@@goldensolsanctuary not really…i believe u can't…well,since my post, i didn’t really look into it as i was using only 1 mic lol and connected to my sx900 keyboard where i can manage the effects. Only instruments on the mixer and a phantom mic for ambient.
Hey Drew Can the flow 8 be used for streaming, if yes, can you do a tutorial on that. Don't mind showing us how it can be used as an audio interface too
Hi Drew: I'm trying to figure out if there is any way to feed my mic on channel one on the Flow 8 into an Eventide H90 effects box and bring the fx signal back on separate stereo pair. I don't see a way to buss the signal from the mic channel to the input of the H90. Is there some way to do it through routing?
Wondering about feedback suppression? Sounds like there is not an auto setup but can it be done manually? My need is for a low voltage digital mixer for Wedding ceremonies that I can ring out. Low voltage means I can run it off battery power
Great video as always Drew. If input 1 is a mic and input 2 is an acoustic guitar via DI, can I have a cathedral effect on input 1 but a guitar effect on input 2 simultaneously? I currently see no way to do that. Thanks.
Hi Drew! I appreciate you posted this video. It was really helpful. I need your help now. I am trying to put a song in Spanish and English at the same time. The one in Spanish needs to go through the speakers and the one in English should go out in the interpretation device. When I move the bottom in the right of the little screen it let me hear more English or more Spanish depending on the direction I move it. Do you have an advice for me? Thanks
Thanks for the very helpful explanation. Is it possible to activate a different effect in the input channels to the mixer? for example: Guitar fx chorus, vocal fx reverb, etc.. Thanks for your availability
Great Video. Can you setup different effect for each channel, or one setting of effects applies to all channels. Please explain if possible. Thanks heaps. ❤
We use a Flow8 at our church. The help I have is timid and the workload is often too much, with a computer, two cameras, an ATEM and a Flow8. I have not attempted to add the handling of effects. I have wondered if there is a way to set them up and turn them on and off with a single button.
Hi. I play the accordion and sing. My backingtracks are played via laptop. Is it possible with this Flow 8, to use this on stage, playing the backingtrack simultaniously with my live accordion and singing?
Oh I was expecting to see setting of FX on individual inputs channels but it's not even mentioned here! The question is: Once the FXs selected, i.e Church and Delay, they will be applied to all channels then. It's not possible for instance Mic 1/2 have Church+Delay while Guitar7/8 have Chorus+..., and AuxIn 5/6 have anything else. Correct?
guess you can ignore my comment on the overview video, looks like you can have separate effects on the monitors. im definitely going to pick this guy up
Thank you for your videos. I have issues with my Behringer XENYX X1222USB Premium where the compressor drops the volume or gain by almost half and my live recordings are severely affected. Any ideas or suggestions? I have the compressor knows all the way down to zero.
Hi, I've been trying to figure out a couple of things. Does it have to be a phone or can I connect via Bluetooth to an android tablet? Also, can I connect the 'USB out' to another tablet, Ipad or other, for multitrack recording? There are apps for multitrack recording which will enable me to save each of the stems then take them home and run them through my DAW. I could get a laptop but that's an expense I'm trying to avoid. Basically, I run an open mic night at our local pub, I would like to produce good quality, or at least better quality videos and sound recordings to showcase our local talent.
Hi, I have a Behringer Flow 8 with 2 Bose S1+ Pro PA speaker and a Behringer power subwoofer. How do I hook up to the flow 8. Please advise and thank you.
Depending on what subwoofer you have from Behringer, it might have a crossover built into the sub. Take the LR out from the Flow 8, take it to your subwoofer input first, then take the output of the subwoofer to your Bose S1+ Pro input. Hope this helps!
Hallo, I want to record Vocals in direct monitoring on my DAW Cubase 12 and want to have effects only in my mix on monitor 1 and no effecst on the Main Mix. Is this possible? Thank you for help! Greetings Chris
It's probably a dumb question but could you make a video on how easy it might be to connect this to a DAW on my laptop? I have a PC and I have FL studio. I had somebody on RUclips state that a digital mixer has zero latency compared to an interface could you explain how to connect this to a DAW?
I don't think you can adjust the fx returns to the monitors indeed. Correct me if I'm wrong please, but it seems to be shared with the fx return on the mains. Real shame...this is kind of a deal breaker to me for an otherwise very handy compact mixer for small events...
This video is so helpful! Thank you! One question: what would be a good way to create a vocal double (aka John Lennon or Beatle type lead vocal)? Anyone?? Thx!!!
Hey Drew, I noticed a flaw with the software. (Bug) When you save a config, restart and reload the config, monitor 2 headset is at 0. Do you have the same symptom?
Received my Flow today.. I actually bought this because of the Parametric EQ update.. Love Behringer FX on the Xair.. but found the Stereo delays (Ping Pong) to be very disappointing. No feedback setting??? Please add this.. this is really insurmountable. Also I noticed some phone disturbings, hearing small clicks every now and then.. Can't put my phone on top of it.. :-(
Best microphone and effects settings for picking up drums while the drummer sings? I noticed long ago that an engineer hooked up a lead singer/drummer with a microphone that picked up his drums very well from his vocal mic.
Very well explained! Thnx!
Very helpful videos. Thank you so much for putting these together. You've certainly accelerated my learning curve. Much appreciated.
Thank you Drew, great video.
Hi there…Is it possible to have different effect for each channel? Especially if having two singers singing at the same time…thank you
Did you ever figure this out? I'm struggling with this as well. Just wanting effects on one mic not al
@@goldensolsanctuary not really…i believe u can't…well,since my post, i didn’t really look into it as i was using only 1 mic lol and connected to my sx900 keyboard where i can manage the effects. Only instruments on the mixer and a phantom mic for ambient.
Hey Drew
Can the flow 8 be used for streaming, if yes, can you do a tutorial on that. Don't mind showing us how it can be used as an audio interface too
Hi Drew: I'm trying to figure out if there is any way to feed my mic on channel one on the Flow 8 into an Eventide H90 effects box and bring the fx signal back on separate stereo pair. I don't see a way to buss the signal from the mic channel to the input of the H90. Is there some way to do it through routing?
This video has been helpful. Thank you ❤
Glad it was helpful!
Спасибо большое тебе, добрый и умный человек! Я буду учиться пользоваться этим прибором, благодаря тебе!
Wondering about feedback suppression? Sounds like there is not an auto setup but can it be done manually? My need is for a low voltage digital mixer for Wedding ceremonies that I can ring out. Low voltage means I can run it off battery power
it's possible to combinate two effect?
How do you adjust the amount of fx in the monitor
Great video as always Drew. If input 1 is a mic and input 2 is an acoustic guitar via DI, can I have a cathedral effect on input 1 but a guitar effect on input 2 simultaneously? I currently see no way to do that. Thanks.
Hi Drew! I appreciate you posted this video. It was really helpful. I need your help now. I am trying to put a song in Spanish and English at the same time.
The one in Spanish needs to go through the speakers and the one in English should go out in the interpretation device.
When I move the bottom in the right of the little screen it let me hear more English or more Spanish depending on the direction I move it.
Do you have an advice for me? Thanks
Thanks for the very helpful explanation. Is it possible to activate a different effect in the input channels to the mixer? for example: Guitar fx chorus, vocal fx reverb, etc.. Thanks for your availability
Great Video.
Can you setup different effect for each channel, or one setting of effects applies to all channels. Please explain if possible. Thanks heaps. ❤
The effect is one/two effects for all of the channels, and then you can vary the volume of the channels going to that effect.
@@DrewBrashler sir i really appreciate coz Ur Vdos Is Very Help full...! Can u plz tell me where is Stereo ping-pong feedback setting?
Can the tempo also be detected by the beat that comes from one of the channels?
Hi Drew. How do you connect or setup a karaoke playet into flow 8? How do you setup it's gain using easy gain?
We use a Flow8 at our church. The help I have is timid and the workload is often too much, with a computer, two cameras, an ATEM and a Flow8. I have not attempted to add the handling of effects. I have wondered if there is a way to set them up and turn them on and off with a single button.
Which one would you recommend and it's better than the other, behringer flow 8 vs zoom livetrak L-8
are there already many vocal chain presets?
Hi. I play the accordion and sing. My backingtracks are played via laptop.
Is it possible with this Flow 8, to use this on stage, playing the backingtrack simultaniously with my live accordion and singing?
Very nice.. Thanks
👍👍👍 I like concert effect as well. Do you know how to emulate this effect on X32?
Oh I was expecting to see setting of FX on individual inputs channels but it's not even mentioned here! The question is: Once the FXs selected, i.e Church and Delay, they will be applied to all channels then. It's not possible for instance Mic 1/2 have Church+Delay while Guitar7/8 have Chorus+..., and AuxIn 5/6 have anything else. Correct?
What's the difference between Echo and Delay on the Flow 8? I hear some small difference, but not enough to warrant calling them separate effects.
Hi I want to know how to setup EQ and reverb vocal microphone on flow 8
guess you can ignore my comment on the overview video, looks like you can have separate effects on the monitors. im definitely going to pick this guy up
Thank you for your videos. I have issues with my Behringer XENYX X1222USB Premium where the compressor drops the volume or gain by almost half and my live recordings are severely affected. Any ideas or suggestions? I have the compressor knows all the way down to zero.
Hi, I've been trying to figure out a couple of things. Does it have to be a phone or can I connect via Bluetooth to an android tablet? Also, can I connect the 'USB out' to another tablet, Ipad or other, for multitrack recording? There are apps for multitrack recording which will enable me to save each of the stems then take them home and run them through my DAW. I could get a laptop but that's an expense I'm trying to avoid. Basically, I run an open mic night at our local pub, I would like to produce good quality, or at least better quality videos and sound recordings to showcase our local talent.
Is there an FX Send? I want the ability to loopback a fx pedal to an input. If that makes sense. A typical setup for dub music.
Hi,
I have a Behringer Flow 8 with 2 Bose S1+ Pro PA speaker and a Behringer power subwoofer. How do I hook up to the flow 8. Please advise and thank you.
Depending on what subwoofer you have from Behringer, it might have a crossover built into the sub. Take the LR out from the Flow 8, take it to your subwoofer input first, then take the output of the subwoofer to your Bose S1+ Pro input.
Hope this helps!
Better than Zoom Livetrack L8?
Hallo, I want to record Vocals in direct monitoring on my DAW Cubase 12 and want to have effects only in my mix on monitor 1 and no effecst on the Main Mix. Is this possible? Thank you for help! Greetings Chris
Sir where is ping pong Feedback Setting in flow 8
Plz tell me ?
It's probably a dumb question but could you make a video on how easy it might be to connect this to a DAW on my laptop? I have a PC and I have FL studio. I had somebody on RUclips state that a digital mixer has zero latency compared to an interface could you explain how to connect this to a DAW?
hello, built an user layer that it will be a great update
Thanks for the vid. Please tell me you can control the fx level to the monitor?!! I don’t think you can. 😩
I don't think you can adjust the fx returns to the monitors indeed. Correct me if I'm wrong please, but it seems to be shared with the fx return on the mains.
Real shame...this is kind of a deal breaker to me for an otherwise very handy compact mixer for small events...
@@oootinanai I've just seen this reply, thanks for confirming. Tis a shame.
This video is so helpful! Thank you! One question: what would be a good way to create a vocal double (aka John Lennon or Beatle type lead vocal)? Anyone?? Thx!!!
Hey Drew, I noticed a flaw with the software. (Bug) When you save a config, restart and reload the config, monitor 2 headset is at 0.
Do you have the same symptom?
Received my Flow today.. I actually bought this because of the Parametric EQ update.. Love Behringer FX on the Xair.. but found the Stereo delays (Ping Pong) to be very disappointing. No feedback setting??? Please add this.. this is really insurmountable. Also I noticed some phone disturbings, hearing small clicks every now and then.. Can't put my phone on top of it.. :-(
Can u plz tell me is it available feedback setting stereo ping-pong?
@@Fahadshah-nd1pv At the time I tested this, it was not available.. I don't use it anymore.. So, I don't know..
@@MacGyverGear sir I'm also very disappointed ☹️ ! Plz give me any type of tip how to increase pingpong feedback ?
Give one option to Mute Fx 1 Or Fx 2 on Mobile
Best microphone and effects settings for picking up drums while the drummer sings?
I noticed long ago that an engineer hooked up a lead singer/drummer with a microphone that picked up his drums very well from his vocal mic.
Can I have somehow apply High-pass and Low-pass filters for effects? Or maybe send effects to some channel, and that apply EQ to them?
Faiders without cover... This is a big problem for flow 8.