AQUA BLASTING - FV432 APC
HTML-код
- Опубликовано: 31 янв 2024
- Its time to get the Aqua Blaster out and get the scabby paint off this FV432
We also load up the Stolly's to go to their new home with @BenoCam
Follow Bens Channel For more on these vehicles!
If your interested in the Applied Aquablaster 100l Extreme or the Applied Varimount. Please contact Sam directly on sam@appliedpi.com or +353 86 082 8835 (mobile) / +353 57 913 7929 (landline). Dealers/ distributors based in the UK and world wide.
Applied UK Ltd
Unit 90, Gibbons Industrial Park
DY6 8XF
Sales: 01384 279508
Email: sales@unitedabrasives.co.uk 
Авто/Мото
Hat tip to Adam's driving, especially that second Stalwart, that is far harder than he made it look.
‘Do you not normally chain anything down’? 🤣😂 Joe, I think that remark was close to getting you a clip round the lug.
That was Adam 🤣
Yes you're right that was Mr best
Adam was nearly wearing more chains than Mr T, for that crack.
I used to drive Stollies in the Army in Germany in 1989! Great memories ❤
Fluff in the glass.......remnants of paper labels off the bottles!! Great channel!!
Nice to think the empties are going to a great use. Will try to remove the labels next time!
No, it's the remains of Teddy Bears after the glass eyes have been crushed. It's what they use.
@@willtricks9432No! Poor Paddington!
@@I_Don_t_want_a_handle Thousands of them, Ruperts by the skip load, Winnie by the TON. Nasty. Still brings up the metal work a treat so well worth it.
@@willtricks9432 You beast!
Oh boy - just scrolling through my subscriber list to check what I can kick back to and relax and BAM - a new upload from you guys.
Perfect. All I'm missing is a beer.
🍻🍺🍻🍺🍻
You’re welcome 😉
This and Furze - well there goes my last hour of the day.
cant drink a beer doing the february challenge no drink
@@antoineroy5876 Thought it was meant to be 'dry January'?
If these are not on your list, consider adding them: On Fire Welding, IC Weld, Cutting Edge Engineering, Snowball Engineering, Western Truck and Tractor Repair, Bruce in AUS
I’m in 🇨🇦 and saw no ads. No blockers or anything, just no ads.
I've done this to caravan's before with crushed garnet rather than crushed glass (you can actually scoop that up again and get several uses out of it. My only recommendation is that a little bit of a prep goes a long way, covering the glass with some basic plastic just prevents little woopsies from becoming strange smears on every glass surface. Less glass on a tank than a caravan but might be wroth it for lights and mirrors, vision blocks etc.
Absolutely no adverts on my feed. 👍🏻
Joys of RUclips premium 😂
Same here 👍🇺🇸
@@wilkybarkid Joys of an ad-blocker 😉
Same
None for me, just CEE Australia videos next plays.
That was great Joe. Volunteering to be your AquaBlaster!! Fabulous loading job with the Stolly's. Cheers, John
Thanks for flogging the Stollys to Ben. I'd seen his diving on the tv but not discovered his youtube. The cornish mine vids are fascinating.
RUclips suggested i shop at lovehoney, clearly aware im neglecting my wife to watch a man paint strip a tank..
You have just sold me on the best truck chassis blasting system.
Just wanna thank you Mr. Hewes. I genuinely don’t get excited for channels to upload videos. But I wait for you to upload! Y’all definitely tickle that childhood curiosity I have about tanks
This is how British people work together if you try to be stuck up or stand on position in a British company expect to be taken down a peg or two.
@@womble321wut ?
Crickey hats off to getting the second Stalwart on couldn't be sure if it was Adam incredible skills with the telehandler 👍
I watch from Australia and no advertising on my iPad. Love your channel, it’s great to see that not only old war machines are recycled, I think you guys are daft, strongly loyal to each other and bloody good fun. Keep it coming chaps
The aquablaster looks like a really good bit of kit. I've done a lot of conventional wet blasting with a traditional pressure pot setup (mainly on boat hulls) but my concern was always drying out the inside of the pot when it was in storage. Had visions of the thing turning into some sort of missile through corrosion rotting the bottom out. Wet is definitely the best process for this kind of work though, especially when dealing with spurious old coatings. Really enjoy the channel, thanks for keeping us all entertained.
its always a good day when you wake up to a video from Mr Hewes keep up the great work
Just like to say that I am really enjoying your videos with your light hearted attitude and l find it amazing how you know so much. So basically looking forward to seeing the next video. Rich (retired building surveyor ) Ely UK
I was told when I worked at the REME workshops that they used to sand blast the hulls as part of the base repair, to relieve fatigue in the alloy.
The process you’re using certainly makes short work of cleaning them up, impressive 👍
I can honestly say I've never heard that one,and I served my time @ REME Central workshops
Should have been in the RAF then, we seemed to spend half our lives painting that couldn't run away from us😂😂😂
@@stewartbrown8115 REME Chilwell? That's where I served. It was just an odd comment that I was told as an apprentice by one of the guys who did the blasting. Looking it up, it is effective - not very though. It's something that stuck with me all these years.
@@garyphillips7993 yes i was at chilwell from 66 to 75,iI spent the last 2 years in the test house mainly on the meteor/meteorite rig
@@stewartbrown8115 I was there 73 - 85/86, made redundant under Maggies closure program. I did quite a lot of work in the test house when I was with the maintenance division - I worked with a guy called Aidy, I think his name was. Moved to the LAD, last few years spent as end of line examiner in the main workshop. Now retired & looking back at it all.
No ads on my feed, love the quick results of the water blasting, brilliant.
Excellent loading skills Mr Best!! You made a difficult load up look easy. 😎
Such rapid content. Amazing service, guys. 😊👍🏻
Just Aqua blaster add! Much enjoyed! Thanks for shareing!
Ty for the adventure back didn't hurt knuckles didn't get skint up lol I love the videos
The Aqua Blaster unit is an awesome bit of kit and so satisfying to watch it do it's thing.
Good bit of kit you've got there Joe far better than needlegunning for hours on end. As for adverts I got one after the outro for ladies hair straightening ! Possibly some link to Adams haircut ? 😁
Saw the stollies on the m5 today, good old caines they use to run some nice noisy trucks
I used to regularly drive through Chidoek. Big hills on both sides and speed cameras in the pretty village. There used to me a resident who went across the Pelican Crossing, then pressed the button and returned, He did that almost all day, every day.
Ha ha.I’m Dorset and yes I’ve heard of that guy trying to bugger up all the traffic. Wasn’t it Chidok where the lorry driver sacrificed himself when his brakes failed just past the escape lane and to avoid running over a line of near stationary cars in the village, he swung it into a cottage. I think a lady in the cottage died along with the driver, who could have walked away if he had gone over 20 cars! I saw the wreck in a garage alongside the 1944 Diamond T that pulled it out and up the hill. Horrific.@@stco2426
That’s aqua blaster is just amazing the work it does and the effort you need to put in is just beyond amazing
No Adverts appeared Joe. Great job with the Aqua Blasting Guys. 👍👍👍👍👍
Good bit of driving by Adam loading the stoles, think they might of been improved with a bit of blasting to.
If they did I don't think there would have been much bodywork left after blasting. 😂
You Brits have such fun toys. Figures anyone who produced the XKE would have great class.
It's so satisfying watching the aqua blasting. Such an awesome bit of kit!
Great timing, just fired up RUclips to this being uploaded 1 min ago! Looking forward to it👌
No adverts at all !!
Adblocker for the win ! 😇
That water blast machine is awesome
Man that water blaster is powerful, cleans multi layers of decades old paint and rust off in not much more than one medium pace pass.
Gamechanger!!💪👌👌
Bless it's little heart, that Stalwart is somehow running on only 3 cylinders 🤣
Normally the adverts are you tube premium but the funniest one was when Halfords popped up 😂😂
Very satisfying watching that Old paint come off , I knew a Guy in the 80's who did the Sand shot blasting an it was totally Messy , Spaceman suit everything ..Good vid.
Well the one and only ad is see on this fine channel might be that can of thatchers you so oftenly throw down your hatch but further no ads of any kind.
Keep up the good work i really enjoy this channel even with your program for the elevation disadvantaged people.
Love the t-shirts Jack
Cheers Joe. Stollies arrived safe and well. Should keep me busy for a while 😂👍👍
Can we expect videos ?
While he had the blaster running, could have given them the once over, eh?
@@andrewgray1949 The 2nd one might have ended up in several plastic bags and thrown in the back of the working Stolly.
@@jonb3311 BenoCam already has a stolly vid on youtube
Exactly what i was thinking@@andrewgray1949 he could have done a wee square on one and sent the clip to @BenoCam and said another 2k and i'll do the lot lol
Not kidding but you could pitch ‘tank restoration’ to the BBC as part of their slow TV series, I could watch it all day.
Noooooooo,don't let the BBC anywhere near. They would fill it full of political correctness and health and safety crap.
Don’t associate kids and the bbc ffs 😂
@@philleeson7835 have you seen how much politics they get into a three hour film without commentary about a barge travelling down a canal?
My advert was the tank museum 😂. Ironically I drive by it most days don’t need to be told about it 🙈. Keep up the good work 👍
Well done , that will look good when painted!🍺💪💪👍
Another channel i love watching is cutting edge engineering channel he has just got one of these blasters i would love ago ever need anyone to do any ill do it for free
Quality will go up in a few. RUclips is slow uploading sometimes.
It’s my rubbish internet
@@MrHewes no worries. Just letting the early people know before they freak out haha.
No ads whatsoever that’s why I love your channel keep it up great vids thank you.
Nil no adverts on my feed. Look forward to all your team efforts, many thanks.
I got an ad for sheep salt lick and sex lube…for reasons known only to the algorithm.
I frequently get ads for menstrual pads and make-up stuff.. or dog toys and food.. I'm a dude and don't own a dog.. which fortunately means google knows ef-all about me..
That aqua blast maching is a great bit of kit👌
As a German viewer, I actually get the same advertising as with other videos about new razors, insurance or video games. The radiance thing is really a good thing. You can always do this as a time lapse, it's good to watch and see the previous close up picture.
Another great video Mr. Hewes. All your patience and attention to detail will pay off. I haven't watched all your videos yet but I would use that Aqua Blaster on the engine and spare after I hosed it down with a case of engine degreaser! lol On the inside as well. But I know you guys know more about what you are doing than I do! Be safe, cheers, S
No Ads here, nice bit of aqua blasting 🤠
That aquablasting is the dogs, what a great finish ready for priming. Awesome vid again, thanks guys. No ads, running uBlock!!
Wow Very Impressed with that Aqua Blasting Machine made a very Job Look easy to get the APC ready for Paint Nice Thanks we Had Stalwarts in out battalion too
Wow that sprayer is brilliant. It should give you a good base for a great paint job. Happy customers = More business!
Depending on the abrasive used, the pressure, the metal underneath, you can get a stippling of the underlying metal (usually more for Aluminium than for Steel though). That sometimes needs to be sanded smooth before priming and painting. I don't think a tanks armour is particularly soft though so shouldn't be an issue. But sometimes, depending on the kind of quality paint job you want, you do need to do some prep afterwards. Still a hell of a lot easier than sanding or needle gunning off the old paint though.
Very satisfying that aqua blasting bit.
good to see you working man, thats a cool toy
Hi , I don't see any adverts . I watch every day brings back many memories .
Impressive piece of kit
Great to watch you all the Bentley scrambling in the field was a corker. The advert just through this was a crap heater and a Laser Blaster for steel
Love satisfying timelapses like this
Very informative. I didn’t know what aqua blasting was before this!
thats a really good bit of kit Joe and so quick 👌
I'm continually getting royal match from the play store. Great video again what an awesome result from the blasting on APC.
Fantastic channel, keep them coming - Re. Adverts, if I understand it correctly we should all be getting different ads - unless you are a recently retired time-served engineering manager, who’s been looking at buying a new car, planning a getaway to the Italian lakes and has looked at a new lawn mower recently - only spanner in their works is that me and my wife share an Amazon and Google account so I will get the odd one that relates to what she has been searching, like kitchens or bathrooms !
Having used a needle gun on parts for a steam ship, I'm in awe of that machine. Nice job!
No ads when I watch your stuff. Suits me just fine!
Great vid as always👌
Amazing technique with great finish 😮
I get no adverts at the start or during but at the end i get an auto express advert. Brilliant video by the way
Cracking vid. Great to see you got the blaster. Saw you demo-ing it the other month and it looks a proper bit of kit. Good on water and media and as quicker it'll soon pay for itself on compressor hours / less fuel etc. That it's also kinder on the metal and seems much safer to use is also fab. Nice drivin' on the 'foden'! Looking forward to more of the same, please!
I saw a hodiday ad. I think I'd rather come and help and if blasting then I'd create my own beach.
Very cool guys! And bluddy interesting !! 🤔😁
It was just by chance that i came across this channel, you blokes remind me of a series i watched called Tank overhaul ,great stuff as i remember , fabulous restoration and trouble shooting skills top blokes all round ,i used to work in industry as a shot blaster and have used the small cabinet grit blasters for detailed work on torsion bar splines ,happy days :}
nice thing A Aqua Blaster
and a great job
Thank you for another enjoyable upload.
I only got two adverts come up - one for the Blue Lagoon Massage Parlour, Stoke on Trent and the other for Uncle Sam’s Spitting Python Roadshow. The aqua blaster made neat work of the APC in next to no time. Impressive bit of kit especially considering the minimal amount of mess. Nifty bit of telehandler driving too.
nice video, watching from Washington State USA. i liked the truck just behind the APC
Big fan of Mr Hewes here. Recommend these quality creators: On Fire Welding, IC Weld, Cutting Edge Engineering, Snowball Engineering, Western Truck and Tractor Repair, Bruce in AUS to add to your subscriber list.
Having just spent 10 days hand scraping old antifouling off a 32 foot hull, I fair envy you the aquablaster. I mainly get games adverts on here and bizarrely this past week ladies' sanitary products. So much for intelligent targeting.
Awesome guys thanks.
No ads. Great work.
It does such a good job of cleaning all the paint and rust 👍👍🇦🇺
No adverts here. US based viewer. Aqua blast is very nice, well done. Cheers
Watching from across the pond... got a vrbo ad, then harbor freight, then Nureva after the vid. Cheers!
Cracking job sir...
That design Adam blasted into the side of the FV looked like a Gothic arch motif...😁
The ads I see range all over the place...home improvement, cars, local government and healthcare. The ads we see must depend on where we are (or where YT thinks we are).
got to say Adam did a damn good job loading that second Stolly ( especially as he couldn't really see where the front wheels or the ramp were )
@PartridgeExteriorCleaning has some new competition. Very satisfying to watch. Keep the videos coming they are great fun to watch 👍
Waiting every day for à New video to enjoy! Always entertaining and educating!
Mitsubishi pickups and cruise adverts, neither of which I want. AI got that wrong. Always enjoy your work, thanks for making a great RUclips channel.
sad to see the stollys moving on. something very sci-fi about them. great looking transport.
Joe that is one good tool ! Great video !
Great video, thank you
Great channel, really enjoy the banter too.
Dear Joe,
Happy to see that you started restoring the FV432 British APC because to my opinion this army vehicle is worthwhile to do so. That you brought the 2 Alvis Stalwarts to an auction isn’t a bad idea at all because to my knowledge there are a lot more left of these but I’m not sure.
I look forward to your next vlog and send you love from the Netherlands
Zie ik je niet bij milo voorbij komen elke dag, kom ik je hier weer tegen, lol. M.v.g. Ruud
@@ruudvanschijndel hoi Ruud, het is niet uitgesloten dat je me op meer kanalen tegen komt en ieder kanaal waar ik op geabonneerd ben krijgt na elke vlog een comment van mij. Grtj,Dick
Great video, as always! Can’t wait till the next!
USA, Ads for Native body wash and Chick-fil-a.
Great video. Rather relaxing i thought. 👍
Great ! ...all that Chrome 6 paint in the environment !
There goes most of the armour protection!
Paint made up about 10mm of the armour plate on the old biscuit tin.
Got an advert for Domino’s! Fab job on the 432