Let us see what kind of damage we can do with these 6mm aluminium bb's and how accurate they are. in this video i try out these bb's on a car • Can airsoft break a ca...
I have been reusing my alu bbs over years, but with < 0,5 Joule Spring or AEG guns. But might also have worn down the very cheap plastic things, cause some only hold now those alu bbs, if i put in "good" plastic bbs, they sometimes fall out of the barrel when cocking. But i heard it should be okay if you have a soft place to catch your bbs and just shoot paper (but maybe want to wash them, and better still only reuse in crap guns you do not care about). They look so pretty, i do not want to throw them away... well also, i am one of of those that also reshoots plastic bbs if they do not shatter from time to time. Biggest problem on my now 20 years or so old Airsofts: All the Cast Metal parts start to just break, the 100% plastic did hold up better over the years.
I have heard not to use 6mm steel bbs in airsoft guns because most of them have brass inner barrels. My 4.5mm bb pistol that is made to shoot steel bbs came with a brass barrel, will the inner barrel be destroyed? I have noticed that most blow back 4.5mm bb pistols come with brass inner barrels instead of steel.
@@HappyDude1 I have been thinking that plastic BBs are too light and not strong enough, while steel BBs are too heavy. It wasn't until I saw your video that I suddenly realized that aluminum BBs can be used. This is a perfect and balanced choice for me. 👍
@@lessmeaning9776I guessed that was the problem before reading your comment because I had the same problem before finding out about aluminium BB's. I've just ordered some to try them out.
If most gbb pistols have 400 fps and they allows 3 mag dumps before refilling the gas, can I maximize the fps 3x if I make the hole big enough to release enough gas every shot where its used up by the end of the first mag? I'm trying to create a 6mm gbb that has at least 1000 fps for self defense its going to change the world. And of course I want to use aluminum or steel bbs. U said they damage the barrels but isn't their high quality steel barrels that last. I'd highly appreciate your help its seems as if everyone in this airsoft community is scared to answer this question. Either way ima do this with or without u guys, become financially wealthy off this with or without u guys. I'm tired of u scared dudes your missing out on a billion dollar opportunity. A 100 million Americans will soon have their firearms taken away, and will need to replace it with something similar or equivalent. Who ever answers my question im going to bring them with me and turn them into a very wealthy man. I'm serious
@HappyDude1 we already got a AEG to 1100 and black gas is more powerful which will allow to surpass 1100. I just wanted to see if actually knowledgeable on this but your not. Your jealous you can't be apart of this goofy. I'm exposing this airsoft community as a bunch of incell little nerds. Theres gbbs coming at 750 fps out the box, barrel swap larger gas release brings it to a 1000. U obviously know nothing. If u would have answered correctly u could have had a chance of getting wealthy. Good luck is typically the response from someone who will never be financially rich in life. Your soft like the plastic bbs u use.
@HappyDude1 no vid for you, people like you will never get to experience this even through your phone, your a goofy nerd. Go play with you plastic toys, little kid
So i tried these aluminum bb's on a car window 😁
ruclips.net/video/A0dQjvAfEiY/видео.html
Great content this is exactly what I was looking for
Have a lovely stay 😀
I have been reusing my alu bbs over years, but with < 0,5 Joule Spring or AEG guns. But might also have worn down the very cheap plastic things, cause some only hold now those alu bbs, if i put in "good" plastic bbs, they sometimes fall out of the barrel when cocking. But i heard it should be okay if you have a soft place to catch your bbs and just shoot paper (but maybe want to wash them, and better still only reuse in crap guns you do not care about).
They look so pretty, i do not want to throw them away... well also, i am one of of those that also reshoots plastic bbs if they do not shatter from time to time. Biggest problem on my now 20 years or so old Airsofts: All the Cast Metal parts start to just break, the 100% plastic did hold up better over the years.
Thanks for the input 😀
I never reuse bbs they are so cheap and Guns are to expensive
@@HappyDude1 What is the benefit of the red and green tube and how is it used?
@@HappyDude1 Is this tube a replacement for the small one?
@@sonGoku-dt2if
Watch my video
Green gas vs red gas vs co2 🙂
@@HappyDude1 Send me the video link
I have heard not to use 6mm steel bbs in airsoft guns because most of them have brass inner barrels. My 4.5mm bb pistol that is made to shoot steel bbs came with a brass barrel, will the inner barrel be destroyed? I have noticed that most blow back 4.5mm bb pistols come with brass inner barrels instead of steel.
Everything wears out over time
Barrels dont cost that much 😋
its not going to be “destroyed” maybe just a scuff or scratch
Brass is much harder than Aluminium, just don't use steel, copper is softer than Brass but Aluminium is the softest.
@@Seabass1206You again? That is damage, dummy!😢
I put my 20g in the freezer and they are harder than the metal but I have metal rounds to
You mean 0.20 i gues
Do you think alu bbs will damage even a steel barrel overtime?
Over time if you shoot a lot yes. You know for sure when you try it 😁 a barrel is very cheap to replace
i wouldn’t say damage but maybe scuff and scratch
@@Seabass1206Scuff and scratch= damage, in the real world...😮
No, no it won't
you should try full metal replicas with a tightbore 6.01mm inner barrel and use niprol black gas
im sure youll have fun
I Already did that
great! Very good test. It solves the problem I've been thinking about
Whats the problem ? 😀
@@HappyDude1 I have been thinking that plastic BBs are too light and not strong enough, while steel BBs are too heavy. It wasn't until I saw your video that I suddenly realized that aluminum BBs can be used. This is a perfect and balanced choice for me.
👍
@@lessmeaning9776I guessed that was the problem before reading your comment because I had the same problem before finding out about aluminium BB's. I've just ordered some to try them out.
Can you reuse
Aloy bbs doesnt dmg the unit?
Where can i buy alluminum bbs?
@@skybear51
Amazon
What is the guns exact model you're using?
wich one in the video?
Waar heb je de allu bb gekocht? Op shogun??
@@tuurvanhoof4293
I think so yes
You should refill the air each time you test a different bb
How many joul has that deasert eagle?
It depends on the gas that you are using the temperature. And the weight of the bb
@@HappyDude1 oh okay thank you 🙌
@@KristijanLaus
But airsoft is always between 0.5 and 2j
That was excellent
Thank you good sir
궁금했는데. 실험 고마워요.
Yes
Yeah I collect them I have all the 177 glocks
Boy I tell you this and I'm done get a spring rifle with 350fps or higher %
Eum my revolvers have around 500 fps 350 is very low
Yeah but you need co2 all the time with spring guns you cock and shot
пластиковыми шариками я разбивал такую же банку!!!
What gun did you use?
If most gbb pistols have 400 fps and they allows 3 mag dumps before refilling the gas, can I maximize the fps 3x if I make the hole big enough to release enough gas every shot where its used up by the end of the first mag? I'm trying to create a 6mm gbb that has at least 1000 fps for self defense its going to change the world. And of course I want to use aluminum or steel bbs. U said they damage the barrels but isn't their high quality steel barrels that last. I'd highly appreciate your help its seems as if everyone in this airsoft community is scared to answer this question. Either way ima do this with or without u guys, become financially wealthy off this with or without u guys. I'm tired of u scared dudes your missing out on a billion dollar opportunity. A 100 million Americans will soon have their firearms taken away, and will need to replace it with something similar or equivalent. Who ever answers my question im going to bring them with me and turn them into a very wealthy man. I'm serious
@@cbnk8
A 1000 fps will never work
But good luck trying 😁
@HappyDude1 we already got a AEG to 1100 and black gas is more powerful which will allow to surpass 1100. I just wanted to see if actually knowledgeable on this but your not. Your jealous you can't be apart of this goofy. I'm exposing this airsoft community as a bunch of incell little nerds. Theres gbbs coming at 750 fps out the box, barrel swap larger gas release brings it to a 1000. U obviously know nothing. If u would have answered correctly u could have had a chance of getting wealthy. Good luck is typically the response from someone who will never be financially rich in life. Your soft like the plastic bbs u use.
@HappyDude1 we already got it to work goofy.
@cbnk8
Ok lets see the video
Without editing
@HappyDude1 no vid for you, people like you will never get to experience this even through your phone, your a goofy nerd. Go play with you plastic toys, little kid