After driving with them on my truck for the last 5 months, I can say that difference between these headlights and the stock headlights is night and day. Sure, they're NOT cheap, but they are well worth the money
Just finished up install on my 2011 Pro 4X. Night and day difference between stock and these lights. Other have already noted that newer models have a single piece front bumper which changes install a little bit. The Pro 4X models come with a small front skid plate which will require you to climb under the truck to detach from the front bumper. Mine was 6 10mm bolts and 4 screws which removed the first part to give access to where the bumper connects to the skip plate with 4 10mm bolts. Way more of a pain as the truck has just enough clearance to get underneath, but not enough to be comfortable. I also had to trim the corner of the fuse box a bit to get the new daytime running light cable out of the box with it closed. Wouldn't close and pinched the cable really bad without any adjustments, but some snips fixed that issue. The LED fog lights that came my order didn't fit, wrong mounting bracket (they didn't have any mounting bracket and the stock ones couldn't be retrofitted onto them). Really disappointed there as I'll need to take it all apart again to install the correct ones, which I doubt I'll do since it was more of a pain to get access than anticipated. Overall, the lights are great, but this video is a bit dated with my install method (and more intensive).
I just installed a etc on my 18sv. 1 piece bumper, but you do jot need to remove the bumper. Just remove your grill. The 3 pins for the bumper that are under the grill, then pull the fender liner loose and remove the 2 10mm bolts that holdvthe edge of the bumper to the fender. The bumper is flexible enough to just move it out of the way to get at the side bolt, pull the old and reinstsll the new headlight.
My 2011 Nissan Frontier finally received its first pair of LED's by Sealight. Amazing transformation from OEM Halogen to brightness. These are really nice though, but surely above my price range
I don't think this was mentioned in the video, but be sure you properly level your headlights after installing new ones so that you don't blind other drivers.
great video!!! finally for my '18, i book marked the site saving up that upgrade also, project to my truck lift, brush guard, and those LED , happy to find this and DRL's that is also awesome to!
Love mine on my PRO-4X and it looks sick with the Midnight Edition grill on my white truck. I get lots of compliments and people have asked me if my truck is a newer model or trim level. The difference in light is night and day and I adore the day time running lights which are very bright. I have serious night blindness which is why I wanted these LED upgrades from a reputable manufacturer like Morimoto which solves the problem. Adjusting the lights took me about a week to get them where I like it without blinding other drivers or having them too low. Also got a great deal on Black Friday from Headlight Revolution!
Perhaps an installation video on a newer model would be in order since the 2009 shown has an actual bumper and an upper bumper cover. Later years such as my 2017 has a 1 piece bumper cover that runs all the way down to the air dam. Love the way these look. Don't know that I'm interested in taking the whole front of my truck off to put them on.
That is the point of the Hybrid series light from Morimoto, more budget friendly lights that reuse the OEM turn signal. This can be upgraded to an LED bulb!
That is for the install video! I got mine in the other day and installed them. I have the 2020 frontier midnight edition. The fuse box is different on the 2020 year, do you know which fuse to use on mine? I’ve tried multiple however they either don’t turn off or the headlights don’t turn on. Thanks!
Very fair price is relative. Unfortunately the cost is to high for me also. I will have to wait for a competitor or your price to come down. It is just like tv’s when it is new a 65” cost 5 grand, now you can get one that is even better quality for under a grand. So that being said I gonna wait..
Is there any headlight similar in what looks like a no brained upgrade for the 2005-2008 models. I have a 2007 and would definitely buy something like this headlights.
Could you please make a video about the suspension that Nissan frontier has. I fell in love with the truck in the video. I want my truck to look just like that. Thank you.
If you have them aimed properly, they shouldn't be at all. If you are not aware, we have a video on just that topic here: ruclips.net/video/OIow5YgdRro/видео.html
Nothing like these available at this time for that year model, we do have some plug and play LED bulbs though that you could try out! Reach out so we can assist you! 218-755-5200 Sales@HeadlightRevolution.com
This video is incorrect. Their are 2 more screws they didn't show and the bumper does not pull apart that easy. These headlights are over $800.00 Better just buying Fahren leds
They do not come in RHD configuration sadly, but we can help you see if they will fit! It does appear that they will work. Send us an email! Sales@HeadlightRevolution.com
After driving with them on my truck for the last 5 months, I can say that difference between these headlights and the stock headlights is night and day. Sure, they're NOT cheap, but they are well worth the money
Finally, I will take a look again when they are actually in stock 👍
Sounds great! reach out if you have any questions!
sales@HeadlightRevolution.com
@@HeadlightRevolution
Will these fit the 2021 model? It’s the exact same vehicle as the 2020 Frontiers.
Just finished up install on my 2011 Pro 4X. Night and day difference between stock and these lights. Other have already noted that newer models have a single piece front bumper which changes install a little bit. The Pro 4X models come with a small front skid plate which will require you to climb under the truck to detach from the front bumper. Mine was 6 10mm bolts and 4 screws which removed the first part to give access to where the bumper connects to the skip plate with 4 10mm bolts. Way more of a pain as the truck has just enough clearance to get underneath, but not enough to be comfortable. I also had to trim the corner of the fuse box a bit to get the new daytime running light cable out of the box with it closed. Wouldn't close and pinched the cable really bad without any adjustments, but some snips fixed that issue. The LED fog lights that came my order didn't fit, wrong mounting bracket (they didn't have any mounting bracket and the stock ones couldn't be retrofitted onto them). Really disappointed there as I'll need to take it all apart again to install the correct ones, which I doubt I'll do since it was more of a pain to get access than anticipated. Overall, the lights are great, but this video is a bit dated with my install method (and more intensive).
Thanks for the review, Steen!
I just installed a etc on my 18sv. 1 piece bumper, but you do jot need to remove the bumper. Just remove your grill. The 3 pins for the bumper that are under the grill, then pull the fender liner loose and remove the 2 10mm bolts that holdvthe edge of the bumper to the fender. The bumper is flexible enough to just move it out of the way to get at the side bolt, pull the old and reinstsll the new headlight.
I currently own a Nissan Pro4X.
I did this exact thing.
I also put new led reverse lights too
Well worth the effort.
So can’t wait to order a set and slap em on my frontier!
Feel free to use my promo code "BRIGHTWINNER" to get a free set of T10 LEDs and chance to win some other cool prizes before you buy!
Let's do it!
How is it
Same
My 2011 Nissan Frontier finally received its first pair of LED's by Sealight. Amazing transformation from OEM Halogen to brightness.
These are really nice though, but surely above my price range
Wish these fit my 08! I'd buy them in a heartbeat with a matching set of tail lights.
I also have an 08, any idea why they won’t fit?
@@jasontaylor5566 I'm pressure it's the mounting tabs that are different.
I don't think this was mentioned in the video, but be sure you properly level your headlights after installing new ones so that you don't blind other drivers.
Always gotta check aiming after installing new headlights or new bulbs, great tip!
great video!!! finally for my '18, i book marked the site saving up that upgrade also, project to my truck lift, brush guard, and those LED , happy to find this and DRL's that is also awesome to!
Mine are great. The daytime driving lights are even bright.
Thanks for letting us know you love them, Howard!
Love mine on my PRO-4X and it looks sick with the Midnight Edition grill on my white truck. I get lots of compliments and people have asked me if my truck is a newer model or trim level. The difference in light is night and day and I adore the day time running lights which are very bright. I have serious night blindness which is why I wanted these LED upgrades from a reputable manufacturer like Morimoto which solves the problem. Adjusting the lights took me about a week to get them where I like it without blinding other drivers or having them too low. Also got a great deal on Black Friday from Headlight Revolution!
💪💪💪
@@HeadlightRevolution If you guys want some photos for your website let me know! Happy to send you some!
Great video! I saw these previously and I'm sold after watching this. Hoping for quick shipping!
Let us know how you like them!
Excited to get mine in and get them on the truck
Make sure to post pix on Instagram or Facebook when you have them on!
What’s the reason these aren’t compatible with pre-2009 Frontiers? Any workaround?
Perhaps an installation video on a newer model would be in order since the 2009 shown has an actual bumper and an upper bumper cover. Later years such as my 2017 has a 1 piece bumper cover that runs all the way down to the air dam. Love the way these look. Don't know that I'm interested in taking the whole front of my truck off to put them on.
You don't need to. You can finesse the bumper by taking the two bolts under the fender out and reach your hand in to remove the hidden bolt
I think you guys are missing a trick here. If you manufactured these in RHD configuration you would blow open the European market too!
For the price they should come with built in LED turn signals. High tech headlamps with old tech turns is a bit silly.
That is the point of the Hybrid series light from Morimoto, more budget friendly lights that reuse the OEM turn signal. This can be upgraded to an LED bulb!
Just curious. If they would fit an 2008 d40 spain?
what bull bar an LED bar is that? at the end of the video?
Phewwww $975?? Holy crap!
You really get what you pay for! The best performing headlights on the marketing for the Frontier 👌🏻
Would it work on the d40 navara
Is your Nissan lifted ? What size are your tires? I love it!
So cool,
Do you have for Nissan Navara D40 2014?
Very nice headlights.... 1 problem my frontier is an 06. Do you make a headlight for my year frontier?
We don't sorry!
That is for the install video! I got mine in the other day and installed them. I have the 2020 frontier midnight edition. The fuse box is different on the 2020 year, do you know which fuse to use on mine? I’ve tried multiple however they either don’t turn off or the headlights don’t turn on. Thanks!
Reach out to our CS team so we can help you out with this!
218-755-5200
Sales@HeadlightRevolution.com
I have the same question i have a 2020 frontier sv
Do you guys have the link for the specific LED turn signal that was featured in this video?
Here you go.
www.headlightrevolution.com/7440-7443-gtr-lighting-carbide-bulbs-LED.BUL.7443.CAR2_2?quantity=1
I have a Canadian Spec 2017 Frontier, it already has mandatory Daytime Running Lights, is the wiring procedure any different?
It is not! Still the same steps!
Can we get a comparison to modern OEM LED setup? Just curious what the new 2022 Frontier factory LED’s produce.
these are nice but the price is too high gotta be closer to the 400 range
Lol, you could barely do a cheap retro for 400, the price of these are on point.
This price is VERY fair for the performance, warranty, and quality you're getting!
Very fair price is relative. Unfortunately the cost is to high for me also. I will have to wait for a competitor or your price to come down. It is just like tv’s when it is new a 65” cost 5 grand, now you can get one that is even better quality for under a grand. So that being said I gonna wait..
I bought these and they are well worth the price!
975 dollars. No thank you
Do you have the full XB headlights with the LED sequential turn signals available for purchase?
We do not, sorry!
I have a 2018 S model that does not have a daytime running lights. Do I need to install a separate switch? If I do, where do I tap? Thank you.
This taps into the fuse box! (:
Will they fit my 2008 pathfinder ? They look the same
We have a truck dat looks like dat but it's called the Navara and it's RHD I wonder if it will work for dat too or it's matching year pathfinder
It would be awesome if they do fit!
@@HeadlightRevolution so true but I don't own one so I can find out
Can you option the DRL to be amber like the Moriomoto XBs on the Tacoma??
Not at this time, white only!
Would these headlights fit my 2009 pathfinder?
Off the subject, but what lift kit is on that truck?
Do you think that will fix in a 2005 Nissan Frontier ?
They will not.
Is that bumper stock??? Cause mine doesn't come apart like that in 2 pieces🧐
You must have a newer model, the older gens are two piece
Is there any headlight similar in what looks like a no brained upgrade for the 2005-2008 models. I have a 2007 and would definitely buy something like this headlights.
I'm unsure. Sorry!
Will this fit a 2009 Suzuki Equator? Very curious would love to purchase if the fitment is right
They will not fit.
Does this fit a navara d40 2013, v6 ?
Nice looking set for sure 😊
What about an 06? Are they made for this year?
They are not, sorry!
Will these fit for the 2021 models as well?
The truck is still exactly the same other then the drive train so yes it will.
It sure will!
Will they fit on a 07 Pathfinder??? Pathfinder Frontier I’ve owned them both ??
Morimoto might be working on something
Now do the Nissan TITAN!
we've heard Morimoto may be working on some. Stay tuned!
I have RHD uk spsc king cab can it fit
Ugh… i want these but goddamn $1,000+ for headlights that seems a bit steep.
With a 5 year warranty, a super modern look, and the best performance/quality on the market these are worth every penny!
Wish they made these for a 2005
Maybe one day, never know what Morimoto has in the bag!
do you have a nissan pathfinder R51 Head light?
We don't have a full headlight replacement, but we do have some bulbs you could upgrade in that headlight!
Whats the size of the light bar? Link?
Not sure man, this truck belongs to our friends at Z1 Offroad!
Could you please make a video about the suspension that Nissan frontier has. I fell in love with the truck in the video. I want my truck to look just like that. Thank you.
This was a customer vehicle. No idea what suspension he was running. Sorry!
Can these work on navara too
Sooo...the question is how much are people in the on coming traffic going to flash you thinking you're driving with your brights on?
If aimed properly, not at all.
Quite often! Usually the ones that flash me have the same type of lights, blinding me!
Are they legal in texas?
Hello fellas. ! Can you guys do. A review on the 07-14 Yukon headlights from morimoto?
We have! 😊
@@HeadlightRevolution already rocking and rolling they are a great. Product!!!!
Does anyone know if they can be installed on the European variant, the Navara?
It will probably fit, but you may need RHD projectors depending on which country you're in
Would need RHD!
Why don’t these fit 06-08?
there was a small facelift in 09. the grille and headlight shape is a little different.
Only 09+!
Too bad these headlights aren't available for 2006 Frontiers the styling is pretty much the same with a few cosmetic changes
But how annoying are they to oncoming traffic?
If you have them aimed properly, they shouldn't be at all. If you are not aware, we have a video on just that topic here: ruclips.net/video/OIow5YgdRro/видео.html
Please make these for a 2008-2012 Pathfinder
Maybe one day!
Are y’all going to have a 4th of July sale by any chance
You'll have to wait and see ;) keep an eye out on our promo page here: www.headlightrevolution.com/promotions
Is there a matching taillight ?
Not at this time, sorry!
will these fit 08 nissan pathfinder?!!
As long as they are the same headlight.
Hows the wiring quality?
Similar to OEM.
Any options for r51 pathfinder
Not with full assemblies at this time, I'm sure we have bulbs that could work though!
How long will the led last
These are expected to last the lifetime of the vehicle!
Will these fit 2011 r51 pathfinder?
They will not! Sorry!
That's disappointing. Thanks for the reply. There's only 2 I seem to find for the r51. And I don't like either. Man these are sweet though
These won’t fit a 2005?
Nope, sorry! :(
Hi how do I get one.
You can find them here: www.headlightrevolution.com/morimoto-xb-hybrid-headlights-09-20-frontier?quantity=1
Do this work on 2021?
They do!
will this fit 2008 nissan pathfinder
As long as the headlights are the same it will fit!
i ask because the ones that fit 07 won’t. there was a slight face lift. could you find out please. thank you!!
I would like to order
I need for 2003 frontier please
Nothing like these available at this time for that year model, we do have some plug and play LED bulbs though that you could try out! Reach out so we can assist you!
218-755-5200
Sales@HeadlightRevolution.com
This video is incorrect. Their are 2 more screws they didn't show and the bumper does not pull apart that easy. These headlights are over $800.00 Better just buying Fahren leds
It depends on what year your Frontier is. Some have more to take off than older ones.
I beg you send me these headlights I have a 2008 model nissan navara please pleaseeeeeeeeeeeeeeeeeeeeeeeee
You can purchase a set here!
www.headlightrevolution.com/morimoto-xb-hybrid-headlights-09-20-frontier
Nissan xterra next?
Guess we'll have to wait and see 👀
Look Nice but to expensive
The best products come at a price! Keep an eye out for a sale!
Wish they made some for the xterra.
Morimoto has a lot of products lined up. Stay tuned.
@@HeadlightRevolution will do! 👍
Do these fit in Spanish built 2006 d40 Navara? And do they come in RHD configuration?
They do not come in RHD configuration sadly, but we can help you see if they will fit! It does appear that they will work.
Send us an email!
Sales@HeadlightRevolution.com
this headlight work for a Pathfinder R51 2010?
We have only confirmed fitment for the 09-20 Frontier.
Will these work on 2006 pathfinder?
Probably not. 2005 to 2009 had a different headlights so I would say no.
It would not. We do have plug and play options though!
www.headlightrevolution.com/buyer-guide-by-vehicle/2006+Nissan+Pathfinder
does it work on the 2005-2012 nissan pathfinder?
Only fits 09-20 models.
@@HeadlightRevolution got it, thank you
Would this fit a 15 xterra?
We have not tested this yet!