Hi, I think I'm going to use a 9v/12v power supply for the same project, which components should I change? Also, I want to put them all in a PCB. Btw really good video, and well explained.
Yes. You can use water pump motor. But make it will be operated with 5v Dc. If you are going to use 12v motor then make sure power supply for ir sensor module should be 5v. Otherwise it will get burnt. Thanks for watching video. Hope you will like my future videos also.
Bro without transistor you can not run the dc motor on ir sensor. When ir sensor detects the obstacle in front, it sends signal to transistor which runs the dc motor. So the dc motor will get operated when the ir sensor detects some object. Hope you like the project.
@@crazzyelectronics to check if it is working I connected both the terminals with battery, only the power light is turning on but no response of signal light
Your ir sensor has been damaged. Take new one and check weather it is working or not. Make sure power supply for ir sensor should not be more than 5v..
Thanks for watching video. No you can't use tip32c because tip31c is npn type and tip32c is pnp type transistor. Hope u like the video. Please like share n subscib channel for more interesting projects😊😊
I'm happy.Because this project is success.
Thanks 🙏🙏
Thanks bro I do in the school it is success ❤️❤️
Hope you like the project. Please like n subscib channel for more interesting projects. Thanks 😊😊
03:48 I'm happy.😊😊
Mai soch raha tha sirf mujhse hi soldering nahi hota hai.😂😂😂
Ek no. 👍
bro i have seen your maximum video and in this video can we use 7805 transistor
Hi, I think I'm going to use a 9v/12v power supply for the same project, which components should I change? Also, I want to put them all in a PCB. Btw really good video, and well explained.
Bro really nice video.....
Can we reverse the operation means if we take the obstacles near to the sensor then motor speed decrease !..
Thanks for watching video. Yes you can reverse the operation by inverting connections. like n subscribe channel for more interesting projects. Thanks
@@crazzyelectronics hey guy where is circuit diagram
Great video except for the stupid wording blocking the view
Why you used transistor? please explain.
Thank you so much bro
Your Welcome.
@@crazzyelectronics Bro Please making a video How to use MG995 Servo motor with ultrasonic sensor with arduino
And Give Code and diagram
Sure. I will definitely try to make this project. Thanks for your suggestion.
bro please tell can we use coreless motor in place of c motor pls tell
Can I use 1k 1/4v resistor?
What it can does for two IR Sensor? Forward and backward
If I want to make it work when there is no object blocking the sensor then what should I do?
Can we use water pump motor on geared motor place
Please tell fast
Please
Replay e
Yes. You can use water pump motor. But make it will be operated with 5v Dc. If you are going to use 12v motor then make sure power supply for ir sensor module should be 5v. Otherwise it will get burnt. Thanks for watching video. Hope you will like my future videos also.
Sir plz batao ki aapne power suply kitni ki di hai
5volt 1 Amp ki power supply di hai.. isase jyada nahi de sakte. ir sensor module and motor dono damage ho jayenge.
Thanks alot sir
Can we use bc547?
No. Because bc547 has low current operating capability. Instead you can use any other MOSFET. Thanks for watching video.
Can I use IRFZ44N mosfet
What is the purpose of transistor?
why do we need transistor and recivger cant we connect directly
How much volt power supply did you use
Thanks for watching videos. I have used 5v dc power supply to run the motor.
Ohk..then What's the use of transistor there
Bro without transistor you can not run the dc motor on ir sensor. When ir sensor detects the obstacle in front, it sends signal to transistor which runs the dc motor. So the dc motor will get operated when the ir sensor detects some object. Hope you like the project.
Ohk Thank you for the information
What did you use for 5v dc power supply
How do you add another ir sensor to reverse
Circit daigram dikhaia na please..
I will upload circuit diagram very soon.. Thanks for watching my video.. 😊😊
I used 2n2222 h331 transistor.....but motor working not ir
Make sure your ir sensor is running. Give only 5v supply to it. Supply geater than 5v will blow the ic of ir sensor. Thanks for watching video.
@@crazzyelectronics to check if it is working I connected both the terminals with battery, only the power light is turning on but no response of signal light
Your ir sensor has been damaged. Take new one and check weather it is working or not. Make sure power supply for ir sensor should not be more than 5v..
Can I use tip31C instead of tip32C???
Thanks for watching video. No you can't use tip32c because tip31c is npn type and tip32c is pnp type transistor. Hope u like the video. Please like share n subscib channel for more interesting projects😊😊
But ir doesn't work in sunlight
Of course, it will not work in sunlight. It's infrared led light sensor
1k rasister le sakte hai
I am going to buy requirments
you can buy IR sensor module and bo motor online ..
thanks for watching my videos
.
You can buy the requirements from link given in the description of video..
I know the shop, it's in cantt and i buy every thing from there only.
👍
Nice one👍💐
thank you..
Not clear bro... Total confused
🌹🌹
i have to try in this school I hope this works ,But please tell me from 1 sensor how many motor I can run
Provide circuit diagram
Why that disgusting music. If at all you want music, record it at the lowest volume. You spoiled your best program with your music.
Nahi hota he
Is it possible to reverse the motor on and off?
Thanks for watching video. I have not tried this, but let you know very soon. Please like and subscribe channel for more interesting projects. Thanks
@@crazzyelectronics Thank you for your reply. Please let me know how to make it. I want to use your idea for making a avoiding obstacles car.
Ok. Thanks..
@@cowheyo is it working pls tell
please tell applications! asap
Thanks for watching video. You can use this in many applications like automatic handwash dispenser, sanitizer dispenser, auto door lock open, etc
Can you please send me circuit diagram
Thanks for watching video. Yes. I will upload circuit diagram very soon. Please like and subscribe the channel for more interesting projects..
Plz show a proper pic of the wiring I detail
,
Thanks for watching video. Please like n subscib channel for more interesting projects. Thanks😊😊