Fix car starting problem due to low output voltage from alternator | Replacing alternator slip rings

Поделиться
HTML-код
  • Опубликовано: 5 июл 2022
  • The most common reason an alternator is not charging the battery is due to worn carbon brushes or a damaged alternator itself. If the slip ring is damaged, the output voltage will drop or cut and the battery will not be charged. This causes starting problem for the vehicle
    Alternator problems can affect your vehicle in different ways.
    * CHARGE indicator light comes on,
    * Engine is hard to start and cranks slowly, or doesn't crank,
    * Battery demands lots of water,
    * Alternator makes noises,
    * Headlights suddenly go dim.
    These and other problems may be caused by a fault in the charging system.
    Before start replacing components with the hope of fixing the problem, need to determine which component or components are causing the trouble. Often, it is possible to diagnose and solve the problem on your own using a few simple tests and tools.
    The sooner you find out what is causing trouble, the better. You'll prevent a faulty component from ruining other parts in the system, which would make your repair more expensive.
    #CarStartingProblem
    #AlternatorIssues
    #LowVoltageFix
    #CarTroubleshooting
    #AlternatorMaintenance
    #DIYAutoRepair
    #CarElectricalProblems
    #FixMyCar
    #AutoRepairTutorial
    #AlternatorReplacement
    #CarMaintenance
    #StartingIssues
    #AutomotiveElectrics
    #CarBattery
    #ElectricalSystemRepair
    #FixItYourself
    #CarDIY
    #CarProblemsSolved
    #AutoElectrical
    #AlternatorSlipRings
  • НаукаНаука

Комментарии • 12

  • @danilojr.penalosa2506
    @danilojr.penalosa2506 16 дней назад

    Thanks new subs

  • @CVEIWKID
    @CVEIWKID Год назад +4

    Thanks

  • @marthenkarel22
    @marthenkarel22 10 дней назад

    Pada kedua kutup kabel pada selip itu bisa di bolok balik kah.?

    • @bigvmedia
      @bigvmedia  9 дней назад

      Ya, Anda dapat membalikkan kedua kutub slip ring. Namun jangan membalikkan kabel keluaran alternator ke aki

  • @plllot9713
    @plllot9713 Год назад

    16:23 bashing the bearing in by its outer race...good luck with that.

    • @bigvmedia
      @bigvmedia  Год назад +2

      It was very loose. It had been removed once before. Then, it was taken to shoot the video.

  • @scottlanier5133
    @scottlanier5133 Месяц назад

    Dremel that stuff off

  • @RestartSimferopol
    @RestartSimferopol 5 месяцев назад

    Its wrong, don't do like this

    • @bigvmedia
      @bigvmedia  5 месяцев назад +3

      Anyway, still running for a year and a half with no problems. Around 21000 kms. 😊 Also, whoever has money can buy a new one. Then instead of just 3.590 US dollars, you have to pay close to 119.67 dollars.