Thanks for the video post. I pretty much knew how they bolted up to the knuckle but wasn't sure if the brake lines were a direct swap now I know they are . Gotta get a set of spacers as well since I don't immediately plan on new wheels . I found the front 6 piston for $440 a pair shipped they aren't branded with brembo decal but high temp decals are $5 dollars. I have mildly warped rotors and figured with an extra 60+ NA HP and this weekends nitrous install brakes should be on the list 😅
Those caliper bracket bolts are torx bolts be careful with that 12 point you might strip them if the ever get stuck In there due to rust! But great video with lots of good info!
@Robert Gonzalez an e torx socket, if your in the United States you should be able to find them at Harbour freight or any other major tool retailer. In canada canadian tire has them as well as princess auto!
That’s good to know u don’t have to swap hubs to run brembos I buying a set now only didn’t cause I thought it was like rt charger or challenger and has whole different hub from the srt stuff super happy I looked this up
Great video it seems the v6 and Rt Durango share the same braking system which is great!!! My 392 Daytona had 6 piston been is as well and the are awesome. I’m gonna look into doing this mod on my AWD limited Durango!!!
I’m about to do this upgrade but I’m concerned there won’t be enough clearance with the stock r/t rims, you didn’t seem to have that issue but or rims are different.
hello, informative vid. Question, In the parts ordering info, I dont see the slotted rotors ? Were they from rock auto as well ? can you proviode info if possible. thanks in advance.
@@ZacWade oh thank you i clicked the link and it seemed to just be one right caliper from rockauto for around 338. A piece . Did not realize disc is included. Thanks.
What is the reason for purchasing the Titan 1" Hubcentric Wheel Spacers? I don't see them referenced anywhere in either the front or rear video. I've got a 2015 R/T Durango with 20" factory rims (265/50R20). Will the parts you listed fit my year, and are the wheel spacers required. (Great videos BTW!. Thanks!)
Great video. Did you have to get a specific rotor for the calipers? If so, how would you know what to look for? Appreciate the help as it too am looking to do this to my 21 rt Durango
Thanks for the response. That’s exactly what I had to do plus 1.5” spacers. The brakes and rotors are on now and look great! I’ll eventually get SRT rims so I don’t have to use spacers. I like the look over other rims out there.
So I have the RT 2021 Durango I wanna install the Brembos to on my truck. I was really hoping they r a direct fit 👍🏻👍🏻 what about the brake line ? Can the old one be used or should I use steel brake lines
Great insight doesn’t the Hemi Durango and gt models share the same oem brake calipers lines etc? I’d do I’m gonna put a set of bremnos on my AWD limited since my 392 Daytona has these 6 pistons and they are awesome
@@ZacWade your a legend for posting this video, all the peopel in forums seem confused yet you on the other hand you took matters in your hands and simply could've said "would you look at that" 😅 Appreciated it🤜🏿🤛🏿
Hey.. good afternoon brother.. I have a question.. I have a Dodge durango R/T Hemi 2021 I want to put the same rear brakes on it.. that you used for your Durango.. Do you think they can be put on...? My durango isn't AWD it's 2WD
@@el-nahasmohamed8212 I was wondering the same thing for my 2021 R/T AWD. But I came across different part numbers for the front calipers. Front left: 68507581AA Front right: 68507582AA Can anyone confirm these are the brembo calipers from the SRT ?
I have a 2016 DD R/T with tow n go 20x10 wheels I had put(no lift); so, I lowered the tire size to 275 45r20 A/T for now because I'm not sure about 285/50r20. My abs is trying to adjust to it, so I'm considering adding that big brake set to see if it handles the wheel mod better. Do they have to update the ABS system to accommodate it?
I see you have a 1" hubcentric wheel spacers on the list but I do not see that in the installation. Are these required...1in spacers is seriously wide.
@@ZacWade Okay gotcha ...I have 22 x10 Hellcats...Any Idea if these will fit without spacers? Thanks very much....Great video...Did not know the swap was this easy
Are those the stock 20x8-inch wheels for the R/T? I was led to believe that those wheels don't have enough clearance for the Brembo calipers. Did you have to use offset spacers?
@@ZacWade A full inch!!!????!!! Wow!! That's gonna mess with the scrub angle. Have you noticed any odd wear on the tires? Can you feel any trembling in the steering wheel when you brake or hit a bump or pothole? Please don't interpret my reaction as criticism. I'm just shocked.
Does the pins and the rattle clip come with the Caliper 68146610AA . The blow up illustration shows non Brembo brakes. Just wanted to make sure I did not have to buy any other parts.
Hey Zac awesome job, what size rotors where u able to fit. The srt has 380mm front and 350mm in rear. While the Rt came with 350mm front and 330mm in the rear.
Hello mate hope ur still replying to questions? I have a 2012 Dodge Journey 3.6vvt would these brakes be suitable for my car? Thanks in advance 👍🏻🇦🇺 cool vid too mate👏🏻cheers
Here is a link to the video for the REAR Brembo Brakes install: ruclips.net/video/q9K7wOEOc0Y/видео.html
Where can I get them from
Thanks for the video post. I pretty much knew how they bolted up to the knuckle but wasn't sure if the brake lines were a direct swap now I know they are . Gotta get a set of spacers as well since I don't immediately plan on new wheels . I found the front 6 piston for $440 a pair shipped they aren't branded with brembo decal but high temp decals are $5 dollars. I have mildly warped rotors and figured with an extra 60+ NA HP and this weekends nitrous install brakes should be on the list 😅
Amazing video. I think this is a must do for any R/T. I’ll have to do it when it’s time to change my brakes.
Those caliper bracket bolts are torx bolts be careful with that 12 point you might strip them if the ever get stuck In there due to rust! But great video with lots of good info!
What tool would I use to carefully take off these bolts?
@Robert Gonzalez an e torx socket, if your in the United States you should be able to find them at Harbour freight or any other major tool retailer. In canada canadian tire has them as well as princess auto!
Thanks for posting this. I’m thinking of do this to my Durango GT.
You just saved me a bunch of time and money by doing this, thank you
Nice. Grab yourself an E20 Torx socket. That's the proper socket for the caliper bolts.
and also I do have spacers on the stock rims and they are 20's , Thank you for your time in advance
Great video!!! I've been wanting to do this to my RT for a long while. I'm gonna pull the trigger. Thanks
Nice!
I want to do this to my RT Durango. I'm gonna wait until it needs breaks it only has 50 miles on it now.
Seems pretty straight forward.
Time to start looking! 😎
Super easy, the most time consuming part is bleeding them
That’s good to know u don’t have to swap hubs to run brembos I buying a set now only didn’t cause I thought it was like rt charger or challenger and has whole different hub from the srt stuff super happy I looked this up
Great video it seems the v6 and Rt Durango share the same braking system which is great!!! My 392 Daytona had 6 piston been is as well and the are awesome. I’m gonna look into doing this mod on my AWD limited Durango!!!
I’m about to do this upgrade but I’m concerned there won’t be enough clearance with the stock r/t rims, you didn’t seem to have that issue but or rims are different.
You have to get spacers or you won’t have enough clearance. I have factory rt rims but I put 1” spacers on to fit
Thanks man I was just watching your breaking vid and saw it 👌🏾
Nice! Should be no different from my 18 Jeep wk2 5.7! I need that better stopping power for adding boost.
Great video bro, you think or anyone knows if those brembo calipers will fit on a older 2013 Durango R/T?
I would think it should
amazing video!
please, does these callipers fits on Ram 1500? classic shape
Ive spent over 5 hours trying to find rotors. I keep seeing 14 in or 15 in for fronts. Is it the 15 inch rotors?
Ok, but they look good but do they actually stop better?
Yes, I have another video where I tested stopping distance before and after
So you dont need new spindles and knuckles like the chargers and challengers do in order to put brembos on?
Thanks I’m going to do this to my RT
hello, informative vid. Question, In the parts ordering info, I dont see the slotted rotors ? Were they from rock auto as well ? can you proviode info if possible. thanks in advance.
The powerstop kit that is linked in the video comes with rotors and pads
@@ZacWade oh thank you i clicked the link and it seemed to just be one right caliper from rockauto for around 338. A piece . Did not realize disc is included. Thanks.
What is the reason for purchasing the Titan 1" Hubcentric Wheel Spacers? I don't see them referenced anywhere in either the front or rear video. I've got a 2015 R/T Durango with 20" factory rims (265/50R20). Will the parts you listed fit my year, and are the wheel spacers required. (Great videos BTW!. Thanks!)
Wheel spacers are required
Hey, does a 9x20 inch ET 50 rim still have a wheel spacer on it..? Or do the Brembo saddles fit down like that..? Thanks for the info 🙂
Im trying to see if some 2014 brembos from a srt fit a 2012 overland 5.7
Yeah I’m honestly not sure on that one if they will or not
u can use the existing break line?
Yeah
Great video. Did you have to get a specific rotor for the calipers? If so, how would you know what to look for? Appreciate the help as it too am looking to do this to my 21 rt Durango
Yes you need a larger rotor. I went with powerstop z26. Go on rockauto and search for rotors using a 18-21 durango srt or 12-21 jeep srt
Thanks for the response. That’s exactly what I had to do plus 1.5” spacers. The brakes and rotors are on now and look great! I’ll eventually get SRT rims so I don’t have to use spacers. I like the look over other rims out there.
I got trackhawk brembos for my jeep but rock auto don’t have the bigger ones rotors
Got to amazon
Great job man brother , I wonder if the Brembros would fit a 2015 jeep grand cherokee 3.6?
So I have the RT 2021 Durango I wanna install the Brembos to on my truck. I was really hoping they r a direct fit 👍🏻👍🏻 what about the brake line ? Can the old one be used or should I use steel brake lines
Old brake line can be used and is fine
Awesome video. I have 1/2" spacers on my R/T, do you think those are enough or do I need to move to the 1"? 1/2" didn't require new bolts.
I would get larger spacers. 1” barely clears
Did you need any spacers to get the oem wheel to fit?
Yeah 1” minimum
Hello you have to change the router
Great insight doesn’t the Hemi Durango and gt models share the same oem brake calipers lines etc? I’d do I’m gonna put a set of bremnos on my AWD limited since my 392 Daytona has these 6 pistons and they are awesome
I think they do share the same brakes
i want to do this on my 2021 charger do i have to get the srt knuckles to do it?
You shouldn’t have to
Question what do I need to convert my RT Durango to srt Durango ?
I have a 21 RT would it just be a plug and play or would I need extra
Should be plug and play
So you saying its a simple swap only🤔 just like that?
Thank alot for this
Yeah simple as that
@@ZacWade your a legend for posting this video, all the peopel in forums seem confused yet you on the other hand you took matters in your hands and simply could've said "would you look at that" 😅
Appreciated it🤜🏿🤛🏿
Just wondering if used new crush washers/gasket and you reattached the brake lines?
Hey.. good afternoon brother.. I have a question.. I have a Dodge durango R/T Hemi 2021
I want to put the same rear brakes on it.. that you used for your Durango..
Do you think they can be put on...?
My durango isn't AWD it's 2WD
Did your brakes have good pressure after u did this? I did it on my jeep gc RT and they said I need to hook up a scanner for the abs pump
You'll have to bleed your brakes after doing this
@@ZacWade so I did...and my pedal still wasn't making great pressure I was told they have to bleed out the abs pump too
Why not attach the new caliper before disconnecting the brake line from the old so you don’t drain so much fluid and have less bleeding to do.
Hi Zac I have a 2017 RT Can I ask what year you have here in the video?
2016
Thanks for the great step by step instructions video dude 👍👍 Do you think same part number will fit my Durango R/T 2021?!
Should! You’re welcome
@@ZacWade much appreciated 🙏
@@el-nahasmohamed8212 I was wondering the same thing for my 2021 R/T AWD. But I came across different part numbers for the front calipers.
Front left: 68507581AA
Front right: 68507582AA
Can anyone confirm these are the brembo calipers from the SRT ?
It's seems like the rwd and awd have the same position for the calipers, so does that mean you can do these on rwd models?
I have a 2016 DD R/T with tow n go 20x10 wheels I had put(no lift); so, I lowered the tire size to 275 45r20 A/T for now because I'm not sure about 285/50r20. My abs is trying to adjust to it, so I'm considering adding that big brake set to see if it handles the wheel mod better. Do they have to update the ABS system to accommodate it?
Wait so you didn’t have to buy an adapter or anything?
Nope
Do u think they will fix a 2014 grand Cherokee
Did you have to replace the spindle
Will this work on the v6 and will I need a set of set wheels to clear the caliper
Where did you purchase your Brembo calipers for your Durango?
I got mine from rockauto but this was a few years ago. They’re hard to find and expensive now so I’ve heard
Expense is not a problem, the problem definitely is finding them, it’s like looking for “Where’s Waldo” on a jumbo page.
@ZacWade do you have the part number for rockauto
Does it matter if my Durango RT is 2020 will I still be able to do this procedure ?
Yeah you can absolutely
I have a 2022 Durango R/T. Are all the brembo calipers for different years still bolt on?
what year srt jeep can fit a 2013? 🤔
Hey Zac... Did you have to use wheel spacers? I just got my calipers I'm waiting on the pads and rotors
Yes in the description there’s a link
You didn’t have to change the spindle knuckle?
What kinda rotor did you use to fit the brembos and where can I find them?
Hey man, all links are in the description for parts i used
thanks for the video, i might do the same to mine
No problem! Rear brakes video coming soon
Who powdercoated them for you, and did you have to disassemble them prior to powdercoating or did they do that?
I want to change my calipers out just order front and back rotors I like the SRT
Wait never mind I forgot you have an 07. Not sure it works like that for those
@@ZacWade what happened if I change the spindles
I’m honesty not sure man, wish I could be more help
@@ZacWade don't trip I appreciate it
I see you have a 1" hubcentric wheel spacers on the list but I do not see that in the installation. Are these required...1in spacers is seriously wide.
For factory rt wheels they are required
@@ZacWade Okay gotcha ...I have 22 x10 Hellcats...Any Idea if these will fit without spacers? Thanks very much....Great video...Did not know the swap was this easy
@@wesleydean1358 you should be good, what’s the offset?
@@ZacWade +45
Just checked looks like the 2021 Durango have different part # for Brembo's What year is yours?
16, your rims should clear fine
Does the back have also or just the front
Yeah look in my videos for the rears
Are those the stock 20x8-inch wheels for the R/T? I was led to believe that those wheels don't have enough clearance for the Brembo calipers. Did you have to use offset spacers?
One inch spacers
@@ZacWade A full inch!!!????!!! Wow!! That's gonna mess with the scrub angle. Have you noticed any odd wear on the tires? Can you feel any trembling in the steering wheel when you brake or hit a bump or pothole? Please don't interpret my reaction as criticism. I'm just shocked.
Nope no issues. Wear on front tires is a little uneven due to it being lowered. No issues relating to spacers
@@ZacWade Thank you for your time.... and for these instructive videos.
Does the pins and the rattle clip come with the Caliper 68146610AA . The blow up illustration shows non Brembo brakes. Just wanted to make sure I did not have to buy any other parts.
No, those come with the powerstop rotors and pads kit. Just use the links i put in the video description, that’s everything you need
Zac I have 2021 Durango R/T and want to do this to mine. Will this work on mine. Did u find those calipers under ur vin or diff vin
Links in description directly to parts. You have to search for them under a jeep srt or durango srt
dude, do you have the link for the front rotors?
In the description, you can also visit rock auto
Hi, thinking of doing the same to my 2019 R/T but can I still use the stock 20in wheels or will it rub?
If your wheels are only 8” wide you will need spacers or different wheels
How much were the brembo brakes and rotors for the durango r/t ?
Hey brother u think they could fit my 2018 Dodge Durango rt
Absolutely
What are these brembos off of and will they fit a 2015 jeep grand Cherokee?
You can get them off any trackhawk, hellcat durango, 12+ srt jeep, 18+ srt durango. And yea they will fit
I have a 2017 is there a certain year for the brembos you need to have ?
2014+ should for sure work, i would assume 2011-13 but not positive
Hey Zac awesome job, what size rotors where u able to fit. The srt has 380mm front and 350mm in rear. While the Rt came with 350mm front and 330mm in the rear.
Same size as srt
@@ZacWade since u used the srt size rotors on ur rt were u able to clear the calipers from ur stock rims?
Had to use 1” spacers
@@ZacWade link for those rotors
Does any one know if the brembo calipers from a 2021 Durango would have any issues on my 2017?
Great video bro!! Quick question.,
Do you think this brembo kit will fit my 2WD Durango?
What year?
@@ZacWade 2016 Durango R/T
They will fit fine
@@ZacWade perfect!!! Thank you for your help man
@@ZacWadehello l can put brembo from a jeep srt 2015 for my durango rt 2015 ??
Hello mate hope ur still replying to questions? I have a 2012 Dodge Journey 3.6vvt would these brakes be suitable for my car? Thanks in advance 👍🏻🇦🇺 cool vid too mate👏🏻cheers
No they won’t work
will these calipers fit on the K7136-36 powerstop set
Will this work on the 2018 V6 models also
Yea it should
What size rotor are the powerstop
Are you buy special for Durango or buy jeep srt?
You can buy these for 2018+ srt durango or for 2014+ jeep srt
Did your Durango throw an electronic stability control code after the install?!?
No sir
Bro
Where did you order the Brembo set??
Thanky you. Do helpful.
Great video man, just subscribed 🤘🏽 getting ready to do this same upgrade on my Jeep Grand Cherokee Limited X 🔥
Thanks man!
Why?
@@MidwestMotor why what?
Ok what about the spindles?? Its like NO one ever talks about the important needed parts to support the bembo upgrade/swap on the durango.
U Don’t need those the srt ones are the same on jeep or Durango it bolts on goofy lol😂🤦♂️ he just showed ya
What year is your R/T?
16
Link for brembos
So these fit on the stock 20 rt rims?? I'm confused I keep being told I need srt rims I have a 2019 blacktop edition
If you have 1” spacers on all wheels they will fit stock rt wheels
How much did you pay for the system?
About $2000 total I believe, pricing and links are in the description
Do we need bigger wheels or spacers in order to fit these calipers ?
Yes
@@ZacWade what size do you recommend and spacers?
@@compk4rma-190 1” spacers and stock wheels will fit
Just subscribed btw!
Hi do I need a wider spacer for my 17 citadel I have the brembo and rotos was waiting on wheels but I can do spacer for now?
What size rims on your citadel?
20x8 I think 20 for sure
1” should do it
Great vids! I'm about to do this on my wife's '19 R/T. What are the torque specs for the front and rear mounting bolts?
Off hand I’m not sure I’d check your haynes manual
I can put a jeep srt caliper on a Durango??
Yes if its off a 14+ srt jeep
The description says ebay caliper brembo 12~20 jeep srt what do you think boss
What’s the part number?
@@ZacWade look por the vin is from a jeep grand cherokee srt 2012
1C4RJFDJ9CC173819
Do u really need the spacers or can do without
You need them on stock wheels
@@ZacWade ok thxks bro
Do you have the link for the rear ones ?
I’ll get that up soon when i post a video of how to do the rears. They’re on rock auto. Just search calipers under a durango srt or jeep srt (6.4l)
I got that rear video up man! Even easier than the fronts
@@ZacWade thanks boss 😊
Are the rotors the same size as the ones you took off
No they are not
Will this work on a 2013 ram 4x4
I dont think so but not 100 on that
I’m gonna do this to my moms V6 Durango 😂
Hey will this fit on my 2019 RT Durango
Yeah should fit fine!
@@ZacWade ok how much did it cost for front and back
About $2200-2300 total
@@ZacWade OK the dealership told me $4000
Just for parts???
Does anyone know if these Brembo 68146610AA fit on a 2021 DD R/T?
Yes sir. If it fits jeep/Durango 2018-2021. Did the upgrade on my 21 DD
What born on date is your Durango? Thanks!