Tormach Garage Series, Cutting First Part - Part 8

In the last of our garage series videos, Jeremiah Daws walks you through the last steps to cutting your first part. In the previous videos he explained all the steps to get here. In part 8 he starts by going through the conversational screens to setup your parts. You will need to pause this video to get the correct information onto each of your profile, pocket and drill/tap pages.
Since this is your first part, he explains how to use the max velocity, and the feeds & speeds sliders. If you set the velocity and feed slider to zero, then start the program, the machine won't move. You can then raise the sliders to slowly start the program. This way you can check the progress on your first cut. You can press the Feed Hold button to pause the progress. Once you are sure everything looks great you can raise the sliders to 100%.
After your program has finished cutting the part, use a micrometer to check the measurements. If they look good the part can be removed.
You can use a CAM program instead of conversational to create the same part and then load it onto PathPilot.
Check out Jeremiah Daw's RUclips channel and make sure to subscribe: www.youtube.co...
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlass...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0