Get more installs and product reviews on Countersteer : www.jpcycles.com/countersteer?SandS_Cycle_Stealth_Intake_/_Mini_Teardrop_Installation_:_Milwaukee_Eight_Softail&Od2bYxw0n2Y
What’s the surface area of the teardrop filter vs the stock filter? How drastic is the change in volume between air filters if the throttle body is still stock?
Question, I see that you removed by scrapping a gasket. I received a ss mini teardrop ac n only see a o ring in packaging. Do I need to buy a gasket that goes in to TB?
I was told back when I purchased my low rider s in 2020 the stock intake was considered hi-flow. Rode it all over the country with an exhaust and 475 cam, is this a worthwhile upgrade at this point? I pull the plugs and see it's running fine...
hey guys just ordered a tbr 2-1 megaphone to the uk! ive got this air cleaner and a fp3 whats the best cam youd recommend for this set up? i have a 2020 low rider s
It will flow more air than your stock unit and the filter is serviceable unlike the stock one. As for hp gain your best bet would be to combine it with a exhaust and tuner for best results
@@jpcycles interesting. I already have Cobra 2-1 powervision tuner and s&s 475c cam but the stock 114 intake. so would you recommend i upgrade the to the teardrop for my setup?
@@ThatHarleyChannel Yes, If you have a cam/exhaust/tuner your cheating yourself out of some extra hp not having a better intake. At least swap out the filter
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Get more installs and product reviews on Countersteer : www.jpcycles.com/countersteer?SandS_Cycle_Stealth_Intake_/_Mini_Teardrop_Installation_:_Milwaukee_Eight_Softail&Od2bYxw0n2Y
I've got a external breather system on my m8 as of now with the stock air cleaner... could I use the stock bolts with this S&S setup?
@@spoom937 I'm not sure on the spacing (length) of the stock bolts in comparison to the S&S backing plate. Other than that it would probably work
@@jpcycles I'm hoping it does because I'm not going back to venting into cylinders! Not after what I've dumped out of that catch can lol!!!
Sir. I have to tell you, you have the best DIY instructional video in the world of RUclips. Thank you so much for making my life bit easier....
Thanks appreciate it.
-Patrick
Thanks for this vid. Been thinking about putting the S&S teardrop on my 18 Heritage 114. I like the old school style.
Enjoyed the video, very well explained. Ordered the mini stealth in chrome from y'all, looks great on my low rider!
Great video, I just put this on my 20 low rider s with zero issues
What’s the surface area of the teardrop filter vs the stock filter? How drastic is the change in volume between air filters if the throttle body is still stock?
Question, I see that you removed by scrapping a gasket. I received a ss mini teardrop ac n only see a o ring in packaging. Do I need to buy a gasket that goes in to TB?
Do they offer an external breather for this? That design looks good but is a no go.
Everytime you say locktight I think red . It makes me nervous .
Heat or pulling out threads to get it off .
What strength is that locktight?
On a stealth air intake for say a 2011 RK, can you reuse the same cover ?
Do i need a tuner to run unit on 103 with 2 into 1 exhaust?
Do you know if the full size cover will fit this backing plate?
I was told back when I purchased my low rider s in 2020 the stock intake was considered hi-flow. Rode it all over the country with an exhaust and 475 cam, is this a worthwhile upgrade at this point? I pull the plugs and see it's running fine...
I would probably just upgrade the filter to a washable/re-usable one.
- Patrick
I have a stage one just bought it. can I put the s s on just out basani on
Living in a place where it rains a lot, do I need a sock with these air filters?
You absolutely do. Clean your filter once and you’ll see how much water goes through the filter.
WOW nice look! What is the size to air cleaner intake on M8 114?
Is the filter washable?
Did you put a new gasket on? Also, can i install and run without tuner? Have VH slipons as well
Hi, do it come with rain cover? Thanks!
What’s a good and easy tuner to use. I ha e never tuned my bike and I just bought an S&S air cleaner?
Good video! Is there a difference between mini teardrop and I assume there's a full size teardrop S&S?
will the fp3 current 2020 model work ok on my 2021 far bob ?
Do yall know if the stock breather bolts will work, instead of the S&S breather bolts? I run a catch can and would like to keep it.
Did this work? It’s way easier the. Having to drill holes and reroute everything vs just running the t off your stock bolts.
Is there any performance gain with the standard teardrop over the mini teardrop? are both filter elements the same? Thanks!
Where can you purchase a rain sock for this?
I just bought the stealth mini tear drop in black and was looking around for info too.
No rain sock needed.
What are your thoughts regarding a catch can or filter bypass on the breather to manage the blow by from entering the intake?
You could certainly do it and be fine. It just isn't necessary, the head breather system works fine.
@@jpcyclesOnly a parts guy would think burning hot/moist/oil rich air, that causes carbon, a good idea.
hey guys just ordered a tbr 2-1 megaphone to the uk! ive got this air cleaner and a fp3 whats the best cam youd recommend for this set up? i have a 2020 low rider s
I’ve been considering the S and S 475 cam
was thinking about changing my 2019 fat bob 114 intake to this intake... looks great! any gain with the new one?
It will flow more air than your stock unit and the filter is serviceable unlike the stock one. As for hp gain your best bet would be to combine it with a exhaust and tuner for best results
@@jpcycles interesting. I already have Cobra 2-1 powervision tuner and s&s 475c cam but the stock 114 intake. so would you recommend i upgrade the to the teardrop for my setup?
@@ThatHarleyChannel Yes, If you have a cam/exhaust/tuner your cheating yourself out of some extra hp not having a better intake. At least swap out the filter
I regret not buying this s&s air cleaner............
you still can! :D
I just bought it now 😆
This mini teardrop air kit has been back order for months.... bummer!!!
do you need a rain sock for this?
S&S must be getting cheap.....my Stealth just arrived...no loctite.
if you have a Harley and dont know where your loctite is you shouldnt be working on Harleys. 😁
On a stealth air intake for say a 2011 RK, can you reuse the same cover ?
On a stealth air intake for say a 2011 RK, can you reuse the same cover ?