Well equipped motherboard with lots of features for the money. And a video full of important and useful information. Multiple viewing suggested ! Well done !
Thank you for this video! You're the only person with a similar build as mine, The Motherboard and Ram. I'm glad to see it's running at 6000 with two sticks! I was worried it would be stuck at 5400. Great build as well!
Thank you i happened across this before my install and watched it even tho i've been A+ certified before lol. The note about ram was key. I had 4 sticks in and even after a fresh windows install was still getting BSOD. But the BSOD that came up after the full windows reinstall was memory management. I was lost since it was 2 new in box sticks and 2 known working sticks from a day prior all same frequency etc. Remembered this video and pulled two out, so far it's been stable since.
@@TheProvokedPrawn Unfortunately I tried that and it didn't help. Admittedly I have 2 diff brands of RAM but the same specs from what I can tell, so it's possible that's part of the problem. I also have the DDR4 version of the board, so it's possible that has it's own issues yet. But it's been stable 2 days now, versus the 2-3 hours from day 1.
@@bluej511 those little lights are the most anxiety inducing part of building. Especially the system check ones. Urgh. And people complain about front panel connectors.
@@TheProvokedPrawn This was such a great help to me. Built my own from scratch for the first time the other day and it worked on boot. Really chuffed. Thanks again!
Hey Prawn when you were showing the Fan Info I noticed that Smart Fan Mode was checked. Is this the recommended setting? I noticed that mine is not checked. Thx and this is just a great vid talking about this board. Thx for doing it!
Great video! Very insightful. Just purchased this mobo. The only thing I can’t wrap my head around is the first m.2 slot supports 2242/2260/2280 and 22110. The first two numbers on the nvme represent the width, the rest is the length. With the m.2 lock thing on the mobo being static, how can this slot support such differences in length? Too short and the nvme wouldn’t reach the catch(lock thing).
It’s ironic I come across this video as I’m building my rig with this exact board and I’ve been watching your Kraken Elite video again, for setup. For some reason, my IO panel at the top left looks kinda “off” and isn’t firm as the rest of the IO panel. Should I be worried?
I got this motherboard with a i5 14600kf and 2 ddr5 Corsair dominator platinum rgb cards with 7200mhz. The gamemode from bios is great! I5 performs on 5.4 ghz and 1 of the ram on even 7400mhz instead of 7200 mhz.
You update the bios with USB stick with latest firmware, you need the motherboard connected to the power suppply only, nothing else in the motherboard. Connect usb, press the bios button behind the motherboard and let it update
Great video as always! I can't believe they haven't fixed the DDR 5 4 stick of RAM issue. When will they fix that issue with these motherboards?! I was pretty shocked to see that on my MSI Z790 board...
Well ddr5 speed on quad channel is controlled by your cpu's memory controller. As of now, most consumer cpus cant handle 4 sticks of ddr5 above 6000mhz or so. You might have to wait for new cpus to be released
You said "more about this ram issue later" in the video, TWICE but then never addressed it. I watched the whole video 3 times just now haha. So am I just stuck with an extra 2 sticks of corsair vengeance rgb ddr5 6000MHz 16gb each? That's lame. Newegg said it would work. PLEASE HELP!!! Like you said you were going to discuss in your video haha. 😢😮
Thank you for the video! It was really informativ and helpful. Your recommended tests with the intel software acutally helped me to figure out a thermal issue with the CPU. And I was able to fix it, by down volting the CPU a bit (by 0.05A). Plus, I added 1 more fan in my PC case at the top, just to be safe. Now everything runs smooth :) You recommended to turn on the "CPU boost" - why? What is the actual effect? Tried to find some information in the internet about details to this functionality, but without success. I'am worried about overclocking the CPU to much and reducing the overall lifetime of my CPU. In addition to that, I already had that thermal issue... ^^
Great video, how ever. I cannot install windows 11 cuz I have no internet connection. (Ethernet cable is plugged in) windows is requiring me to have internet for the installation. I’m now trying to update bios because I downloaded the new update and did as you showed in the video. it was not as ez for me for i did not find the usb stick when i was in bios. so restarted the pc, in bios again and when i pressed the usb flush button my pc rebooted and now my screen, mouse and keyboard is black. help! 😢
Looking to get this board with the 14700 and wonder if the bios can be updated after windows install or can it be done before attempting to install windows as you said it would need doing to recognise the 14th gen chip. Thanks
If the board doesnt recognize the 14th gen intel you cant install windows because it wont boot. Most sellers of the motherboard include an option to update the bios before you get it.
When you installed the CPU, did the metal plate sit flat over the CPU before you pulled the lever down? Or did the metal plate sit slightly raised until you lowered the lever?. I did a flash bios with mine, to support the Intel 14th gen. I just installed my intel i7 14th gen 14700kf the metal plate was slightly raised and I had to pull the lever down to close it and lock the lever down.
@@TheProvokedPrawn couldn't tell. I'm about to upgrade my MB/CPU/RAM in my build after 10+ years (Using 1155 socket still) and noticed a lot of the DDR5 issues are about using only 2 sticks vs. 4 sticks. If it is so bad, why even have 4 slots in the MB? I like having 4 slots. Currently use 4 x 4GB in my machine.
So I just got the 790 tomohawk and when it boots up none of my user files are there for me to log into, it’s just stuck on the “other user” screen and I cant log In. Not sure what to do
@ yes to all three. I have Corsair cmh32gx5m2e6000c36 in slot A2 and B2 with updated mobo BIOS. I am currently running a i7-14700K. PC ram runs fine when used on 4800mhz but as soon as I try to tweak or enable XMP I get nothing
im having problems when i upgraded to this exact set up, same motherboard, same cpu and g skill trident 2x16gig ram. Games and applications are crashing randomly and the occasional blue screen. updated bios, pretty sure i updated all drivers, idk what else to try. did some research, people are saying faulty ssd? it is 2 years old
If you've got 12th gen CPU then you shouldn't have this problem but it might be worth updating your bios anyway ruclips.net/video/MPgKTIJsKb4/видео.html
@@TheProvokedPrawn yeah i have a 12th gen, ended up changing some of these settings and not getting bsod, got 1 crash in a game but have yet to test other games, thanks!
Did the board come pre installed with bios support for 14th gen? I bought mine 3 weeks ago and having major issues to flash but since I cannot post I don't know if it's a CPU compatibility issue or something else
If you have an AIO cooling system, do you plug it into the spot on the motherboard that says “pump fan” or the spot that says “CPU fan?” Ps. (I haven’t booted the system yet but) I guessed I should plug into the CPU fan spot then started having second thoughts about that. Am I wrong or does it even make a difference? The downloaded manual is thin on info and doesn’t explain much.
i just build my first my with this motherboard ans when i plug my hdmi cable in the graphics card or the MB my monitor just wont work, i tried to unplug my graphics card and reboot my pc and now my monitor work, i installed the latest bios update ans tried to plug my graphics card back but it still doesnt work, can anyone help me out?
mannn I am shitting myself gonna build my first pc soon only part I’m really worried about is connecting everything on the board and cable managing in general
thanks man, will be looking at a few of the videos once i have all my stuff ready for the build. wish me luck ill be using the same board in this video@@TheProvokedPrawn
Thanks for the video! I am having an issue with the computer turning on but it has a yellow light on the motherboard. Nothing is booting (HDMI or DP or USB ports etc) Any tips or ideas? Thanks so much
Will I be able to use this mobo with 10 Lian li Infinity fans? I noticed it only has 1 rgb connector. Is that enough ?. I’m running 3 of them on a kraken 360 elite.
HI, I installed this motherboard in a new build about a month ago and the only limits I saw that were not addressed in the video were it only contains 4 sata ports, I'd have preferred more.
Where did you plug in the AIO pump cable? I tried both pump_fan header and cpu header and both times it shows in bios that it has 0 rpm ... but the c[u is about 30 degrees, so the pump works
Damn... I have an MSI Z77 mpower with the same damn issues and I actually hate it for being such a buggy mess. I am waiting for this z790 to arrive and I am kinda disappointed I will have to deal with the same shity issues and a buggy mess of a motherboard. Why are they still present after over 10 years???
PC Builder Reply hello can you help me out built new pc but i cant get buy the windows connecct to internet i have tried shift f10 but i cant type in the cmd box keyboard not responding how can i get it working and how can i update the drivers for the wiffi or lan off the msi website i have them but can you install them from the bios screen PC Builder Reply
Do most of these newer motherboards already have the TPM switch and UEFI settings already activated so all you have to do is insert the Windows 11 USB install?
You should upgrade your water cooling system with downside air-flow to take the heat of VRM out... I don't like the water cooling system because of its risk and low reliability.....
Well equipped motherboard with lots of features for the money. And a video full of important and useful information. Multiple viewing suggested ! Well done !
Bro single-handedly solved every issue I had in one vidoe
Glad to help
Thank you for this video!
You're the only person with a similar build as mine, The Motherboard and Ram. I'm glad to see it's running at 6000 with two sticks! I was worried it would be stuck at 5400.
Great build as well!
Finally found you buddy , true guy with technology skills
Wouldn't go that far. Just someone sharing what he knows
Great video, extremely helpful for my future buy. Was already wondering how the M.2 slot worked, but you showed it perfectly.
Thanks!
Glad it helped! Hope you enjoyed enough to subscribe 🦐
Thank you i happened across this before my install and watched it even tho i've been A+ certified before lol. The note about ram was key. I had 4 sticks in and even after a fresh windows install was still getting BSOD. But the BSOD that came up after the full windows reinstall was memory management. I was lost since it was 2 new in box sticks and 2 known working sticks from a day prior all same frequency etc. Remembered this video and pulled two out, so far it's been stable since.
BIOS updates often help
@@TheProvokedPrawn Unfortunately I tried that and it didn't help. Admittedly I have 2 diff brands of RAM but the same specs from what I can tell, so it's possible that's part of the problem. I also have the DDR4 version of the board, so it's possible that has it's own issues yet. But it's been stable 2 days now, versus the 2-3 hours from day 1.
Thank you so much, was having issues with finding the WiFi installer
Glad to help
look at those thick vrm sections 👀
vermiş oldugunuz bilgilerden dolayı teşekkür ederim hocam
Thanks for watching!
Great work as always, but I will say, if your motherboard has bios flashback, as they all should, it's much safer to update bios that way.
Interesting. I like seeing it happening so I can be sure there's no problems. Thanks for sharing and for watching 👍 appreciate your support
@@TheProvokedPrawnI watch the little LED blink lol. I updated my x570 proart with it just using the 24pin. I know it wouldn't boot otherwise.
@@bluej511 those little lights are the most anxiety inducing part of building. Especially the system check ones. Urgh. And people complain about front panel connectors.
How do I use bios flashback
@@TheProvokedPrawn as long as it's flashing it's working. I know my mobo wouldn't boot with my 5800x3d so had to use flashback
Sir, thank you this video and explain everything about motherboard.. I like this MB...
Can you make a review on msi mpg edge z790 gaming wifi motherboard?
If MSI sends me one
Would this motherboard work good with i9 13900k cpu?
Yes
Works great with my i9 12900k
Works really well with my i9 13900k
Thank you kind sir for this video
Thanks for watching
Nice video ;) Mr. You sound like Micolash, Host of the Nightmare from Bloodborne ;))
Subbed. An excellent resource. Cheers!
Thanks. Here's a playlist you might find useful too - How to build a gaming PC: ruclips.net/p/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@@TheProvokedPrawn This was such a great help to me. Built my own from scratch for the first time the other day and it worked on boot. Really chuffed. Thanks again!
@@JM-ql7mh excellent news. Enjoy!
Can you do a review on the MSI MPG Z790 EDGE WIFI?
Hey Prawn when you were showing the Fan Info I noticed that Smart Fan Mode was checked. Is this the recommended setting? I noticed that mine is not checked. Thx and this is just a great vid talking about this board. Thx for doing it!
Great informative video. Just curious about the CPU heatsink that you used. If you don't mind sharing the information please. Thanks in advance.
Specs of the build are in the description 👍
Great video! Very insightful. Just purchased this mobo. The only thing I can’t wrap my head around is the first m.2 slot supports 2242/2260/2280 and 22110. The first two numbers on the nvme represent the width, the rest is the length. With the m.2 lock thing on the mobo being static, how can this slot support such differences in length? Too short and the nvme wouldn’t reach the catch(lock thing).
Glorious time stamps ✊️
It’s ironic I come across this video as I’m building my rig with this exact board and I’ve been watching your Kraken Elite video again, for setup. For some reason, my IO panel at the top left looks kinda “off” and isn’t firm as the rest of the IO panel. Should I be worried?
I got this motherboard with a i5 14600kf and 2 ddr5 Corsair dominator platinum rgb cards with 7200mhz.
The gamemode from bios is great! I5 performs on 5.4 ghz and 1 of the ram on even 7400mhz instead of 7200 mhz.
Nice
Did you need to update the bios?
Thanks to your video i build my pc with i9 14900k the bios flaah went smooth
Excellent 👍🏼
Do you update bios with 14th gen CPU already installed or you update the bios first with previous gen CPU and then install new CPU?
You update the bios with USB stick with latest firmware, you need the motherboard connected to the power suppply only, nothing else in the motherboard. Connect usb, press the bios button behind the motherboard and let it update
Hi, great video! im thinking about buying this motherboard for my new build. But how do you get all four sticks of ram to work ?
Make sure the ram is on the QVL list. Update the bios.
@@TheProvokedPrawn Ah! okay thank you :)
Nice review. Thank u!
It's possible to change the light of the dragon (io shield)?
Great video as always! I can't believe they haven't fixed the DDR 5 4 stick of RAM issue. When will they fix that issue with these motherboards?! I was pretty shocked to see that on my MSI Z790 board...
Well ddr5 speed on quad channel is controlled by your cpu's memory controller. As of now, most consumer cpus cant handle 4 sticks of ddr5 above 6000mhz or so. You might have to wait for new cpus to be released
I actually have a feeling that one stick is faulty but I need to find some time to test it.
just lower your ram speed to a speed lower than 6000, try them all, from high to lower, one will work with your 4 sticks, cheers
You said "more about this ram issue later" in the video, TWICE but then never addressed it. I watched the whole video 3 times just now haha. So am I just stuck with an extra 2 sticks of corsair vengeance rgb ddr5 6000MHz 16gb each? That's lame. Newegg said it would work. PLEASE HELP!!! Like you said you were going to discuss in your video haha. 😢😮
Perfect video, but if I need to update bios without a CPU, do they have the bios flash light for checking if bios is updating or finished?
Did you find out?
Thank you for the video! It was really informativ and helpful.
Your recommended tests with the intel software acutally helped me to figure out a thermal issue with the CPU. And I was able to fix it, by down volting the CPU a bit (by 0.05A). Plus, I added 1 more fan in my PC case at the top, just to be safe.
Now everything runs smooth :)
You recommended to turn on the "CPU boost" - why? What is the actual effect?
Tried to find some information in the internet about details to this functionality, but without success.
I'am worried about overclocking the CPU to much and reducing the overall lifetime of my CPU. In addition to that, I already had that thermal issue... ^^
Great video, how ever. I cannot install windows 11 cuz I have no internet connection. (Ethernet cable is plugged in) windows is requiring me to have internet for the installation. I’m now trying to update bios because I downloaded the new update and did as you showed in the video. it was not as ez for me for i did not find the usb stick when i was in bios. so restarted the pc, in bios again and when i pressed the usb flush button my pc rebooted and now my screen, mouse and keyboard is black. help! 😢
Looking to get this board with the 14700 and wonder if the bios can be updated after windows install or can it be done before attempting to install windows as you said it would need doing to recognise the 14th gen chip. Thanks
If the board doesnt recognize the 14th gen intel you cant install windows because it wont boot. Most sellers of the motherboard include an option to update the bios before you get it.
where is the aio pump on pro z790-p wifi ddr4 in the motherboard? can u show me picture ?
Did you try 4 sticks of ram after the bios update?
Hi,what vesion of this motherboard is best for gaming? how I understand MSI Pro Z790-A WIFI it should be? cool video
Should I buy it for my new pc?
Kingston KF560C40BB-16 is working in 4 dimm sticks 16gb on 12gen non k series cpu
Also, which mobo would be better MSI Z790 GAMING PLUS WIFI or MSI Z790 GAMING PRO WIFI ?
tried running the bios update and after rebooting it just hangs on a black screen, anything i could have done wrong?
When you installed the CPU, did the metal plate sit flat over the CPU before you pulled the lever down? Or did the metal plate sit slightly raised until you lowered the lever?.
I did a flash bios with mine, to support the Intel 14th gen.
I just installed my intel i7 14th gen 14700kf the metal plate was slightly raised and I had to pull the lever down to close it and lock the lever down.
Did you have any issues with cpu degradation or random crashes like a lot of other 13 or 14 gen intel owners had?
Not specifically with this board. Bios updates will help.
Hey I ordered the intel i5 14600k with this motherboard
My motherboard is msi b760
Would you choose this or the Tomahawk or the MSI PRO Z790-A (like £20 in the difference where I am).
Is there a fix for 2 of the 4 RAM slots not working?
Bios update?
@@TheProvokedPrawn couldn't tell. I'm about to upgrade my MB/CPU/RAM in my build after 10+ years (Using 1155 socket still) and noticed a lot of the DDR5 issues are about using only 2 sticks vs. 4 sticks. If it is so bad, why even have 4 slots in the MB? I like having 4 slots. Currently use 4 x 4GB in my machine.
So I just got the 790 tomohawk and when it boots up none of my user files are there for me to log into, it’s just stuck on the “other user” screen and I cant log In. Not sure what to do
I need help.. i have this Motherboeard but i can't connect the cpu cable to the socket of the power cpu.
It's like they don't match..
How did you get Windows installed? Mine keeps freezing on the Windows setup screen.
Very informative thank you. Do you need to connect both of the 8 pin power connectors in the top left of the board?
You should yes
so wuold you recommen that board? I'm having hard time deciding which one to choose for my i5 13500 kf
does the 1st NVME SSD have an impact on the PCIE lanes that the grapics card is using?
Did you have any issues enabling XMP on this mobo? I have 6000mhz ddr5 ram but it’s set at 4800mhz. When I do enable XMP my system doesn’t post
Three things. Have you got your ram in slots A2 and B2? Is your ram on the QVL ram list? Have you tried updating the bios?
@ yes to all three. I have Corsair cmh32gx5m2e6000c36 in slot A2 and B2 with updated mobo BIOS. I am currently running a i7-14700K. PC ram runs fine when used on 4800mhz but as soon as I try to tweak or enable XMP I get nothing
@LaoBoiClique hmm. Not ideal. My other suggestion is try using Memtest86 to see if one of the sticks is defective
@@TheProvokedPrawn I will definitely try that. You wouldn't happen to have a video for memtest86 or know of a good video would you?
I'm confuse my screen is Black abd wite then i don't know i have all power from my gpu all îs default i913900k 4090 gpu
hi, i have 2pin LED connector from Case, bur i didn't find the connector on motherboard.
I got the MPG Z790 EDGE WIFI mother board with the CORSAIR ICUE H150i ELITE LCD XT. Are they compatible?
Sir please i really wanna know cuz i am soo confused that it can fit i7 13 and 14gb processor plesee i really wanna know
Does this motherboard support Window 10 on a SATA hard drive? The bios sees the drive, but won't boot to Windows.
im having problems when i upgraded to this exact set up, same motherboard, same cpu and g skill trident 2x16gig ram. Games and applications are crashing randomly and the occasional blue screen. updated bios, pretty sure i updated all drivers, idk what else to try. did some research, people are saying faulty ssd? it is 2 years old
If you've got 12th gen CPU then you shouldn't have this problem but it might be worth updating your bios anyway
ruclips.net/video/MPgKTIJsKb4/видео.html
@@TheProvokedPrawn yeah i have a 12th gen, ended up changing some of these settings and not getting bsod, got 1 crash in a game but have yet to test other games, thanks!
Did the board come pre installed with bios support for 14th gen? I bought mine 3 weeks ago and having major issues to flash but since I cannot post I don't know if it's a CPU compatibility issue or something else
is this a good enough mobo for i9 14900kf? I am planning to buy one...
If you have an AIO cooling system, do you plug it into the spot on the motherboard that says “pump fan” or the spot that says “CPU fan?”
Ps. (I haven’t booted the system yet but) I guessed I should plug into the CPU fan spot then started having second thoughts about that. Am I wrong or does it even make a difference? The downloaded manual is thin on info and doesn’t explain much.
It's fine to use CPU fan
@@TheProvokedPrawn thank you for the info! 👍 I really appreciate your videos!
i just build my first my with this motherboard ans when i plug my hdmi cable in the graphics card or the MB my monitor just wont work, i tried to unplug my graphics card and reboot my pc and now my monitor work, i installed the latest bios update ans tried to plug my graphics card back but it still doesnt work, can anyone help me out?
@@yackouille5287 are you sure your power cables for the GPU are plugged all the way in?
@@TheProvokedPrawn yeah i just found the issue i needed to download some drivers everything is good now thanks for your help :)
How do install my WiFi when I’m still signing up for windows 10 and no WiFi’s pop up
ruclips.net/video/i5SgqcjyZdU/видео.html
You are my king thank you so much for this vid 🙏
No problem 👍
mannn I am shitting myself gonna build my first pc soon only part I’m really worried about is connecting everything on the board and cable managing in general
This might be useful How to build a gaming PC: ruclips.net/p/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
thanks man, will be looking at a few of the videos once i have all my stuff ready for the build. wish me luck ill be using the same board in this video@@TheProvokedPrawn
My bios is crashing whenever i am changing settings. Please help. I just got this motherboard just 2 weeks back. I have updated to latest bios
I've never seen that before so wouldn't know what to suggest. Unless you haven't connected power cables correctly and it's not getting enough power?
Does this have the 3 pin 5v header for rgb?
This doesn't work for the Carbon Wifi II for whateve reason.
Thanks for the video! I am having an issue with the computer turning on but it has a yellow light on the motherboard. Nothing is booting (HDMI or DP or USB ports etc)
Any tips or ideas?
Thanks so much
I’m currently having the same problem. Did you ever fix this?
@ my graphics card wasn’t inserted all the way.
@@Reckless2402 I’ll have to double check that
@ double check all your pieces connected to motherboard.
@ problem ended up being that the mobo didn’t like x2 64gb ram sticks on first start up. Removed 1 stick and it’s fine now.
Do you recommend this board? I can get it for $150
Do you know motherboards that support gen 5 m.2 that doesn't cut the pcie gen 5 x16 to 8x?
my clip isn’t snapping the card together
Am I a bot or does it not have a display port?
Will I be able to use this mobo with 10 Lian li Infinity fans? I noticed it only has 1 rgb connector. Is that enough ?. I’m running 3 of them on a kraken 360 elite.
Hey man I see u still check comments I have a problem where the Ethernet port is blocked can I try and move it or will this break it?
Not sure what you mean
Thanks you ❤❤❤
Welcome 😊 hope you enjoyed enough to subscribe
@TheProvokedPrawn is the MSI Z790 Gaming Plus WiFi a good motherboard i was lookinng to get the pro but like the Plus
Not tried the plus
@@TheProvokedPrawn ok I just purchased the pro
Will this be able to handle i9 14900K ?
Hi, I have a doubt. I have a 13400F processor. Do Cpu_pwr1 and Cpu_pwr2 both need to be connected? Or just one? Thanks.
I need feedback guys do you think this motherboard is actually worth it or should I just spend more for a better one
HI, I installed this motherboard in a new build about a month ago and the only limits I saw that were not addressed in the video were it only contains 4 sata ports, I'd have preferred more.
Where did you plug in the AIO pump cable? I tried both pump_fan header and cpu header and both times it shows in bios that it has 0 rpm ... but the c[u is about 30 degrees, so the pump works
Hi, same for me with a kraken x53 on pump
Nice video..❤❤❤❤
Thanks 🤗
How many fans can i put on the case fan plug
Damn... I have an MSI Z77 mpower with the same damn issues and I actually hate it for being such a buggy mess. I am waiting for this z790 to arrive and I am kinda disappointed I will have to deal with the same shity issues and a buggy mess of a motherboard. Why are they still present after over 10 years???
Just make sure the bios is updated.
I’m getting a yellow light on the mobo and the system won’t boot. Any ideas?
ok i just got the board is there a reason my a2 ram slot only working? help
Have you fully seated the ram? We had to really push it in to get it working properly. Harder than other boards
PC Builder
Reply
hello can you help me out built new pc but i cant get buy the windows connecct to internet i have tried shift f10 but i cant type in the cmd box keyboard not responding how can i get it working and how can i update the drivers for the wiffi or lan off the msi website i have them but can you install them from the bios screen
PC Builder
Reply
Are you sure the LAN ones don't work? Can you try an ethernet cable? Sometimes LAN does but wifi doesn't right out of the box
Do most of these newer motherboards already have the TPM switch and UEFI settings already activated so all you have to do is insert the Windows 11 USB install?
I have question Is there a difference between 120MM ARGB and 120MM PWM of XPG Vento Fans
Does it usually take longer than 30 minutes to update to a 14th gen bios using the flash bios method? 😭
Did it ever work for you?? I need to update mine and I’m so stressed it won’t work 😭
Hello, does the I9-9900K fit this board please? Thank you
No. It's for 12, 13 and 14th gen.
Do i download the newest version on msi even if its (beta)
What about VRM of this motherboard? What are controller and mosfets?
Where do I connect the wifi antennas?
Good video but you should’ve made a full tutorial.
ruclips.net/video/QTVlt1wQG7U/видео.html
You should upgrade your water cooling system with downside air-flow to take the heat of VRM out... I don't like the water cooling system because of its risk and low reliability.....
Do I need to change the 1700 socket frame? they say they bend. Or they fixed it
Would an I7 11700F work on the motherboard?
No. This is LGA 1700 socket. For 12, 13 and 14th gen
This is a good p/p motherboard.
Is it possible to undervolt my i9 with that bad boy?
ruclips.net/video/jP7nERdD-Gk/видео.html
hey man ram max 6800 or 7200 ?
Can you update the bios using only a 14th gen cpu or do I need a 12-13th gen installed to update?
If the board has BIOS Flashback, you should not need ANY cpu installed in order to do the update, just a flash drive.
Apparently you need to do it with all the parts not installed I am readying