Good video.. and a very professional and safe way of doing it. I ran some coils in the 90s but kinda had to learn as i went. No videos like this existed then. Ill admit i probably did a lot wrong when hauling coils but thankfully never had an accident etc. These videos truly help people to learn.. so yeah good job.
I never bind on the driver's side if I can help it. Always helper's side, that way if I have to tighten a chain on the side of the road, I'm not standing in traffic.
Nice work. I highly recommend sticking in a set of ear plugs before throwing chains. Metal on metal right at ear level is enough noise to give a guy tinnitus. I know because that's what happened to me. You don't want tinnitus. Also, I never pull a bungee without something covering my eyes. Too many snapped bungees have whacked me in the face.
Good morning buddy, I am getting into business and is been quite a while since I've done flatbed loads so I found interesting seeing the coil sideways and I've ask myself all of driving life why they never do it this way. Is it something new?
I have a question. I haven’t watch the full video my brother and I know that DOT have requirements. What about being top heavy and you are traveling 65mph and you have no choice put to slam on brakes. If I was to put 2 chains on top wrapping the top. Will that be good or bad. Also what about laying the coil down? To reduce to top heavy height? I new to the business and sometime the trailer wheels have to jump the curb making a turn. Top heavy if it is over the center of gravity it will roll over. I have questions. If the shipper have equipment than I will be looking to protect the public. That rocking of jumping a curb could damage property or even you. I will always keep 6”x6”x9’ lumber and Cordless Dewalt Saws and aluminum beams nail to ensure my shipment is safe from public and safe for me. I think flatbed trucking is the most skillful trade in trucking. I also see why a lot of truckers don’t like curtain side. They can’t see the load. I think I will love flatbed. A New Jersey State Trooper said to me. I will be a good flatbed driver after working on Highway with commercial trucks on both sides on you and in the center lane. You look at safety more than money. I want flatbed trailer because of the challenge like the motor grader. Thank you. I am going to Home Depot to look at equipment to protect the public and me. I would of been a good Secretary of Transportation for the safety of the industry. A good DOT officer and good cop. I would of went to the President about safety of the industry.
Not sure if your just crazy but whoever else reads this I can answer some of his questions : Even if it is top heavy it won’t flip unless you roll the trailer, it also won’t bounce if you secure it right. You wouldn’t want to throw chains over the top of load either because you can and will damage the coil. You can throw straps that just as secure
No it is the most efficient way. If you horse shoe secure them it halves the securement strength and you have to use twice as many chains. If you didnt, your load would not be secured legally. They also cant be twisted together.
No friction mates under the bunk and/or no tie down in front of the cradle?! You're not qualified to teach anyone anything. Fail! "− A cradle (for example, two hardwood timbers and two coil bunks) that is restrained from sliding by: • Placing friction mats under the cradle • Using nailed wood blocking or cleats against the front timber • Placing a tiedown around the front of the cradle."
Good video.. and a very professional and safe way of doing it. I ran some coils in the 90s but kinda had to learn as i went. No videos like this existed then. Ill admit i probably did a lot wrong when hauling coils but thankfully never had an accident etc. These videos truly help people to learn.. so yeah good job.
Straight to the point no jibber jabbering excellent video
"This is gonna wiggle very little, going down the road" Agreed!
you supposed to put the rubber mats on the trailer! Coil racks goes on top of the rubber mat keep it from sliding!
I never bind on the driver's side if I can help it. Always helper's side, that way if I have to tighten a chain on the side of the road, I'm not standing in traffic.
Seen a lot of coil wraps never a package wrapped this tight and neat
Nice work. I highly recommend sticking in a set of ear plugs before throwing chains. Metal on metal right at ear level is enough noise to give a guy tinnitus. I know because that's what happened to me. You don't want tinnitus.
Also, I never pull a bungee without something covering my eyes. Too many snapped bungees have whacked me in the face.
Great advice. But what is tinnitus?
@@brandonjackson6274 Ringing in the ears
I don't understand why they don't load these coils flat on the truck, with the "eye" pointing up. It would be much safer.
Why not put the coil over the axle?
man his tarp job is great
i just put whatever in whatever and hold it together so it doesnt move around lol
Very good video
Thank u a lot sir u taught me something new
Good morning buddy, I am getting into business and is been quite a while since I've done flatbed loads so I found interesting seeing the coil sideways and I've ask myself all of driving life why they never do it this way. Is it something new?
I have a question. I haven’t watch the full video my brother and I know that DOT have requirements. What about being top heavy and you are traveling 65mph and you have no choice put to slam on brakes. If I was to put 2 chains on top wrapping the top. Will that be good or bad. Also what about laying the coil down? To reduce to top heavy height? I new to the business and sometime the trailer wheels have to jump the curb making a turn. Top heavy if it is over the center of gravity it will roll over. I have questions. If the shipper have equipment than I will be looking to protect the public. That rocking of jumping a curb could damage property or even you. I will always keep 6”x6”x9’ lumber and Cordless Dewalt Saws and aluminum beams nail to ensure my shipment is safe from public and safe for me. I think flatbed trucking is the most skillful trade in trucking. I also see why a lot of truckers don’t like curtain side. They can’t see the load. I think I will love flatbed. A New Jersey State Trooper said to me. I will be a good flatbed driver after working on Highway with commercial trucks on both sides on you and in the center lane. You look at safety more than money. I want flatbed trailer because of the challenge like the motor grader. Thank you. I am going to Home Depot to look at equipment to protect the public and me. I would of been a good Secretary of Transportation for the safety of the industry. A good DOT officer and good cop. I would of went to the President about safety of the industry.
Not sure if your just crazy but whoever else reads this I can answer some of his questions :
Even if it is top heavy it won’t flip unless you roll the trailer, it also won’t bounce if you secure it right.
You wouldn’t want to throw chains over the top of load either because you can and will damage the coil. You can throw straps that just as secure
@@vnkable 🤣🤣 hes Insane
Please tell me you are not actually a trucker driving on our public roadways!!!!
Umm ... if you think Biden/Harris give a fuck about anybody but themselves and their handlers you are indeed batshit crazy.
Also, you can't load\offload this coil laying flat without damaging it.
nice job. i would have went with 6 chains and a strap over the top of the red tarp thats a big coil
Very awesome tutorial......thank you very much
Dot does not state straps must be ran under the rub rail "whenever pratical" or any other time.
The rubber should be under the racks and folded under coil
I thought it was illegal to cross thread chains 👀👀
Actually, it's illegal NOT to! RTFM, which he even included!
No it is the most efficient way. If you horse shoe secure them it halves the securement strength and you have to use twice as many chains. If you didnt, your load would not be secured legally. They also cant be twisted together.
Right
Did he x chain both
DOT requires when crossing chains to have rubber or some sort of protection to keep chains from rubbing.
I'm gonna need a close up of that PVC pipe!
we supply lumber tarps/steel tarps, any interest, please feel free to let us know.
Audio kept going in and out on this video.
Good job. Where did the printed instructions come from?
From the government. DOT. Look it up and RTFM
Is not better chains in cross X. ?
2 chains????
Excellent job
Where is the friction mat that should be under the bunks
He put two matts down, watch it again and try to pay attention the next time.
like it so much
WHAT'S THAT LENGTH OF PVC YOU USED TO ATTACH A BUNGEE WITH ?? AN EXPLANATION OF IT WOULD BE APPRECIATED.
Whatever it takes, as common sense would dictate! AND STOP TYPING SHIT IN ALL CAPITAL LETTERS, DORK!!!
What’s the wll of those chains?
What's a wll? Working weight load? FAIL!
@@GonzoLarry working load limit
4700 lbs
No friction mates under the bunk and/or no tie down in front of the cradle?! You're not qualified to teach anyone anything. Fail!
"− A cradle (for example, two hardwood timbers and
two coil bunks) that is restrained from sliding by:
• Placing friction mats under the cradle
• Using nailed wood blocking or cleats against the
front timber
• Placing a tiedown around the front of the
cradle."
wrong
Binders are out dated and dangerous as hell...
All binders, snap binders, or just his binders specifically?
@@DaddysFastestSwimmer lol
Good video but audio is not too good,im just getting to flatbed after doing dry van for years
Hey BILLY Gomez: You are an idiot and dangerous as hell.
snap binders work but you can bend the handles causing the binder not to lock 100% inspect the binders. and yes they can be dangerous as hell.