Took a set of Flex seats out at a junkyard for my c10 project. And the latches worked while they were in the vehicle, but when I got them home I could get either one to fold. Thanks this has been a huge help.
Thank you a thousand times!! I'm so frustrated with tolerating that seat not working and LIMITING the use of my car!! I thought maybe someone else was having the problem too. 10K+ views, I see I'm not alone. :D
Thank you soo much for sharing this! My Ford Freestyle has the same issue, I ran a zip tie through the original hole and around the cable and tightened it as much as possible and it works now!
Thank you i just bought a 2010 xlt with a blown right turbo for $1110 and so far this is the only other issue I've found. I need to recline it a bit for my son's car seat so huge help!
Thanks for your video. My 2010 Flex 2nd row seat latch has been giving me trouble since I purchased brand new. Had it replaced over and over. Going to give your "fix" a try.
My 2nd row seat does this as well. My Flex is a 2011. What I do is, Push the the back, back and hold and then push up the lever. Doing this seems to tighten up the slack of the cable.
2nd row back seat stuck in flat position. It can fold the entire seat up, but the seat stays in the flat position during. The entire seat can go back down as well, but again, stays stuck in the flat position. What to do?
For this a 1/8” bit with 1/8 rivets. The metal plate was sized to fit the spot. I don’t know what size it was. Probably about 1/2” x 1-1/2”. Just improvise as you need.
Took a set of Flex seats out at a junkyard for my c10 project. And the latches worked while they were in the vehicle, but when I got them home I could get either one to fold.
Thanks this has been a huge help.
You put Flex seats in a Chevy truck? That's dope.
Brilliant solution! Truly appreciate you taking the time to share with the rest of us.
THANK YOU, THANK YOU, AND ANOTHER THANK YOU! I had my husband watch this video to try and fix our bench AND IT WORKED! You are a life saver.
Thank you a thousand times!! I'm so frustrated with tolerating that seat not working and LIMITING the use of my car!! I thought maybe someone else was having the problem too. 10K+ views, I see I'm not alone. :D
Thank you soo much for sharing this! My Ford Freestyle has the same issue, I ran a zip tie through the original hole and around the cable and tightened it as much as possible and it works now!
So did you leave the cable out of the hole? It didn’t effect the pull?
Thank you i just bought a 2010 xlt with a blown right turbo for $1110 and so far this is the only other issue I've found. I need to recline it a bit for my son's car seat so huge help!
Thanks for your video. My 2010 Flex 2nd row seat latch has been giving me trouble since I purchased brand new. Had it replaced over and over. Going to give your "fix" a try.
Our 2009 Flex seat is working after a looooong time. Thanks for your video.
Thx for the post. Mine worked for the first two months of ownership, then went south. Time to implement the fix!
Man I wish I could like this video a trillion times
My 2nd row seat does this as well. My Flex is a 2011. What I do is, Push the the back, back and hold and then push up the lever. Doing this seems to tighten up the slack of the cable.
🎉THAaaaannnK YouU! I have owned my car for 10 years and this has been BAD for almost 7!!!!!❤🎉 GodSend!!!
Thank You 🙏, great job thinking outside of the box. It looks like a faulty design flaw.
Question, is your 2nd row a 60/40 bench or 2bucket seats? Just wanted to know if the 60 side is supposed to tumble like the 40 side.
Thank you! You're doing God's work sir!
2nd row back seat stuck in flat position. It can fold the entire seat up, but the seat stays in the flat position during. The entire seat can go back down as well, but again, stays stuck in the flat position. What to do?
hallelujah, thank brother, my seat has been down for months..lol
Yes thank u my work now it been broken for a year
The cable is stretched, do this or replace the cable. Thanks for the vid!
what size drill bit to drill the two holes..and what size metal piece..it looks small..what did u use to fasten the metal.
For this a 1/8” bit with 1/8 rivets. The metal plate was sized to fit the spot. I don’t know what size it was. Probably about 1/2” x 1-1/2”. Just improvise as you need.
I think I'm going to glue mine back in.....thanks a million!
what kind of glue did you end up using?
Your a god sent thank you
Anyone know how to manually unlock/fold the seat!? Mines broke can't really get to it to fix it!
Phillips screwdriver?
Thanks for the video. I’d would recommend better video quality and lighting next time. 🙂
Really nice. You da man. Thank you!
Happened to us to. Ford dealership wanted a thousand dollars i said fuck no and did it myself
A bet a dealer would buy a whole new assembly that's gonna cost 500 bucks easy
Thank you!!!
hello need help