@caloy658]

good video, very informative, love it

[@DrawUpPRO]

Glad it helped

[@sadiq221]

youtube.com/@sadiq221 plz

[@nikkaemeliegepiala6307]

Ty

[@elkiemalonzo1259]

estimated cost for the whole house?

[@undo7711]

what does "LNM" means?

[@DrawUpPRO]

Linear Meter

[@abelardodiwa8032]

lovely

[@DrawUpPRO]

thank you

[@bedfill]

I WANT THIS

[@DrawUpPRO]

TY

[@johnemilmatanguihan6542]

Estimated cost for that kind of roofing?? Thanks

[@geoffreyvonmarkirada8823]

May I ask if it is matter how to put the C purlins does putting this way "[" or this "]" matter when putting in this angle /?

[@mrphoto_fix]

based doon sa video illustration, pag galing sa taas, [ ganito siya, pag baba naman ito na sya "]"

[@reyellaga8989]

How much total xost

[@junerobertvillamor6143]

pede po ba maka hingi file nito?
or pic nang top side and front?

[@leonardoramos6746]

3 bedroom haus with tubular (5x7= 35sqm ). Magkano po estimsted cost of construction..,?

[@edgarsdiytv5535]

How about down spouts? Are you going to expose them with that kind of roof?

[@mc-iveenpanganting2569]

Name of apps idol?

[@DrawUpPRO]

sketchup bro.

[@amputilayag2710]

Is it wind resistance 🤔

[@roselynpaulino8246]

same question

[@myrnahall6168]

can you still put insulation on the roof???

[@johnvincentsanchez6752]

Hm kaya aabutin pag natpos po ito sir? Salamat sa sagot

[@DrawUpPRO]

list of material ng roofing meron po sa video.

[@albertoalipao8120]

Pwd po bang makuha ang sukat ng king post ng bahay na ito salamat po sa sasagot

[@DrawUpPRO]

#drawuppro #keepitsimple
Interior Design Ideas for Small House
5mx7m Modern House Design - 3 Bedrooms
ruclips.net/video/lIuz8wWHkEw/видео.html
#TinyHouse3d #3dHousePlans

[@DrawUpPRO]

#clerestory #tubular #kingpost
Clerestory Truss Design - Tubular Truss
ruclips.net/video/zN7uqgab1HA/видео.html
#drawuppro #keepitsimple #estimate

[@viceapa4691]

Delikado yan sa super typhoon, lipad yan.

[@sylviaatunayalojado3057]

Ganda nga pero pagdating na typon Walang matira khit isang bubong

[@trixdelesvlog7875]

Ask ko lng po ganito style din ng roof sa pinapagawa ko ng bahay,, pero ang magkaiba nga lng yung sa akin sa front yung open roof niya,,hnd po ba delikado sa ganitong style sa mga bagyo? Or hangin? Matibay po ba yan,,salamat sa sagot godbless

[@jassenrondina6933]

mas maganda po sana kung included din sa vid yong mga computations nyo po for complete guide na din sana. Pero very helpful po tysm.

[@DrawUpPRO]

Salamat

[@franzdelrio6891]

Magkano lahat gastos practical at affordable sa budget

[@chitoramos681]

Pano ka maglalagay ng cleats dun sa dulo ng rafter?

[@DrawUpPRO]

used rebar

[@azzi9277]

👌

[@marcelloem290]

Sorry to say this roofing style is not really typhoon proof

[@GoetzFamilyAsia]

In Thailand, many houses are built this way. Ours is built that way too

[@jgomera1214]

Good day!
I have a question...
Uh hmmm. If I try to look back and base my observation on my theory of structure subject, the structure of these trusses looks unstable, right? Or I just overlooked something? If someone could answer, please, enlighten us. It will be a great help for me and for others that could read this thread...
thank you!

[@DrawUpPRO]

#detalles #keepitsimple #drawuppro
Interior Design Ideas / Small House 5 x 7 Meters - 3 Bedrooms
ruclips.net/video/MlWO3mIC1VA/видео.html
#smallhousedesign #tinyhouse #simplehousedesign
#interiordesign #modernhome #3bedroomhouseplan

[@celyl]

I wish content providers include their target audience, origin, costs to build. Not all designs fit every region. I guest the cartoon imagines, it's never been built.

[@lorenzolovedorial7931]

matatag po ba yan sa bagyo?

[@DrawUpPRO]

Nasa pag gawa po yan.

[@mhajhachannel1296]

sumasayaw, nakaka hilo bok...?

[@DrawUpPRO]

pasensya na...

[@luizadomingo2821]

Ganito style Ng bahay ko and I using tubular🙏

[@laylakandum5745]

Thanks so much.... Magkano po Ang na incur na expenses nito?

[@DrawUpPRO]

nasa list po yung mga materials.

[@johnvincentsanchez6752]

Sana malaman po hm mtpos po ito

[@DrawUpPRO]

list of material ng roofing meron po sa video.

[@nicolasformarejo2111]

What is LNM means ?

[@DrawUpPRO]

linear meter sir.