I've found that on the UCD180HG version the issue is the P1F (NPN SOT223 PKG) for no audio / Also check or replace the 220uF / 16v cap as it can tend to go soft
Thanks for this video! In a speaker with 3 UCD180LP one starts working only after being powered for ~ one hour (sometimes...). Then it keeps working for days until I switch power off for some hours. What could it be? Thanks!
Buen video, al cambiar los mosfets nunca hubo que cambiar algun transistorcito, resistencia, diodito ó IC ? Por cierto donde conseguiste los mosfets que veo alguien escribio solo aparecen copias chinas y quizas por esi recalienta más, es por eso recomientas bajar un poco el potenciimetro para bajar el Bias ?
Hello I have several hypex like that. One of them put my fbt speaker in '' protect''. I try to Interchange mosfet, noting change. R050, same. Condensator seem to have there good capacity after a simple multimeter measure. I' m stuck. What can i do ?
Hi, I have tried to replace the transistors with a model p14nf12fp, but it does not work. Do you think it is because they are p14nf12fp and not p14nf12p? Thanks!
the transistor you mentioned can be used. try to check Resistor R050 is often damaged. if it still doesn't work, adjust the variable resistor slightly to the right.
Hi I have a number of these boards(ucd180lp oem). I tested its resistance, it is healthy MOSFETs is also healthy But it does not work again There are a number of six-piece components on the board. What are these components and may there be a problem with them?
hello friend, I changed the transistors the same as in the video, it works well but it gets hotter than the original, what could be the cause? Thank you so much.
I have been buying replacement hypex ucd180lp and it’s not cheap. Thank you for your video hope I can start repair the amplifier class D myself. Any link where to buy the replacement P14NF12 ? Found some on AliExpress but the below numbers are different.
I've found that on the UCD180HG version the issue is the P1F (NPN SOT223 PKG) for no audio / Also check or replace the 220uF / 16v cap as it can tend to go soft
Thanks for this video! In a speaker with 3 UCD180LP one starts working only after being powered for ~ one hour (sometimes...). Then it keeps working for days until I switch power off for some hours. What could it be? Thanks!
I have had to replace numerous mosfets on these boards.
On one repair that I had, the problem was C18: 220uf/ 16 v electrolytic capacitor.
Excelent Great video !
Is the trimmer for deadtime or what?
Buen video, al cambiar los mosfets nunca hubo que cambiar algun transistorcito, resistencia, diodito ó IC ?
Por cierto donde conseguiste los mosfets que veo alguien escribio solo aparecen copias chinas y quizas por esi recalienta más, es por eso recomientas bajar un poco el potenciimetro para bajar el Bias ?
Hello
I have several hypex like that. One of them put my fbt speaker in '' protect''. I try to Interchange mosfet, noting change. R050, same. Condensator seem to have there good capacity after a simple multimeter measure. I' m stuck. What can i do ?
Hello. I have 6 boards bad can i ship to you and how much would you charge to repair and send back? Please help. Thanks.
Still have bad boards?
mosfet and r050 are still good but no sound what should i do
Hi, I have tried to replace the transistors with a model p14nf12fp, but it does not work. Do you think it is because they are p14nf12fp and not p14nf12p? Thanks!
the transistor you mentioned can be used. try to check Resistor R050 is often damaged. if it still doesn't work, adjust the variable resistor slightly to the right.
Thanks for your video. I tried to desolder the transistor but I failed. Any suggestion on desoldering the existing transistor please
@@eshwoorgrghk I'll make a video tutorial later.
@@eshwoorgrghk ruclips.net/video/s_SlJXfjz80/видео.html
Hi
I have a number of these boards(ucd180lp oem).
I tested its resistance, it is healthy
MOSFETs is also healthy
But it does not work again
There are a number of six-piece components on the board. What are these components and may there be a problem with them?
Did you find the problem ?
hello friend, I changed the transistors the same as in the video, it works well but it gets hotter than the original, what could be the cause? Thank you so much.
Quizas compraste mosfets copias chinas en Ebay y veo Mouser no los tiene porque este mosfet fue declarado obsoleto
Great video! Whats is the functionality of the variable resistor?
I don't have a schematic diagram, maybe as a bias voltage
The pot is adjusted so that the current in the positive supply rail is about 28-30 mA in idle.
@@ВалерійБлощинський do you have a schematic for this module?
Would you have one available for sale?
Bang ada stok y ucd 180Lp?
این قطعه رو از کجا تهیه کنم
What model speakers and amplifiers do these come in?
EV ELX series and D.A.S
I have been buying replacement hypex ucd180lp and it’s not cheap. Thank you for your video hope I can start repair the amplifier class D myself. Any link where to buy the replacement P14NF12 ? Found some on AliExpress but the below numbers are different.
@@eshwoorgrghk donde consigues los MOSFET para él módulo ucd 180lp
berapa harga ?
san nakaka avail nyan sir?
San po location niyo?
Punya stok mosfet ya? Kalau ada minta no wa