Это видео недоступно.
Сожалеем об этом.
BLACK+DECKER Pressure Washer | BXPW1600E (BW16) Review | Assembly + Demo
HTML-код
- Опубликовано: 11 июл 2021
- Black+Decker Pressure Washer assembly, setup and demo.
#blackanddecker #blackdecker #pressurewasher #review
Reviewed after using for an year
Product on Amazon : www.amazon.in/BLACK-DECKER-16...
BLACK+DECKER BW16 1600Watt 125 Bar, 420 L/hr Flow Rate Pressure Washer for Car wash and Home use
Chapters:
0:00 Intro
01:01 Familiarizing components & Setup
11:20 Final look
12:11 Working demo
finalmente un video davvero utile!
Very good presentation. Lucid and clear. Well done
Very good thank you
Thanks for sharing. You just saved me ☺️
Nice one! Also good presentation brother👏
Thanks from Croatia!
Hvala. 👍👍👍
Good one😍
Good one👌
👍🏼
Can we use it with regular 240v supply or do we need a higher ampere extension
Higher ampere is recommended
Normal 5A 240V won't help for longer use. Go for 16A. That's better
Hi, i got the same one, when you connect the gun is it still turning? feels like it cant be connected fully? Its still turning
Yes it is a drawback of the design, but it requires immense attention while using, if the extension turns and reaches the unlock position, it may cause severe damage by getting the extension thrown out.
Tip: make sure you hold the gun at the joining position of the extension and the gun, as it helps to confirm it doesn't rotate freely while being used.
✌
Zen ⚡
😍✌🏼
Is It Still Working? Just asking....very interested to buy!
Yes it still works like a charm !!!
@@sachincrichu6138 thanks bro🤩 I'll surely buy it!
How to connect shampoo dispenser to the gun?
It's the same way how the extension is being attached to the gun.
Bro foam varan ulle extension evdebkittum(lance)
Amazon IL universal Lance und, athu suit aakum
Bro link idamo. Normal Lance ithinu suit aavillallo
the gun and the extender part is a bit wobbly/shaking, do you experience the same?
Is there any irregular water pressure observed, while using the washer ?
@@techiehornbills4006 no, nothing irregular. Just a bit wobbly thats all
@@saia8887 ok then it seems normal to me, do take care of the gun while using. Sometimes it may throw the extension, when not set properly in the lock position.
Pressure is coming irregular...how to solve this problem
There could be some pressure leak
Either inside the machine or could be due to some minute breaks in the passage.
It's better to get it serviced.
I cant take the extension !! Can you help me
Just try these steps :
1. Make sure the washer is turned off and unplugged.
2. Release the pressure trapped inside the machine by pressing the trigger. (If it was being used)
3. Try to join the arrow marks by pushing both the peices (the extension and the gun) towards the center and also rotate them while pushing.
4. Try pulling after each rotation.
5. Repeat steps 4 & 5 until you succeed.
ഗന്നിലുള്ള വാഷർപൊട്ടിപൊയി എവിടെനിന്ന് കിട്ടും
Brother!
Nalla video. Enniku oru cheriye samshyam. I bought the exact same. How much did you pay?
When we fit the extender to the gun and it gets locked, my extender still rotates a bit, to a certain limit. Is it the same with yours or should I ask for a replacement?
Pls reply soon.
Hey Thanks Bro
I bought it last year 2020 and that too during the Great Indian Festival sale from Amazon
For about 6700/- after all the offers and coupons.
That time the selling price was 9800/-
It's normal that it rotates a bit. The worst thing is that sometimes when we use the gun while unknowingly turning the extension a bit, it may be thrown out of the gun and may cause serious damage.😑
So always check for the arrow marks, before triggering the gun. ☝🏼
Wheel enganeyaanu bro remove akkunnathu?
Athu once attach cheyythaal pinne remove cheyyan pattilla. Some kind of lock mechanism.
Bro ithinu pattuna hose undo?
Aethu hose venelum use cheyyaam
Athinte back IL varunna connector nu pattiya hose medicha mathi
Kaal inch hose aanu njan use cheyyane,
Athu heat cheyythaanu aanu ketiye.
Aa lock jam aayath enganeya release cheyya ? Machine side il
Wheel inte lock aano ? Oru vattam accidentally athu pull aayappo oori vannu.
Gun ilekk connect cheyyunna pipe nte machine side il ulla lock .. ath jam aaya release cheyyne engneya.. njn athond dissemble cheyyarilla
How to remove that gun part again?
For removing the extender you have press it down, with force and twist it either ways to rotate and release the lock.
@@techiehornbills4006 it became more tight it's not coming
Ok, It could be due to either accumulated pressure or any rust or dirt in the joint.
Just try to release the complete pressure by pressing the trigger on the gun and
Then try to do as per my previous comment.
Still you are facing this issue then something is blocking the joint, at that point also use something soft to gently tap on outer side of the gun where the extender is connected to, and try again.
Price?? plz
Bro ippolum nallapole work akunnumdo
Yes Bro
Ippolum set aanu. No issues till now
Induction motor or carbon motor..?
It's induction motor
Sanam ippo egane und ?
Superb.. njan use cheyyunnatha..Nalla pressure undu
Njan 1.5 Years aayi use cheyyunnu. Worth aanu
ماصناعتها
snow wash is not performing and not water seft priming
Do check for any blocks in the filter.
For snow wash doesn't give much foam, we have to buy a seperate foam Lance for foam washes.
English please