Just completed the break-in period and so far the unit is operating perfectly ruclips.net/user/postUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y . I was amazed by just how quiet this little guy is. I kept having to walk down the driveway to the generator to make sure it was still running. In fact, the most annoying noise coming from the set-up is a high-pitched chirping coming from the pressure regulator on the propane line. I suppose it's possible my other propane-powered generator's pressure regulator is making the same noise, but the generator itself is so loud I've never noticed it. Build quality so far is excellent. My only nit is the service panel is a little tricky to remove. I feel like I might break off one of the plastic tabs when bending it back. I probably just need to work out the technique, so will not hold it against Champion.Next week I intend to fully load the unit to charge a large battery pack and will update this review if there's any problem (3000W continuous load vs a rated 3100W capacity while using propane). Absent any trouble there, I'm 100% pleased with this purchase.
My experience is within a certain price range all these Chinese machines use many of the same components and have essentially the same performance. The difference mainly being different bells and whistles that different users may prefer. I had a Miller Sidekick for 30 years and it worked as good when I sold it as it did when new. It had to go because it was heavy. I've used both the YesWelder 205DS versions. These welders perform as good as the Sidekick with more capability and more fine tuning adjustment if you prefer. Or use the Synergic function that I've found to be pretty spot on as I weld different thicknesses when doing a single project. Adjust amperage and to the wire speed close of very close to spot on.
Pretty sure the Stahlwerk Machine is manufactured in Germany and has been in business for nearly 25 years, or at least according to they information available on the their website... do you know of anyone having experiences with this company?
For sure it is like this! This welding business is a wholesale business and you get what you ordered. Here in GER e.g. is a seller who always goes for bigger negative clamps ans cables. BUT: There can be also a difference in software/firmware. And this can make a HUGE difference w/o a difference in manufacturer costs.
"Pretty sure the Stahlwerk Machine is manufactured in Germany " NO it is not! It is "designed in GER" - which just = to I want to order those welder in white color. This business is just 15km from my parents home town - they do just sales amd MKT over there. But they do very good MKT, as we can see on your comment. btw: I own a CT250 (or so). Wanted to start TIG, but gave up and thought I am too dumb. So I bought a PL MIG/MAG one. 1 year later I tried a TIG mashine from a friend and that worked nicely. Also the plasma cutter worked badly / hardly. On WIG vs. 3mm steel there was no welding under 160A (on 240V) So we can assume: DOA (=dead on arrival) These have 5 year warrenty to I have 3 left to bring it back. 2-times Plasma, 8 times WIG, 12 times MMA - 2 years in the shed. My 2ct.@@CoryHubbard
You should be talking and giving us the information about the machines and their settings, plus your observations as a welder on which you think is the best/ any down falls/ problems you experienced? This really shows us nothing other than they work in experienced hands.
I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.
I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.
Hi, danke für das Video. Bin Neuling, würdest du die hitbox als Neuling wählen, weil da schon alles voreingestellt ist, oder eher nicht? Scheint ja alles zu schweißen
Which one would you recommend as best "overall" , best "ease of use", and "best price-wise"? And, do you have an opinion on the Harbor freight brand welders?
It depends on different factors. What would you be using it for? Do you want a simple machine with good user experience or the one with the most settings? I don't do reviews because I don't want to make a decission instead of you. These videos are informative and you should get a rough picture of what each machine is capable of.
bu kaynak makinasını yurtdışından türkiyeyemi getirttiniz?bu makinalardan 4+1 olanından almak istiyorum türkiyede yaşıyorum.bu ürün çin gümrük vergisi nekadar çıkıyor bilgi verirseniz çok memnun olurum.teşekkürler.
ali bende aynı seyi düşündüm bizim buraların fiyatları ıel orasıı arasında ucurum avr burda sadece tıg kaynagı dunyanın parası olmus almanyada STAHLWERK 250st ın satıcısı hamburg tarafında bır gurbetcı arabay koyup getırebılıryor yöntem bu sekılde diyer türlüsü . urun 1250 eyro kapı vergıler ve otv dahıl 1800eyoro da onlar ıcın ıstıyorlar baya bı arastırıdım. en guzel yönetım zaten alıp satıcı olmadıgımız ıcın gurbetcı dostlardan temın etmek
That's really sad... Some of the features that are available would greatly benefit DIY folks and perhaps even industry in the USA. Sad to see lobbying result in suppression of technological improvements.
Just completed the break-in period and so far the unit is operating perfectly ruclips.net/user/postUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y . I was amazed by just how quiet this little guy is. I kept having to walk down the driveway to the generator to make sure it was still running. In fact, the most annoying noise coming from the set-up is a high-pitched chirping coming from the pressure regulator on the propane line. I suppose it's possible my other propane-powered generator's pressure regulator is making the same noise, but the generator itself is so loud I've never noticed it. Build quality so far is excellent. My only nit is the service panel is a little tricky to remove. I feel like I might break off one of the plastic tabs when bending it back. I probably just need to work out the technique, so will not hold it against Champion.Next week I intend to fully load the unit to charge a large battery pack and will update this review if there's any problem (3000W continuous load vs a rated 3100W capacity while using propane). Absent any trouble there, I'm 100% pleased with this purchase.
Jasic are bloody good machines, I've a mma/tig inverter, best inverter I've used, really clean welding and auto arc force make it idiot proof.
My experience is within a certain price range all these Chinese machines use many of the same components and have essentially the same performance. The difference mainly being different bells and whistles that different users may prefer.
I had a Miller Sidekick for 30 years and it worked as good when I sold it as it did when new. It had to go because it was heavy.
I've used both the YesWelder 205DS versions. These welders perform as good as the Sidekick with more capability and more fine tuning adjustment if you prefer. Or use the Synergic function that I've found to be pretty spot on as I weld different thicknesses when doing a single project. Adjust amperage and to the wire speed close of very close to spot on.
Pretty sure the Stahlwerk Machine is manufactured in Germany and has been in business for nearly 25 years, or at least according to they information available on the their website... do you know of anyone having experiences with this company?
For sure it is like this!
This welding business is a wholesale business and you get what you ordered. Here in GER e.g. is a seller who always goes for bigger negative clamps ans cables.
BUT: There can be also a difference in software/firmware. And this can make a HUGE difference w/o a difference in manufacturer costs.
"Pretty sure the Stahlwerk Machine is manufactured in Germany "
NO it is not! It is "designed in GER" - which just = to I want to order those welder in white color.
This business is just 15km from my parents home town - they do just sales amd MKT over there.
But they do very good MKT, as we can see on your comment.
btw: I own a CT250 (or so). Wanted to start TIG, but gave up and thought I am too dumb. So I bought a PL MIG/MAG one. 1 year later I tried a TIG mashine from a friend and that worked nicely. Also the plasma cutter worked badly / hardly. On WIG vs. 3mm steel there was no welding under 160A (on 240V)
So we can assume: DOA (=dead on arrival) These have 5 year warrenty to I have 3 left to bring it back. 2-times Plasma, 8 times WIG, 12 times MMA - 2 years in the shed.
My 2ct.@@CoryHubbard
Stahlwerk the best at all
You should be talking and giving us the information about the machines and their settings, plus your observations as a welder on which you think is the best/ any down falls/ problems you experienced? This really shows us nothing other than they work in experienced hands.
Kaç para istanbuldan nereden alabilirim
I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.
I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.
Cât costă acest aparat cu 4 operații mulți functionale
Is perfect as is
Здравствуй Добрый день тебе хорошего дня береги себя не болей С наступающим тебя Новым годом Счастья вам здоровья Берегите себя
Sthalwerks are not so bad😮
muy buenas maquinas me gustan
the thert one the mig sound is perfect
My comments were base in my inspection and 20 years fabricator experience
Salut, Care ar fi topul :nr 1 Hitbox syn mig 200; nr 2 Jasic Mig 200 PFC; nr 3 Decapower xtramig 200syn ; nr 4 Stahlwerk ctm-250 st?
Ce mi-ai recomanda pt un incepator , nu ma intereseaza taiatul cu plasma doar pt sudat?
Great video ! Thank you for sharing the different types and results. 'Well' done.👍 I'll have to watch it again to see what machine is my favorit.
Qual é o preço desta máquina
nn
kk
@
I'll wait this video
Super Video,DANKE
Please make a video of welders like this that can also weld/cut other metals such as aluminium and cast iron PLEASE
I would if I have them. Send it to me
Ну Jasik с д.у пултом просто бомба Хочу сказать у меня 80 %оборудование от этого Бренда... 👍
Hi, danke für das Video. Bin Neuling, würdest du die hitbox als Neuling wählen, weil da schon alles voreingestellt ist, oder eher nicht? Scheint ja alles zu schweißen
Buy a device you like the most
@@MakeAndTest Okay, 👍😊
so in your opinion which was best you would buy from these
Arccaptain MIG200 for sure, and if you would like a more professional machine with PFC and a remote control then take the Jasic MIG
...and the winner is Telwin of course best of the best, but also very expensive and good quality welding machine....
Soz Newby 😂 ❤
Интересно!!! 👌 👌 👌
Which one would you recommend as best "overall" , best "ease of use", and "best price-wise"? And, do you have an opinion on the Harbor freight brand welders?
I am not from America, so I dont know what is in the harbour freight
great..
It is good weld machine. Available where,?.
which one do you like best?
Decapower 😊
nunca vi nada igual muito profissional
👏👏👏👍👍👍👋
STAHLWERK CTM-250 ST Bonjour es-ce que cette machine peut fonctionner en Amérique du nord?
Are those posted in order of preference?
Какай из них самый лучшие
Первый и третий
Pergunta qual é o custo desta máquina 4x1
Класс. 👏👍💪
Is it available in without Gas
Is it available in Punjab (India)
which of these devices is the best?
It depends on different factors. What would you be using it for? Do you want a simple machine with good user experience or the one with the most settings? I don't do reviews because I don't want to make a decission instead of you. These videos are informative and you should get a rough picture of what each machine is capable of.
1 и 3
From what I've seen the Stahlwerk is not available in the US.
Hola hoy cuato dinero cuesta esta que estas probando??
❤How can buy it?
Google search
Necesito saber cuanto me puede costar una de esa plantas 4 en 1 puesta en cuba
Wen can fine this mashing
Máquina e top dimais
bu kaynak makinasını yurtdışından türkiyeyemi getirttiniz?bu makinalardan 4+1 olanından almak istiyorum türkiyede yaşıyorum.bu ürün çin gümrük vergisi nekadar çıkıyor bilgi verirseniz çok memnun olurum.teşekkürler.
ali bende aynı seyi düşündüm bizim buraların fiyatları ıel orasıı arasında ucurum avr burda sadece tıg kaynagı dunyanın parası olmus almanyada STAHLWERK 250st ın satıcısı hamburg tarafında bır gurbetcı arabay koyup getırebılıryor yöntem bu sekılde diyer türlüsü . urun 1250 eyro kapı vergıler ve otv dahıl 1800eyoro da onlar ıcın ıstıyorlar baya bı arastırıdım. en guzel yönetım zaten alıp satıcı olmadıgımız ıcın gurbetcı dostlardan temın etmek
Please do can I use oxygen instead of nitrogen gas? For TIG
No
Buongiorno, posso chiederti cosa ne pensi della saldatrice stahlwerk mig 200 doppio impulso? Grazie
La verdad es una gran máquina de soldar en que precio anda amigo
Link in description
Gostei muito da máquina e gostaria de saber o preço
Read the description
Jasic welding machine made in any country.
Pedro
Conto
Vale.esa
Impresora
Apakah mesin last ini sdh ada di Indonesia?
Top
where can i buy this weldig machine?
On Amazone 🧑🏭🤗
Классный агрегат.
Ассалом алекум,каяктан сатып алсам болот мындай шумдук оокатты?Кыргызстанда барбы?
Where to buy this item?
Hay You când do a video with i weld gorilla cut 45 pilot please thank you 😊😊😊😊😊😊.
Gdzie i za ile można bezpiecznie kupić jedną z tych spawarek ? Szukam ich od dawna ale trafiają się tylko oszuści
Na olx już sa
Quiero comprar habrá ése producto en Perú?
Niec
Ola me puedes decir que precio tiene un equipo de esos
when a video with best welders of 2024?
At the end of the year 2024
И какой из них лучше ?
Jasic is the best
Хороший обзор.
No coments or opinion, what works better?
You have to decide for yourself. Im not here to force my opinion
Mission price entha
Will any of them tig weld aluminum
no )
Лучшесть сварочных аппаратов определяется красивостью швов?
Alabileceğimiz telefon ve nekadar
Berapa harganya.
Macarico é Rey sempre será
Qayerdan topsa bo‘ladi bu aparat dan
how i can order do you have that product in the philippines
Hello... How can I order and how much, do you have a website to order?
Link are in description
@@MakeAndTest hola una pregunta donde puedo comprar la máquina blanca la que es 4 en 1 vivo en napa California Estados Unidos de America
Cuánto cuesta la planta de soldar
Me urge una de ese modelo
Cuanto cuesta
I want to buy how much OMR
How to order,How much?
Just google the prices bro I don't think he's gonna go back to add that info
Links are in description
@@jonathangarzon2798 I like it
How much price this welding machine
Where can I order please
Каердан олсак булади бу апаратни доставка борми?
Tem ela no mercado brasoleiro
E qual o preço??
لما تعلنو عن الاسعار منخلال العرض
I need it how can I get it
👏✌️
Best MIG welding please request me
ເຮົາຢາກໄດ້ຫນ່ວຍຫນິ່ງ ນາເຈົ້່າ
Cho mình xin giá tiền bao nhiêu vậy bạn
Boa noite , qual o valor dessa máquina?
Sadly .... none of these are available in USA🇺🇸 .... 😢
However, your content is appreciated & intelligent 👍
Anyone know of a machine for the US market ???
That's really sad... Some of the features that are available would greatly benefit DIY folks and perhaps even industry in the USA. Sad to see lobbying result in suppression of technological improvements.
These are machines made to work on household plugs, single phase. I think the amp limit implyed by the 110V don't allow for this type of machines.
Máy 4chuc năng bao nhiêu tiền
от полуавтомата главное на сколько тонкое железо может варить и не прожечь, а не толстое проварить
Pricelist boss
Donde puedo encontrar esa máquina?? La primera del vídeo? Me gustó esa máquina.
A onde tem desta primeira máquina
Qual e o valor dela
Yishu Masih ka price batao kitne tak le hai Lena hai
ما سعر هذه الاله
اين توجد هذة الالة
62 trần Huy liệu Khuê Trung cẩm lệ đà nẵng Việt Nam
😮
Ga bao nhieu 1 may han a
كم السعر من فضلك
Where can I order this from I need one
Links are in the description
bhai is welding machine ka price kitna h ek machine chahiye thi
Fiyeti kaç para
Belinya di mana ya.
Precio y donde puedo conseguirla
Precio de las máquinas