Al lavar un vehículo con métodos convencionales, primero se aplica jabón, se lava con una esponja o escoba y luego se enjuaga con agua de arriba a abajo. El lavado sin contacto es un poco diferente. El jabón se aplica a través de un espumador de alta presión y luego se usa agua a alta presión como una “esponja o escoba”. El agua se vuelve a transformar en jabón fresco, ya sea de abajo hacia arriba o hacia atrás en el caso de camiones y remolques, etc. De esta manera, el jabón se usa de manera más eficiente. (Si se lava de arriba hacia abajo, simplemente lavaría el jabón del vehículo, lo que anula el propósito). Luego enjuague de arriba hacia abajo para finalizar el proceso de limpieza.
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom. Touchless washing is a bit different. Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose). Then rinse from the top down to finish the cleaning process.
your pressure washer was struggling to keep staying on the note c flat it needs more energy help him get more energy don't let him struggle to keep that pitch c flat because i want him not to struggle no more some pressure washers don't have a hard time keeping the pitch but other than that good job helping him clean that toyota
Hey Jack, it really depends what your using it for, we use 21lpm at 3000psi which is really good for wash bays and cleaning big gear, for cars 10lpm at 1800psi would work fine
It's amazing to see the difference with a dirty vehicle to when you clean it!!!
••• Disculpen mi falta de ignorancia, una vez que le hechas la espuma ¿.hay que tallar la lamina o enjuagar ya.?
Al lavar un vehículo con métodos convencionales, primero se aplica jabón, se lava con una esponja o escoba y luego se enjuaga con agua de arriba a abajo.
El lavado sin contacto es un poco diferente.
El jabón se aplica a través de un espumador de alta presión y luego se usa agua a alta presión como una “esponja o escoba”. El agua se vuelve a transformar en jabón fresco, ya sea de abajo hacia arriba o hacia atrás en el caso de camiones y remolques, etc. De esta manera, el jabón se usa de manera más eficiente. (Si se lava de arriba hacia abajo, simplemente lavaría el jabón del vehículo, lo que anula el propósito).
Luego enjuague de arriba hacia abajo para finalizar el proceso de limpieza.
What is the pressure from the gun?
👍👍👍👍👍
What is it with rinsing from bottom to top
When washing a vehicle using conventional methods you firstly apply soap, wash using a sponge or a broom and then rinse off with water from the top to the bottom.
Touchless washing is a bit different.
Soap is applied through a high pressure foamer and then high pressure water is used as a “sponge or a broom". The water is worked back into fresh soap, either from the bottom to the top or backwards in the case of trucks and trailers etc. In this way, the soap is used more efficiently. (If you wash from the top down, you would simply wash the soap off the vehicle which defeats the purpose).
Then rinse from the top down to finish the cleaning process.
@@chiefsaustralia9012 ok I understand that.
Nice
your pressure washer was struggling to keep staying on the note c flat it needs more energy help him get more energy don't let him struggle to keep that pitch c flat because i want him not to struggle no more some pressure washers don't have a hard time keeping the pitch but other than that good job helping him clean that toyota
Gday Cheifs, what pressure washer do you recommend?
We use a 21lpm 3000psi but it really depends what your using it for
Hey Jack, it really depends what your using it for, we use 21lpm at 3000psi which is really good for wash bays and cleaning big gear, for cars 10lpm at 1800psi would work fine
What is the name of the touchless shampoo you are using, where can one find it. Thank you
Rince from top down. Not this way!
No quedo bien lavada los guardabarros.. Hay q darle con cepillo... Y restregar
Es solo una demostración de producto
@@chiefsaustralia9012 uste fabrica eso producto
Gracias
@@chiefsaustralia9012 me interesa saber si usted fabrica ese produto
Adres, akada
not sure what you mean
BMW540.740 add bkan
Dislike👎
no worries