Thanks for the entertainment. A lot of good information about the different companies and travel experience. A little long but I did listened till the end. 😅. … Tim does the manker e05 ii 519a version is also regulated like the cool white version?
I just did a runtime test of the Manker E05 II Copper 519A on High with the included 14500 cell and the output is well regulated. 932 lm @ turn on. 778 lm @ 30 seconds. It dropped to 276 lumens after a few minutes and maintain a constant output of about 270 lm until 1 hour 9 minutes. It then dropped to about 180 lm and maintained that for another 10 minutes before switching off around 1 hour 21 minutes. I think it's supposed to drop to 6.5 lm and maintain that for 4 hours but low voltage protection may have kicked in at 3.21V and it simply turned off at 1 hour 21 minutes on High. I'll do a runtime test for Medium (14500) next. I kind of expect that it'll last more than 6 hours.
@@TorchHacker thanks for doing that! Great! So it maintains almost the same output as the 1300 version. Seems pretty good to me and you get the better tint.
@@TorchHacker the Qin mountain range and Huai River ( 秦岭淮河）divide the China as north and south. It is not just geography, but also culturally. The north's staple is mainly noodle and south rice.
Nice video!
Would be fun to visit some day...
Thanks for the entertainment. A lot of good information about the different companies and travel experience. A little long but I did listened till the end. 😅. … Tim does the manker e05 ii 519a version is also regulated like the cool white version?
Thanks for listening! I'll measure one the modes for the Manker E05II 519A Copper to find out. I haven't tested the 519A version.
I just did a runtime test of the Manker E05 II Copper 519A on High with the included 14500 cell and the output is well regulated. 932 lm @ turn on. 778 lm @ 30 seconds. It dropped to 276 lumens after a few minutes and maintain a constant output of about 270 lm until 1 hour 9 minutes. It then dropped to about 180 lm and maintained that for another 10 minutes before switching off around 1 hour 21 minutes. I think it's supposed to drop to 6.5 lm and maintain that for 4 hours but low voltage protection may have kicked in at 3.21V and it simply turned off at 1 hour 21 minutes on High. I'll do a runtime test for Medium (14500) next. I kind of expect that it'll last more than 6 hours.
@@TorchHacker thanks for doing that! Great! So it maintains almost the same output as the 1300 version. Seems pretty good to me and you get the better tint.
budgetlightforum.com/t/manker-e05-ii-edc-torch-review-1-300-lumens/221620/20
Here's some real torch nerds 🤣
just FYI, the burnt color on Ti can be removed easily thru abrasion. The blurple look is only on the surface
Nice share, by the way Jiangsu is in the middle along the coastline in China, not really north.
Thanks! Is the Yangtze River where north and south split? I thought that Weifang might be considered to be north.
@@TorchHacker the Qin mountain range and Huai River ( 秦岭淮河）divide the China as north and south. It is not just geography, but also culturally. The north's staple is mainly noodle and south rice.