There's an override for low gear on the back of the left handlebar behind the start button. You just hold that down if you don't want to deal with the speed limiter
Hello there, I have a 2021 Overland and mine has a override lever on left hand grip for low gear and reverse. Cat delete is a must, cost $50 at welding shop and about 1 hr of my labor. You will appreciate the engine brake if you ever ride mountain trails. Happy Trails
That’s awesome what did you do just cut the cat out and weld a small portion of pipe where the cat was ? I wonder if I could take mine off and get some local muffler shop to do that to mine if it would save me couple hundred sucks for me bought the machine and injured my shoulder dang thing just sitting in building not even getting road except when my wife takes it round the subdivision
Brother, had mine built by MSC. Headers, tune, upper engine mount and one inch spacers. The headers and aftermarket exhaust will take care of the heat. Main street cycles has everything. Get ahold of them. Override is on the left front controls. Foward on the instruments. Hold it down in low or reverse for max speed. May work for top speed? Unscrew the throttle screw too. Right side controls, above the thumb throttle. Hope your shoulder gets better. Chiropractor helped me brother.
You can snip one of the wires going to the ECU and it will remove the low rev limiter. It will then be in the 30's before it runs out of gear. You can google this and there is someone on youtube that shows you how to do it. You can also just get an ECU tune and it will take care of that plus add a little more fuel if you ask to help with the heat while going slow. You'll gain some performance with the tune also.
Thanks for advise can’t wait to get that done I injured my shoulder and haven’t even been able to ride it but once since I got it killing me dang thing sitting in building but my wife takes it round subdivision once or twice I think it has total of 50 miles on 16 trail and the rest subdivision lol picked a crappy time to buy a machine dr said it’s gonna be 6 months before I even go back to work I was gonna try and ride it before my surgery but thought nah I better not hurt to much as it is drinking beer in the recliner
Thanks we like it so far haven’t been able to ride it much just round subdivision I had to have a shoulder surgery soon as I bought it but it have lots of power and rides smooth
My dealership gave me the two up seat for free and took 200 off the price of a plow I guess you need to ask and see if they want to loose the deal or sell a new unit
@@keithbelz2952 they could care less as they can’t keep any big bore unit in stock price is what it is and they most likely will tell you that or laugh at you they wouldn’t even install the synthetic rope atvs where your at must be Easily available here in the south not so much I waited nearly a year on a can am and never got it same with the cf force no one around for many miles had one but this dealer.I was not gonna haggle over few hundred dollars when I had looked for over a year for any machine over 750 cc
Yeah mine too and after what little trail riding I’ve done with it and it kills me to say this cause I wanted a big machine but some times that tank is hard to fit between trails lol but soon as I get my shoulder injury better I’m get back to riding it I’ve heard cat delete makes a world of difference with the heat issue maybe I can do that soon
it looks like they made the 2024 800 and 1000's better with the turning radius. i doubt they changed the layout of the exhaust. so yeah, getting better outflow by eliminating headers works well. i added more heat shield to the pipe and inner side of the plastic panel. it worked a little bit. one good thing, its nice in the winter haha@@whiterhinooutdoors4572
I was trying to tell if it loud our if that was just wind noise i had 2021 uforce 1000 loved everything about it except for how loud it was in the cab you had to wear ear plugs if someone riding with you had to stop to talk so I sold it
I don’t think it’s loud on the trails to me it’s most likely the wind my camera picked up we wasn’t going fast and we could talk and hear each other I haven’t rode it much soon as I bought it I had to have a shoulder rotator surgery my arm still hurts and I just haven’t felt like riding all the 50inch parks round me are closed anyways
I appreciate the input but it’s time to take it out in the woods and see how it does then give us another video as I see a tag on the handlebars telling me that it’s brand new. Let me know how long it last and how it runs after a while thank you.
Oh I will only had it on trails once I’ve injured my shoulder having surgery July on it just don’t think I’m tough enough to get out on the trails with tore shoulder yeah it’s new I need to take that tag off but like I said I’ve road it once on trails and wife burned the subdivision up with it lol but for sure trail ride needs done not sure how long it will be for my shoulder to recover so not sure when that ride will happen
I’m sorry to hear about your shoulder. I had mine done eight months ago the first six months of recovery was slow and annoying because I wasn’t sure if they fixed it or not but it’s starting to get better so I wish you the best. Enjoy your new machine I’m sure it’s gonna treat you right
I wish I hadn’t even bought it now and would have did stuff to my side by side I have it street legal and I’m able to drive it on the roads with little aggravated shoulder pain that cforce is a very big machine much larger than my brute force I have to say it rides like a Cadillac so my dr said 4-6 month recovery time same as you what it took you
@@whiterhinooutdoors4572 me and you were in a very similar situation. I had my shoulder repaired in January while I was recovering I bought a brand new 2023, Can-Am outlander max 850 I go riding with my neighbor that has a side-by-side and I’d rather be on the four wheeler, I see more people get hurt on the side by sides by rolling them than anybody does on a four wheeler hang in there good time are coming you’ll be out there tearing up the trails in no time
Low gear is made to go slow lol... if you want to go fast then go hi gear.. you are suppose to use low gear only on big hills or when uploading in your trailer.. otherwise keep that thing on hi and send it
There's an override for low gear on the back of the left handlebar behind the start button. You just hold that down if you don't want to deal with the speed limiter
Did not know that will check it out next time I ride
Hello there, I have a 2021 Overland and mine has a override lever on left hand grip for low gear and reverse. Cat delete is a must, cost $50 at welding shop and about 1 hr of my labor. You will appreciate the engine brake if you ever ride mountain trails. Happy Trails
That’s awesome what did you do just cut the cat out and weld a small portion of pipe where the cat was ? I wonder if I could take mine off and get some local muffler shop to do that to mine if it would save me couple hundred sucks for me bought the machine and injured my shoulder dang thing just sitting in building not even getting road except when my wife takes it round the subdivision
Brother, had mine built by MSC. Headers, tune, upper engine mount and one inch spacers. The headers and aftermarket exhaust will take care of the heat. Main street cycles has everything. Get ahold of them. Override is on the left front controls. Foward on the instruments. Hold it down in low or reverse for max speed. May work for top speed? Unscrew the throttle screw too. Right side controls, above the thumb throttle. Hope your shoulder gets better. Chiropractor helped me brother.
You can snip one of the wires going to the ECU and it will remove the low rev limiter. It will then be in the 30's before it runs out of gear. You can google this and there is someone on youtube that shows you how to do it. You can also just get an ECU tune and it will take care of that plus add a little more fuel if you ask to help with the heat while going slow. You'll gain some performance with the tune also.
Thanks for advise can’t wait to get that done I injured my shoulder and haven’t even been able to ride it but once since I got it killing me dang thing sitting in building but my wife takes it round subdivision once or twice I think it has total of 50 miles on 16 trail and the rest subdivision lol picked a crappy time to buy a machine dr said it’s gonna be 6 months before I even go back to work I was gonna try and ride it before my surgery but thought nah I better not hurt to much as it is drinking beer in the recliner
Looks great from council kev uk
Thanks we like it so far haven’t been able to ride it much just round subdivision I had to have a shoulder surgery soon as I bought it but it have lots of power and rides smooth
Did it come with the 2 up seat and the storage? Or was one an extra purchase?
The storage came with it but the passenger seat was extra 575$ I think it should have came with it but they don’t
My dealership gave me the two up seat for free and took 200 off the price of a plow I guess you need to ask and see if they want to loose the deal or sell a new unit
@@keithbelz2952 that’s awesome! I am stuck between this, or a Uforce 1000/1000xl
@@keithbelz2952 they could care less as they can’t keep any big bore unit in stock price is what it is and they most likely will tell you that or laugh at you they wouldn’t even install the synthetic rope atvs where your at must be Easily available here in the south not so much I waited nearly a year on a can am and never got it same with the cf force no one around for many miles had one but this dealer.I was not gonna haggle over few hundred dollars when I had looked for over a year for any machine over 750 cc
@@whiterhinooutdoors4572 I'm up in Maine in my dealer had 5c Force 1000
Nice video ❤❤❤
Thanks man hopefully I can start riding more shoulder getting better but it’s taking a long time to heal rode little bit today but still hurting
Redneckgarage has a detailed video on snipping that wire he shows you exactly were to locate it!
Shoot yeah I’m do it when I get my shoulder surgery and recover
Did yours come with a manual?
Yes
yeah the heat off the exhaust is intense on the right side. and the turning radius is horrible. two of my biggest complaints
Yeah mine too and after what little trail riding I’ve done with it and it kills me to say this cause I wanted a big machine but some times that tank is hard to fit between trails lol but soon as I get my shoulder injury better I’m get back to riding it I’ve heard cat delete makes a world of difference with the heat issue maybe I can do that soon
it looks like they made the 2024 800 and 1000's better with the turning radius. i doubt they changed the layout of the exhaust. so yeah, getting better outflow by eliminating headers works well. i added more heat shield to the pipe and inner side of the plastic panel. it worked a little bit. one good thing, its nice in the winter haha@@whiterhinooutdoors4572
I was trying to tell if it loud our if that was just wind noise i had 2021 uforce 1000 loved everything about it except for how loud it was in the cab you had to wear ear plugs if someone riding with you had to stop to talk so I sold it
I don’t think it’s loud on the trails to me it’s most likely the wind my camera picked up we wasn’t going fast and we could talk and hear each other I haven’t rode it much soon as I bought it I had to have a shoulder rotator surgery my arm still hurts and I just haven’t felt like riding all the 50inch parks round me are closed anyways
I appreciate the input but it’s time to take it out in the woods and see how it does then give us another video as I see a tag on the handlebars telling me that it’s brand new. Let me know how long it last and how it runs after a while thank you.
Oh I will only had it on trails once I’ve injured my shoulder having surgery July on it just don’t think I’m tough enough to get out on the trails with tore shoulder yeah it’s new I need to take that tag off but like I said I’ve road it once on trails and wife burned the subdivision up with it lol but for sure trail ride needs done not sure how long it will be for my shoulder to recover so not sure when that ride will happen
I’m sorry to hear about your shoulder. I had mine done eight months ago the first six months of recovery was slow and annoying because I wasn’t sure if they fixed it or not but it’s starting to get better so I wish you the best. Enjoy your new machine I’m sure it’s gonna treat you right
@@johndusablon1895 thanks man
I wish I hadn’t even bought it now and would have did stuff to my side by side I have it street legal and I’m able to drive it on the roads with little aggravated shoulder pain that cforce is a very big machine much larger than my brute force I have to say it rides like a Cadillac so my dr said 4-6 month recovery time same as you what it took you
@@whiterhinooutdoors4572 me and you were in a very similar situation. I had my shoulder repaired in January while I was recovering I bought a brand new 2023, Can-Am outlander max 850 I go riding with my neighbor that has a side-by-side and I’d rather be on the four wheeler, I see more people get hurt on the side by sides by rolling them than anybody does on a four wheeler hang in there good time are coming you’ll be out there tearing up the trails in no time
Low gear is made to go slow lol... if you want to go fast then go hi gear.. you are suppose to use low gear only on big hills or when uploading in your trailer.. otherwise keep that thing on hi and send it
Thanks for the advise was just use to my brute force it’s low gear you could go 45mph on I usually keep it in low on the trails