what an excellent job. you are clear and precise on what you are doing and what needs to be done. i certainly enjoyed it when you said 'lets test just the top bolt first' on loosening the alternator. great camera work too, i could see everything to did clearly. thanks for taking the time to do this video.
My BX23s fan belt is starting to squeal and this video solved it with a simple adjustment to the tension. God forbid I have to replace that belt any time soon! Thanks!
I found this quite helpful, but I had my front end loader on, which made it hard for me to get in from the side like you did. So I raised the tractor up with the loaded and loosened those bolts from underneath. Took awhile, but everything came together, and I saved money in the process. Thanks for the tips.
Clear and right to the point, very good demonstration video. Hoping to get the new belt installed at a remote cabin site this summer. Thank you from Alaska!
Thanks for a very helpful video! I ended up just loosening the alternator bolts and adjusting the alternator to make the belt tighter. Hopefully that will work out for a while. So far. So good.
Great job and great video !!!! You save a lots of money by doing it by yourself !!! and it is a great way to learn and inspect and by proactive on maintenance for your investment !!! Keep up the good work Cheers !!!
Thanks Shel! Only had 270 hours on it. Seems very low to me. Maybe the belt was defective? We'll see how this gates belt holds up! Thanks for watching!
Haha not a bad idea at all bud! to be honest i wouldn't have thought the oem one would have went after only 300hrs. Maybe it was defective? Kind of makes me not so upset that I got a gates belt after all. Have a good one
@@Tyler_Koehn All companies out source parts and I am sure their is a better belt them O E M. I work with belts on motors up to 150Hp and I have seen belts last days versus months only difference manufacturer belt ratings the same.
Nice job, the real question is why would Kubota make something as simple as replacing a fan belt so hard. An electric fan would work well and so much easier to work on. Electric fans have been proven to be very reliable and cost effective.
Well, got the belt on but it turns out the bearing on the alternator is seized, which explains why the damn thing broke in the first place. Time for a new alternator too lol. Folks, make sure you check that too haha
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Thanks for watching! Link to the Gates 7350 belt in video description! Please Subscribe
You the man, made it an easy job without having to disassemble everything. Thank you !!!
what an excellent job. you are clear and precise on what you are doing and what needs to be done. i certainly enjoyed it when you said 'lets test just the top bolt first' on loosening the alternator.
great camera work too, i could see everything to did clearly.
thanks for taking the time to do this video.
Hey! I really appreciate the nice comment! Thanks for taking the time to write it!
My BX23s fan belt is starting to squeal and this video solved it with a simple adjustment to the tension. God forbid I have to replace that belt any time soon! Thanks!
@@wileymarm0t glad it helped! Thanks for the comment!
Mine is squealing. Thanks for the tip. Hope it’s just the tension.
I found this quite helpful, but I had my front end loader on, which made it hard for me to get in from the side like you did. So I raised the tractor up with the loaded and loosened those bolts from underneath. Took awhile, but everything came together, and I saved money in the process. Thanks for the tips.
No problem! I'm glad it worked out for you! I appreciate the comment.
Clear and right to the point, very good demonstration video. Hoping to get the new belt installed at a remote cabin site this summer. Thank you from Alaska!
Glad it helped! I appreciate the comment!
Thanks for a very helpful video! I ended up just loosening the alternator bolts and adjusting the alternator to make the belt tighter. Hopefully that will work out for a while. So far. So good.
@bambi2814 Your welcome! Fingers crossed for you
Thanks so much! I have a B1700 and this was perfect!🥰Female and fixin' to be 70 in a few weeks.
Your welcome Diane! Happy early Birthday!
@@Tyler_Koehn Thank You!😊
This Is the Best Bx series belt change video! I'll be going for my belt in the morning. Thank You.
Your welcome! I appreciate the feedback!
Nice job Tyler! I like the way you walked us through the steps! Have a good one!
Thanks for watching bud! Hope your thanksgiving was good!
Just what I needed to know. Thanks for sharing.
Your welcome thanks for taking the time to comment!
You saved my bacon and a load of money. THANK YOU.
Glad it helped! Thanks for the comment! A number of other bx videos on my channel should you want to check them out and subscribe!
Great job and great video !!!! You save a lots of money by doing it by yourself !!! and it is a great way to learn and inspect and by proactive on maintenance for your investment !!! Keep up the good work Cheers !!!
Absolutely! I agree 100% bud. Thanks for watching!
Good detail instruction; thanks for posting.
@@AStanton1966 your welcome. Theres other bx videos on my channel should you want to check them out. Thanks for the comment.
@@Tyler_Koehn I just did the 600 hour service on my BX-25 yesterday--I still recovering!
Thanks for making this video, it helped me out 👍
Your welcome Donal! Thanks for taking the time to comment!
Very good video how many hours did the factory belt last?
Thanks Shel! Only had 270 hours on it. Seems very low to me. Maybe the belt was defective? We'll see how this gates belt holds up! Thanks for watching!
mine showed just over 300 hours before it let go. Have found a few OEM parts to have short lives on the Kubota so far unfortunately.
Thanks for the share Mr. Tyler
No problem Patrick! Hope it helps. Have a bunch of other bx vids if your interested in subscribing!
Tyler, do you feel like that was the right belt for the job now that its been there for a while?
@Disaster1971 it's still on there:)
That's what I'll order then!
@@Disaster1971 good deal!
Another great video, thank you!
Your welcome! Thanks for watching!
I think I'll order a oem belt and put it on the shelf so when mine breaks on a Sunday..lol
Haha not a bad idea at all bud! to be honest i wouldn't have thought the oem one would have went after only 300hrs. Maybe it was defective? Kind of makes me not so upset that I got a gates belt after all. Have a good one
@@Tyler_Koehn All companies out source parts and I am sure their is a better belt them O E M. I work with belts on motors up to 150Hp and I have seen belts last days versus months only difference manufacturer belt ratings the same.
Nice job, the real question is why would Kubota make something as simple as replacing a fan belt so hard. An electric fan would work well and so much easier to work on. Electric fans have been proven to be very reliable and cost effective.
Thank you! I agree with you Dave!
it drives the water pump and altenator as well
@@Technical5tuff It should never go around the drive shaft the way it does. That is just poor engineering.
What size belt did you install?
There's a link to the belt in the video description.
You and I could be twin brothers!
haha too funny
Nice job!👍
Thanks for watching and commenting James!
Good video, thanks!
Thanks for watching James! Lots of other bx videos on my channel should you want to check them out and subscribe!
Nice video.
Thanks Teddy!
You and I can be twin brothers
Well, got the belt on but it turns out the bearing on the alternator is seized, which explains why the damn thing broke in the first place. Time for a new alternator too lol. Folks, make sure you check that too haha
Oh no! Glad you got it figured out before another belt was toast! Thanks for sharing the info!
Man I wish the fuel filter on my bx2200 wasn't right in the f'ing way
Haha yea I could see that being a issue!