Professional Bodyshop Said This Was a Total Loss! Amateur Rust Repair.
HTML-код
- Опубликовано: 29 сен 2023
- We are back with more extreme rust repair on the 1966 Chevy truck. It's time to replace the floor, rocker panel, cab corner, firewall, etc, on the drivers side. Also, a quick tutorial on plug welding sheetmetal with the Mig.
If you found this video useful and would like to help support the channel, please check us out on Patreon.
/ carterautorestyling
Or you can send a donation via Paypal www.paypal.com/donate/?busine...
#Carterautorestyling #rustrepair #migwelding #classictruck #classiccar #restomod #migwelding #1966c10 #restoration #customcars #hotrods #classiccars #cars #fabrication #metalworking #automobilererpairshops #bodywork #autobody #autobodyrepair #rustrepair #car #classiccars #hotrod #behindthescenes #sheetmetal #custom #metalshaping #fabricating #classiccar #metalfabricator #metalfab #trucks #gmc #chevy #tigwelding 
Авто/Мото
You do excellent work and I always enjoy it. The Plymouth Road Runner was a fine car.. and the first music you put on was the best..I'm an avid fan..and I'm 85 watching your program and taking care of my semi invalid wife of 62 yrs Paul in Ohio..
Thank you Paul!
The addition of the musical interlude provides a nice touch to your informative videos. Thank you.
Glad you liked it!
Yea.... about that mob... you owe me for the catering and port-o-pottys. On a completely unrelated note... Last week I had my first experience with a modern mig welder and thanks to your videos it all went very well, for a beginner. I followed your teachings by first tossing every tool I own on the floor and mixing them toughly with the garbage. I had my doubts but I got excellent results. Cheers from the Shed
It's nice to know that you've actually been paying attention this whole time. Most people overlook that critical step and are never able to successfully Mig weld.
You have traveled a great distance grasshopper--but you have many more miles to travel...
Thank you for today's video Kyle. It has made me realise that poor life choices and apathy aren't something I should be ashamed of.
Hahaha thanks, I'm glad you were able to get a worthless life lesson out of this!
Don't understand why this channel is not more popular. It ticks all the RUclips boxes: cats, drama, welding and grinding, sarcasm, ...
Plus he lights himself on fuckin' fire occasionally!
Haha I think those are all the things that prevent a channel from becoming popular
"I need it to get to work tomorrow " 😂😂😂.
Take it for what it's worth. You are a true craftsman and I am impressed at your attack on this rust bucket. Great video
Thanks Greg!
I remember replacing rusted out body metal using sheet metal screws and new metal then covering the inside with tar. That was before we could afford a oxy acetylene torch. MIG welders were just a dream back then.
That was a beautiful Road Runner! Those self installing body panels must be pricey. Thanks as always.
Yeah you pay a premium for them, but the time saved is worth it
"Self tappers, grinder, seam sealer - throw some bonds over it.." you just described 90% of the "restoration" work I've seen lately.. Great job on those rockers and floor sections. I've been enjoying this series a lot! Thanks!
I agree. Even some people showing others how to f uckup .And it makes things much more difficult to repair correctly. Thankfully restyling is awesome 👌
I'm glad to hear that you and Shed by the tracks have come to an understanding. I may have given him a piece of my mind, if I did it was more likely than not, something backing your point of view. Just doing what I can to promote world peace.
Thanks Paul, I appreciate that!
I really love the yellow wheels for some odd reason it works very well. Very nice car.
Yeah it is a nice car!
Thanks!!
A shining example of when the pro says "No", the amateur goes "Hold my beer, watch this".
Nothing to do with not being able to do it, it is about fixing it economically. These pro shops are profit driven, so anything beyond their pay grade, they will decline.
I really enjoyed watching the cats trying to fit a patch panel onto the wooden floor!
It was very thoughtful of them to try!
If your truck identifies as rust free, then it is. Job done! 👌
Oh my God I'm sitting here laughing
@@daviddeloera711 I knew at least one person that watches Kyle's Hair Styling would appreciate my humour! 😉
This is 2023. Plywood now identifies as a floor pan and 2×4s identify as rocker panels. Get with the times!
Another great video.
Thanks.
Bondo is life. If you threaten that rocker panel it will go on crooked just for spite. I've had that happen more than twice. Are you feuding with that Cold War Moters guy ? Tip over his outhouse. That'll teach him.
Hey thanks for the outhouse tipping idea! That will show him!
Very impressive, this upload… Glad to see your Patreon list growing!
Thanks so much for being a part of that list!
I admire your work, so inspiring and educational !
Thank you!
As always, a very entertaining video. Poe appears to be increasing his bread tie skills.
Thanks George!
Do your best and fill the rest. That rocker panels family deserves it.
Glad you agree!
Crazy how much rust is going on there. Keep up the excellent work. You will conquer 💪
Great video Kyle! You're really stepping up your editing with music, impressive!
Thanks John!
You do the amazing work very good fabricator and welder
Thank you very much!
It's probably good you were born in Canuckistan. I'm here at the Duct Tape Drags in Tucson, Arizona, and there is a huge herd of rust-free C10s. I don't know how you would occupy your time here!
Rust free C10's??? Such a thing cannot exist in my world!
Thanks Philip, enjoy the drags!
Watching you work make me miss fixing old junk .
Great looking roadrunner 😮 5:59
Amen, brother--those things rusted out immediately--how did that one survive?
I replaced what you did but my fire wall was in good condition 2:01
I just finished Building it, used to work with Kyle. Wanted him to see it. He's a great dude!!
love the fixing these rusty cab videos learn lots from them been watching the subscribers grow awesome thanks for the videos
Glad you like them!
Nice work! Thanks for sharing
Thanks for watching!
"Do your best and fill the rest". I need to install a patch panel on my Ranger pick up over the rear wheel well. There's only 2 things keeping me from fixing it, 1.) It's been too hot to work outside, and 2.) I'm lazy. Your video has inspired me, so I need to do something else to get over that feeling. Carry on.
Hi John! I recommend rewatching all my videos. It's a great way to procrastinate on repairs and cure insomnia!
Your kitties should get a music contract they make great fiddle and Banjo playing and you are doing a great cab repair 😄
Maybe one day!
I like your take on challenges in the shop. And your sense of humor. Thanks for putting these videos together and sharing them.
I learn slow, so I need repetition--I like seeing you do patch panels, especially when you make the panel--it makes me think I might do the same! I enjoyed your fabrication music too.
Glad you enjoyed it!
Keep at it Kyle, more nice work!
Come for the cats and surliness; stay for the welding.
It's so comforting to see that even Canadian ginger cats are natural idiots -- but with good hearts. Little fella is just doing the best he knows how. Sweet critter.
Haha he is actually a lot smarter than he looks and acts!
Well. No copyright strikes on that music. Well done, my Son
I'll never get tired of looking at those trucks. Nice work Kyle.
Thanks Randy!
The cats are right-screw body work, just carelessly toss crap about and have fun! Look out Scott-they’re coming for ya! 👏🏻👏🏻👏🏻
Meow🐈
Yeah I wish I would have listened to the cats sooner. This whole bodywork mess could have been avoided
Kyle, As always your work is second to none,keep doing what you do, even though you think it’s repetitive we always pick up something else from it. Great job!
Thanks Todd!
Told my low tire to change itself, had dinner and went to bed. Next morning was late for work, found out my tire was in a union and wouldn't work nights.
Haha I hate it when that happens!
I found you getting patch panels in place much like cats playing with bags.... Good Job!
Yes! Thank you!
I'm not sick of watching it. I'm getting ready to start on another 71 c10 that's pretty rusty. I'm getting some good ideas watching you. Keep it up.
Cool, good luck on the c10 repairs!
“Now all we gotta do is seam sealer over--“; that’s when I spit my Saturday night popcorn and pissed a lil 😂. Awesome work Kyle. Keep ‘em coming bro. Seam sealer. Haa did you move south of the Minnesota boarder. So good.
Hey sorry about the loss of popcorn. It won't happen again!
@@CarterAutoRestyling well worth it
Better to lose a little popcorn than to have popcorn welds...
Another great video. You are doing a great job on the truck. You make these repairs look easy even though they take a lot of skill. To quote Forrest Gump; "Do your best and fill the rest, That's all I have to say about that".
Forrest Gump said it best! Thanks Pete!
Ppl said the same about my 76 Jeep j10.. but i showed them. Rebuilt the entire bed floor and cross members.. It was a giant pile of rusted.. with no hope i jad to cut it entirely out and start from scratch.
has been a bit of a grind, but we now get the drill, ' you can not cut corners ' 👍 rob nz
Time to make a late evening run to a supermarket for some bases for your welding carts...or find some abandoned ones...but don't threaten the whole rack of them to get them in the truck!
I endorse this strategy. I also make engine dollys out of em too.(for easy moving engines around)
Haha I like that idea!
Tractor Gnome is the real enemy? Say it isn't so, Kyle! Hmmm...he does look pretty sketchy when I think about it.
I'm afraid it's true!
You do fantastic metal work it's nice to see real craftsmanship on a you tube channel. Ive mentioned your channel on some other channels i hope that helps your channel. Thank you
Thanks, I appreciate that!
I'm only speaking (typing) for myself when I express the following ......
Thus far, I have not been bored nor tired of watching the cutting, welding, grinding on THIS project or any other that you have shared on video.
My only regret is I dove into my 'project' before you started your channel. I can now detect some of the ways i should have went about my repairs.
My next 'project' will be more in line of what I have learned from watching your channel.
Thanks Kyle.
Thanks Russ! I hope some of this nonsense that I ramble on about will help you with your next project!
Thanks for the bonus b body clip , not that I’m an all in purest but the hot rodder must’ve souped it up a bit with the cross bracing
Yeah I got to go for a ride in it and it pulls pretty good!
It's a beast that's for sure!!!
"Do your best and fill the rest."
He admitted you were right all along? Oh I see this starting up again.
I think we should keep our tents up next to his garage just in case you need some support.
Unofficially the Carters Hair Styling war department still approves of camping out in front of his shed...but you didn't hear that from me
Shhh The walls have ears and the Interweb has spies.
Thank you! I'm really learning a lot about welding and car repair watching your videos, and the cat clips! Sadly, due to my visual impairment power tools are not my friend. So I really apprecaite your work.
Thanks! I try to make the cat clips as educational as the rest!
That’s an incredible toupee you’ve got there, Kyle.
Thanks!
Looking much better
How could we get sick of watching the metal wizard with such a nice hair piece.
I know it's obvious don't make him insecure
Who told you I wear a hair piece?! Haha
@@CarterAutoRestyling You did LOL we would still watch your show even if you had a tit on your head with one hair growing from the nipple.
Glad I watched, I had the same road runner in 1975. Mine was same color but no vinyl top and black interior. Thanks for the flashback. Earned you a subscription
That's awesome, thanks! The Roadrunner isn't mine, though. It's been owned by the same guy since the early 70s and just had a ground up rebuild finished by a local shop.
I live in a rusty state. Every five year old truck has rust somewhere. I started rust repair in the '70s on Japanese cars I flipped. Those were all handmade patches , pop riveted in with fiberglass filler over everything. Some of those cars are still around amd look pretty good! Now with the patch panels for everything this work is much more fun and easy, (well for my shop). You can get a nice car with rust pretty cheap, get one and try it out!!!
I just got back from the garage where I was telling the tail panel on my old Chevy to install itself ... it told me to go (*%$"#!!) myself ... guess you got to know how to talk to those parts ... enjoyed the video ... liked the plug weld spot ... now let the custom begin 👍👍
Try talking back next time. Let the panel know who's boss. Give them an inch and they take a mile
Good stuff Kyle! Turning swiss cheese into a solid truck. She's looking good!!
Thanks Ken, I'm hoping to have all the cab repairs done this week
Great video. Thanks for taking the time to explain the plug weld procedure.
Thanks for watching!
Well, Im no exspert but as soon as i viewed the latest installment of your, apparently, popular channel, i was struck by the fact that as soon as that wonderful old c10, back in Montana we called em pickups, the weather changed here in ND. Now could it be that the massive amount of metal used to create solid structure in said pinkup disrupted the space time continuem and caused it to be a bit brezzy in ND? Dont know fer certainly but....
Thanks for another great tutorial and as always i enjoy the humor and antics and most of all i learn something new every time i watch! Thank you! Peace out until next time!!!
Nope , not tired of watching rust repair. One of these days I'll get to fix mine. But until then I'll learn all I can. 38:57
That was some mad welding skills there. I liked your tips as they were thorough and made sense. The crazy humor helps out a lot. Glad you and Shed by the Tracks buried the hatchet in the ground and not in your heads.
Great work and video young man. I agree with you on the bondo boys. I call it dog shit, because when I repair cars that need welding to pass a ministry safety test here in the UK, bondo/dog shit/filler is a pain in the backside!
If you care to get the fit up good, you don't need much filler if any.
Keep up the good work young man and all the best for 2024!
i tried the door install on my 93 s-10, it just gave me a dirty look. thumbs up
Yeah I've heard it only works on 2nd gen s10s
First time watching your Chanel, just wanted to say that pole barn garage has you beat in the metal working. 😉😆 kidding..
nice work, good video. Subbed
Hey thanks! I agree. That pole barn guy is the best metalworker on youtube!
Carter, great sense of humor and awesome work you definitely know what you’re doing. Keep up the good work and all the videos we support you my friend.
LMAO "My only vehicle and I gotta get to work tomorrow!"
Excellent! Love watching this stuff. Any fender fixes coming up? Nice road runner!
I don't think I have any more fender fixes on this one, but there will be on the next project!
I was only thinking I should look for your plug welding video and there it is. Thanks.
Glad I could help
I was watching this again and it occured to me that I might not have left a comment. I then decided to scan the comments but there are 369 comments so I gave up looking. So I'm doing my part and commenting. Great video. Thank you for your time.
Great video. You really know what you are doing and the most calm attitude. Made everything g do fit like a glove.
Thank you!
Great job😁 like the videos, keep the videos coming with short interval.
don't skip any parts just because you've just done it on the other side, just timelapse it instead.
greetings from Norway👌
Greetings from Saskatchewan! Thanks for watching!
Your good. How can you keep from laughing. Love your videos
Thanks! Rust repair is a serious business, so laughter is prohibited in the workshop!
my garage has looked like that for the last 12 years
Bondo Is Life !
I wish I would have done that when I did my 63. I kind of just hacked it together just to make it solid and drive the truck.. Live and learn
You did what you knew how at the time when there was no RUclips.
Me and a friend had a body shop right out of high school. We were just young kid's 18, 19 year's old putting car's back together the way we knew how no training. At the end of the work the owner's were happy. Until we got older and more experienced then we started to put car's back together the right way replacing metal.
Hey at least you're driving it!
You're telling stories now. You know damn well you have a team of specialists in the back
Busted! Haha
Enjoyed the introduction. This is my first time watching your channel, and I was nearly persuaded to say, give the guy a chance...restorations can be a swamping challenge...
I forgot the question and the cryptic answer choices. Seems like not very many people would notice the amateur welding job nor the rest of the newbe metal finishing. Was that the question?! The cats are acting as though they are running out of cat nip by the way so there is that too. Looks good... weld done.
Thanks Doug!
Do your best and fill the rest. I feel the same way about wasps. I was stung by one when I was four and I'm still looking for it's relatives sixty years later.
Hope you're able to get your revenge someday!
@@CarterAutoRestyling I'm working on it!
Dude as someone that has no idea but also no choice but to weld his own floor pan in a van or wait 4 months for someone else to do it ,thanks for the advice and wish me luck. Oh should I take the gas tank out before welding above it 😂
You better pay your repair guy extra for that lawn mower.
Awesome WORK bro. Thank you for Sharing...Busy with my '76 F100...from South AFRICA
Nice 69 beeper bird!
Yeah it is!
Looks like you’re going counterclockwise for your plug welds you’re always supposed to go clockwise 😉
Never mind I just watch the video ha ha.
You have to take in account the man is left handed.
I know he is It was a joke,@@markebedwell9973
He only did it in the drawing he did not do it when he was plug, welding@@markebedwell9973
I did that for the folks watching in New Zealand and Australia
Just done the same things on our sons 66 C10 ! There/its a job, pays off in the end ! Good luck brother ! 👍✌
Right on! Thanks for watching!
Excellent job Kyle
Thanks Tom!
Im not tired of the Rust!
Well that makes one of us!
i like how you weld into seam and filing it come. i love this new machine works beats old way using stone hammer and heat. i love watching videos . true master. for newbie
Glad you like it!
Can’t wait to see your shop build and decorating ideas. Please film your trip to the antique store and tattoo shop.
Sorry, did I missed your trip to the barber video ?
I'm trying to remember to turn the camera on more often. I know how important it is for you folks to experience my daily routine
@@CarterAutoRestyling I was being sarcastic .😎
@@riverflyswatterso was I!
@@CarterAutoRestyling got me. You’re a funny guy. 😂
The real enemy.. LOL Well, united you will stand. To have his level of success on RUclips you need to include a lot of cursing, beer drinking, darts and other inhalants. 🤣😂
Love your work
I feel for your mixed emotion between making progress on the truck and supporting video content for your channel. I find that ten minutes of video takes about half an hour of filming and editing. You've mentioned in the past that the filming really slows you down. I will add that I appreciate your efforts to provide entertaining content for your channel. I always enjoy watching.. even the cats. 😊
I think it would be easier to master time travel Kyle, find that truck 40 yrs ago and bring it back to the present day--but where would be the fun (and rust) in that!😆
Probably!
You've done amazing work. I'm sorry for the rascal who bailed out on you, I hope he watched this and learned how it''s done! We are presently working on my sons '79 GMC that looks to be in the same condition as the cab you are working on, therefore, I am greatly inspired that we can fix his cab too!
as always brilliant stuff👍a bit of effort and crap turns to gold
cheers joe
Thanks Joe!
All ya need is some rivets, some license plates, and some silicone 😁
You are amazing to tackle the bad ones.keep goin!
Another classic video. Thanks. Sadly, and I'm a bit ashamed... I'm a do your best fill the rest type. But, with your tutoring, I aspire to be better. I try to imagine Bondo being life... not there yet! Although, the Bondo session you did on your common enemy's Studebaker looks pretty good!
Just wait till the bondo eventually cracks and falls out of that studebaker! Then I'll have the last laugh!