Turning a Pen on a Lathe (Pen Making How-to)

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2024

Комментарии • 143

  • @CraftSuppliesUSA
    @CraftSuppliesUSA  6 лет назад +15

    If you liked the video, give it a thumbs up and be sure to subscribe to our channel!!
    Visit us online at www.woodturnerscatalog.com for the best selection of woodturning supplies in the industry.

  • @thunderball11111
    @thunderball11111 5 лет назад +17

    Describes how amazing it is in fully dead inside monotone. Like a boss

  • @davidfriedman3962
    @davidfriedman3962 5 лет назад +17

    This is one of the best tutorials for turning pens. I will play this again when I start turning pens. Thank you.

  • @nightmaresnightly
    @nightmaresnightly 3 месяца назад

    Awesome video! When making pens in shop class like 15 years ago I do not remember this many steps haha

  • @garretschneider3580
    @garretschneider3580 6 месяцев назад

    This video was amazing and answered SO MANY questions

  • @xmchillin
    @xmchillin 11 лет назад +2

    Thanks for the fast response. Currently, I make the cartridge pens (.308/30.06) and give them to returning vets. Your video started the wheels turning.... I have subscribed...

  • @sootydave1
    @sootydave1 11 лет назад +23

    I have to say good video. How Ever I have 1 suggestion to make. You say use a cloth rag, Better still, Paper towel. This way should it catch you will not get the chance of injury...

    • @Bamcrafting
      @Bamcrafting 3 года назад

      And it works verry good so the wax doesn’t crisp on the cloth

  • @kl-uk5xj
    @kl-uk5xj 3 года назад +1

    I'm looking to purchase all the accessories used In this video. I just purchased an 8x13 USA built grizzly mini lathe and about 80 different exotic species of pen blanks. Never have I turned a pen in my life but when I grab a hobby I try to dive deep into it! I'm going to give you guys a call tomorrow hopefully I can place an order over the phone!

  • @jugogaming
    @jugogaming 5 лет назад +3

    It’s a fun project I have made 2 pens and 2 pencils they look beautiful and when people hear I made them they always ask if I could make them one.

  • @Grockern55
    @Grockern55 12 лет назад +5

    made a carbon fibre slimline today, my god it is gorgeous

  • @chandrakanthas5571
    @chandrakanthas5571 Год назад

    Excellent video. Very professional.

  • @knothead5
    @knothead5 2 месяца назад

    Good basic info for anyone wanting to turn pens. BTW, there is a difference between vice and vise. My wife made me give up the first one.

    • @jaesbow
      @jaesbow Месяц назад

      Nope, another case of Brit vs Yank. Vise in USA = Vice in UK.

    • @knothead5
      @knothead5 Месяц назад

      @@jaesbow Hmm. AS mentioned, my wife made me give up vices years ago. Have a friend who is a British ex-pat. We fish together and compare words and phrases. Cheers.

  • @aarondrossart6026
    @aarondrossart6026 2 года назад +1

    Taking a turning class at Rockler soon! Hoping to get a lathe and making projects like this.

    • @judyl.761
      @judyl.761 16 дней назад

      Did you ever get a lathe?

  • @Bamcrafting
    @Bamcrafting 3 года назад

    I have 2 extra bushings and when I started I didn’t have the thing to clear the excess wood an it works just fine I also make them curvy not flat and it looks great and people love them also what drill press do you have because I cannot drill through the whole way without moving it because my drill press is the wen 8

  • @darrinblitch4912
    @darrinblitch4912 4 года назад +1

    Thanks for a great video!!!

  • @BinoyManu-zb5bg
    @BinoyManu-zb5bg 2 месяца назад

    Super that's a very wonderful😊😊

  • @kellybarr6576
    @kellybarr6576 3 года назад

    Thank you so much for a very informative video. It was great and I’m gonna turn my first pen. Thanks.

  • @caponemachuca5191
    @caponemachuca5191 6 лет назад +5

    I've recently become very, VERY interested in making my own pens. Where can I find a shopping list of all the equipment I would need to begin this hobby? There's so much to learn and I don't know where to begin.

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  6 лет назад +1

      Welcome to the pen turning community!! It's very hard to know where to start, based on your budget and other factors. Please call us at 1-800-551-8876 and we'll get you all sorted. Thanks!!

    • @The_beauty_ofanimals
      @The_beauty_ofanimals 6 лет назад

      Making pens are really fun and a good way to make money I am 14 and turned this into my hobby for the last month and it is so fun

    • @17thstatefishing77
      @17thstatefishing77 4 года назад

      Really all you need is blanks lathe gouge skew

  • @MyCraftyCrafts
    @MyCraftyCrafts 12 лет назад +2

    this is cool i wish that i had a machiene like that!

  • @hobel73
    @hobel73 5 лет назад +2

    The video was very helpful. I just placed on order on your site for pen making kits and tools.

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  5 лет назад +1

      Thank you for the comment. Send us some pictures of your finished pens.

  • @KedaWoodDye
    @KedaWoodDye 7 лет назад +5

    Awesome video! Thank you for sharing your technique. Have you ever used wood dye kits for coloring the wood? I have to get a lathe :(

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  7 лет назад +2

      Wood dye kits can work well once the pen is turned to shape, but you can also buy pre-colored blanks that keep their color while turning them down. Time to get a lathe :)

    • @KedaWoodDye
      @KedaWoodDye 7 лет назад +1

      I know right?!?! Bahaha it is time. Thank you for the extra push I needed 😉

    • @KedaWoodDye
      @KedaWoodDye 7 лет назад

      I used to have my grandfathers old one, but it has broken down. I haven't done a lot of turning, since my old lathe went down. I definitely need to get back to it. It was relaxing and Lord knows I need that hahaha thank you again for sharing!

  • @KingKan
    @KingKan 2 года назад

    Satisfying video!!

  • @CraftSuppliesUSA
    @CraftSuppliesUSA  12 лет назад +4

    Definitely start with sand paper. If it's stabilized burl you can use micro mesh, otherwise just sand to 600 grit. You can use a CA Pen finish if you're wanting an ultra glossy look.

  • @Soultergeist
    @Soultergeist 9 месяцев назад

    Hello, just getting into this for school. How high and far should my tool rest be from the blanks or mandrel?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  9 месяцев назад

      You want the cutting edge of the tool to be at the center height of your blank, so you have have to raise it up or down depending on the thickness of the tool you're using. And you want the tool rest as close to the blank without contacting the rest.

  • @jayperdue1369
    @jayperdue1369 6 лет назад +3

    So when you drill the holes in the blanks does it have to be perfectly straight or when you turn it shouldn't the hole become the new center and it will round from that point?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  6 лет назад +4

      The hole will be the new center, because drilling is never perfect. A hole that's a little bit off will not affect the finished pen.

    • @jayperdue1369
      @jayperdue1369 6 лет назад +2

      Thanks. I was pretty sure but I had one to get kinda little off and wanted to make sure before I work on the mandrel.

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  6 лет назад +3

      Feel free to give us a call at 1-800-551-8876 if you ever need more in-depth help.

  • @carolcambray1112
    @carolcambray1112 3 года назад

    This is sooo beautiful!!!

  • @devinthomson9027
    @devinthomson9027 9 лет назад +2

    yea this helped a TON!

  • @mariecrum669
    @mariecrum669 7 лет назад +1

    If I choose to turn a slimline kit with a gunmetal finish, would I still use a brass tube, because it wouldn't match the finish on the tip, center band, and the end of the pen

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  7 лет назад +1

      The brass tube will hide behind all of the components of the pen. It doesn't usually matter what color it is unless you're working with transparent acrylics.

  • @wood4nothing284
    @wood4nothing284 5 лет назад +6

    Very nice pen ,it looks very slick. I've just been given a almost new pen lathe and accessories,blanks etc so I may be putting up a video of my very first go at turning .It could all go drastically wrong lol.
    Cheers
    Tim from Wood 4 Nothing

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  5 лет назад +2

      Send us a link once you've finished the video. We'd love to see it

    • @wood4nothing284
      @wood4nothing284 5 лет назад +2

      @@CraftSuppliesUSA I'll see how wrong it goes first lol
      Cheers
      Tim

  • @shrekisbae21
    @shrekisbae21 4 года назад

    very nice papi, Ill come back in time for thanksgiving dont worry

  • @caseyalan5398
    @caseyalan5398 2 года назад

    Awesome tutorial. My favorite part was when the hole you drilled was WAY OFF CENTER 😂. Just giving you a hard time, awesome video!

  • @olivers3973
    @olivers3973 Год назад

    If it's a 7mm brass tube, do I need to use a 6mm pilot shaft on the barrel trimmer? and do all slimline pens have a 7mm tube?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  Год назад

      Hey Oliver, On 7mm tubes use a 7mm pilot shaft. All Slimlines have a 7mm tube.

  • @robira1313
    @robira1313 3 года назад

    What on earth is a barrel trimmer? @1:23 I've been woodworking for 8 years and I've never heard of this. (but i"ve only been woodturning for 5 months.)

  • @Elizabeth-rq1vi
    @Elizabeth-rq1vi 2 года назад

    Why didn’t you use a roughing gouge to round the blanks? I find it goes much faster with one. I just may be impatient.
    You didn’t line up the two blanks on the mandrel, wouldn’t it make rounding easier?
    Did I miss which pen kit you were using? I have to measure out the blank lengths because each pen kit requires different lengths…one even requires leaving 11/13” barrel exposed! And that’s the kit I’ve been practicing with!
    A cautionary note for beginners, I personally have not used CV glue since my first attempt…the glue dried before the tube was completely in the blank! I’ve found two part epoxy more my speed, which isn’t that slow either! I asked for the 75s drying one but, wow! Did it dry fast! I’m afraid to try using it as a finish but does a bang up job on non-pen making jobs!

    • @michaelsorensen7567
      @michaelsorensen7567 5 месяцев назад

      My experience, it can help me figure out lining up the grain again, but doesn't change turning all that much. You still have to knock off the corners, and you'll still get to round either way. Others' mileage may vary

  • @Poulamilahiri154
    @Poulamilahiri154 5 лет назад +1

    How can I purchase one of these amazing creations being in India?

  • @ericvillarreal1618
    @ericvillarreal1618 Год назад

    I miss doing this

  • @mariecrum669
    @mariecrum669 7 лет назад +3

    Do you recommend CA glue, or just epoxy?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  7 лет назад +2

      Epoxy tends to bond a little better (esp on acrylics), but it does take longer to dry. CA is great because it dries quickly and holds really well.

  • @cicipadi1451
    @cicipadi1451 Месяц назад

    Where can I get a pen kit, so I can make one like that?

  • @Adam_Strachan
    @Adam_Strachan 2 года назад

    Bought a bunch of blanks now I need the guts where can I buy the guys and mechanical stuff at
    I’m having a hell of a time trying to find them with out the blocks can you help me out in we’re to find them please

    • @michaelsorensen7567
      @michaelsorensen7567 5 месяцев назад

      Not sure if you ever found any, Rockler has them for sale on their website. Fair variety of pen kits, which is just the hardware, no blank

  • @booperthebest1501
    @booperthebest1501 11 месяцев назад

    Any way I can put on a polyurethane finish instead of can or the one in the vid?

  • @hniere
    @hniere 6 лет назад +2

    I have to do this as my construction project but what’s the measurements that I have to cut the wood blank in half???

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  6 лет назад +3

      The blanks need to be slightly longer than the brass tubes.

  • @mikeygaming7306
    @mikeygaming7306 8 лет назад +2

    Hi I'm just wondering where you got the supplies for the pen

  • @landondehart3032
    @landondehart3032 5 лет назад +2

    Love Liza koshys music in the background

  • @danswoodworkingdreamfromst5152
    @danswoodworkingdreamfromst5152 6 лет назад +2

    Where do I by the mechanical kit for making my own wood pen I can't find anywhere just wood pens already assembled

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  6 лет назад +1

      Every Pen Kit we sell is a kit. You'll need to complete them yourself. Here's a link. www.woodturnerscatalog.com/t/1/Ballpoint-Pen-Kits

    • @samlowe5791
      @samlowe5791 5 лет назад

      Go to Pen State Industries

  • @barend39
    @barend39 3 года назад

    Do you need to use glue activator or does that just speed up the drying process?

    • @00Tottr
      @00Tottr 2 года назад

      just used to speed up the drying process, and ensure the brass tube doesn't slip out when drying. make sure to let the adhesive dry on its side, on a flat surface. I once had a pen ruined because it was tipped while drying, and the tube slid out half an inch.

  • @robertlee8400
    @robertlee8400 4 года назад +1

    First off easy to make & I have a wooden pen & a metal pencil

  • @michaelrice3329
    @michaelrice3329 Год назад

    What was the wood you used in the thumbnail? It looked curly

  • @numantemiz9571
    @numantemiz9571 7 месяцев назад

    2:42 de kullanılan malzeme nedir acaba

  • @dominicgilman6097
    @dominicgilman6097 Год назад

    What's the size of the blanks??

  • @L.Helmers_Wood_Turning
    @L.Helmers_Wood_Turning 5 лет назад +1

    Does it cost much to send to Australia?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  5 лет назад +1

      Call us at 1-800-551-8876 and we can get you a quote, or you submit an order online and wait for a quote.

  • @nickyhogan8072
    @nickyhogan8072 2 года назад

    what are the measurements for the bushings?

  • @asian2kbaby993
    @asian2kbaby993 2 года назад

    How do I fix it when the led won’t come out it doesn’t show the tip

  • @tommycarey5201
    @tommycarey5201 2 года назад

    can anyone tell me can you use malamine on wood or ressin

  • @CraftSuppliesUSA
    @CraftSuppliesUSA  11 лет назад +1

    Yes, Micarta turns very easily.

  • @alecdeeps4585
    @alecdeeps4585 7 лет назад

    What are you using on your tail stock to hold the mandrill?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  7 лет назад

      It's just a generic cup center. 60 Revolving Centers work great too!

  • @Vijaykumar-cu6xz
    @Vijaykumar-cu6xz 3 года назад

    How much does this pen costs

  • @wdesigns2845
    @wdesigns2845 3 года назад

    I just made a pen today in my Ag class

  • @Venom-Bell_420
    @Venom-Bell_420 Месяц назад

    What size barrel trimmer

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  Месяц назад

      The slimline requires a 7mm pilot shaft with a 3/4" barrel trimmer head.

  • @Smithyy12
    @Smithyy12 8 лет назад

    hi,
    i have turned a few pens with different types of wood,, and also using a CA finish , but i seem to be getting white parts (spots) appearing under the CA after i have used the micro mesh pads.
    Any help would be grate thanks ... Ash

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  8 лет назад

      So sorry for the late reply. It's either moisture under the CA Finish, or you're using too much accelerator when curing the CA. Hopefully this fixes the white spots. Please call us at 1-800-551-8876 if you have any further questions or concerns. We're always here to help. Thanks.

    • @Smithyy12
      @Smithyy12 8 лет назад

      thank you , i will keep an eye out

  • @TwistedViewer
    @TwistedViewer 5 лет назад +4

    I see... I have to buy quite a few stuff...

  • @BlackCat_2
    @BlackCat_2 8 лет назад

    So you really need a vise or pen press to put them together? You can't just do it by hand? - Heidi

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  8 лет назад

      You'll always need to use a vise or pen press when pressing in pen parts. The parts need to be tight for the pen to work properly and to handle daily use.

    • @jilliannitz8474
      @jilliannitz8474 7 лет назад

      I really would recommend a pen press. The vast majority of my breaks when making pens happens in the process of putting them together. The wood is very thin at this point and splits easily.

  • @balentincamargo5248
    @balentincamargo5248 4 года назад

    How to to wait for the glue to dry

  • @ДмитрийФильченков-м8р

    Где можно заказать фурнитуру, с доставкой в СНГ(Беларусь)?

  • @sandsmith4750
    @sandsmith4750 9 лет назад

    Hey, What Type and size Gouge is that ?

  • @danielbuffington2041
    @danielbuffington2041 5 лет назад +1

    What was the measurements of the piece you started with

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  5 лет назад +1

      Pen blanks are generally 3/4" x 5". Here's a link to some if you're interested. www.woodturnerscatalog.com/p/8/5047/Pen-Makers-Choice-Exotic-Pen-Blanks

    • @nickyhogan8072
      @nickyhogan8072 2 года назад

      @@CraftSuppliesUSA is the measurement in inches or centimeters or millimeters?

  • @xmchillin
    @xmchillin 11 лет назад

    Can a pen be made from micarta?

    • @aventador832
      @aventador832 6 лет назад

      Absolutely! They actually turn quite nicely!

  • @kylerandall1958
    @kylerandall1958 5 лет назад +2

    has any one have the wen 8 in x 12 in?

    • @batman6381
      @batman6381 5 лет назад

      I do. Works well enough.

    • @batman6381
      @batman6381 5 лет назад

      You'll need an MT #1 mandrel for your wen

  • @tomjagger7392
    @tomjagger7392 3 года назад

    hello james

  • @lynnhudson4854
    @lynnhudson4854 2 года назад

    Fanten pen kit demos

  • @isaiahmercado8713
    @isaiahmercado8713 7 лет назад

    can someone list the steps?

    • @CraftSuppliesUSA
      @CraftSuppliesUSA  7 лет назад

      Here's a link to our online Slimline PDF. www.woodturnerscatalog.com/docs/slimline_pen.pdf

  • @lynnhudson4854
    @lynnhudson4854 2 года назад

    Fanten pen kits

  • @JayzAppleHelp
    @JayzAppleHelp 11 лет назад

    its called a lathe it is expensive but that pay off if you sell what you make

  • @mukeshkumawat8226
    @mukeshkumawat8226 4 года назад

    Can you make a business deal with us I am also a handicraft supplier

  • @lynnhudson4854
    @lynnhudson4854 2 года назад

    Tim hudson

  • @ChuckBoriss
    @ChuckBoriss 12 лет назад

    President of czech republic like this

  • @mihaelaturcu2530
    @mihaelaturcu2530 5 лет назад +2

    Heya, This is a good video here. The most complete woodworking plans that I have ever used was Toms Magic Wood (just google it). Without a doubt it contains the most useful woodworking projects that I have ever tried.

  • @cogkis
    @cogkis 7 лет назад +1

    I don't have a lathe...

  • @ardvarkkkkk1
    @ardvarkkkkk1 12 лет назад +2

    Make sure you have other projects in mind. After about two or three pens, boredom sets in.

    • @jr6105
      @jr6105 4 года назад +2

      ardvarkkkkk1
      Not if you sell them

  • @scarekrow9
    @scarekrow9 10 лет назад

    I didn't know Piccolo could turn pens... (blink)

  • @mikel4510
    @mikel4510 3 года назад +1

    Easy on the budget?! 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

  • @puryeareaker7975
    @puryeareaker7975 4 года назад

    My husband used these plans from Stodoys and he is very pleased.

  • @markdixon8088
    @markdixon8088 5 лет назад

    This is a great woodworking book I`ve ever read, “Bαzοmο Tdy Plαn” (Google it). Both novice and some skilled wood worker could gain a lot of general details out of this reading material. I`ve been very amazed how frequently I use this to look up woods at places like to restore and also salvage spots. .

  • @Happ5
    @Happ5 3 года назад

    Ello I liek cows

  • @dancooper1914
    @dancooper1914 12 лет назад

    If you're talking about "spinning", you must have missed that part so watch again and pay attention. If you're talking about "spining", you should see a doctor.

  • @2muchtj606
    @2muchtj606 7 лет назад

    Liza koshy wya

  • @petermarkesteyn
    @petermarkesteyn 11 лет назад +1

    Excellent video. Very professional.