Very nice line shaft powered shop! Keep an eye on the little fella. He's lucky to have a dad-grandpa like you. Introduced at an early age. I'm building a machine shop that's just about complete. Nothing is guarded so awareness at all times! I really enjoyed your video. Make more!
My grandfather had a wood mill in Philadelphia, Pa. in the late 30s, early 40s. It had a coal fired steam engine and ran belts up three story's. They made high end display cabinets for all the major department stores and shipped them all over the country. The name of the mill was England and Miller. When my father would take me there the belts, wheels and noise would scare the hell out of me.
All the safety comments noted and agreed. I noticed this was 2 years ago, why no more videos? I encourage you to take a look at Dave Richards Old Time Steam Machine Shop and see some of the things he's shared. Plus your young assistant is now likely almost a teenager and would likely enjoy videoing and posting a lot of what goes on at the shop? Regardless thanks for sharing your little corner of historical heaven.
After seeing a small outdoor wood shop in Silver Dollar City, I wanted to see how it would work on a larger scale, this shop is fascinating! It would definitely require a lot more awareness than most carpenters have these days... it's not like you could have a sawstop cut power in milliseconds here, lots of momentum in that system.
I'm trying to setup my 1st lineshaft powering a table saw. Where can i learn about the bearings the shaft goes thru. My bearings are marked BG and it seems the shaft turns in a oiled cast iron bore. Is this correct? See my last video. thx.
This is an excellent video representation of a line-shaft. Would you allow the North Berrien Historical Museum access to this video for exhibit purposes?
nbhsmuseum please know that you are more than welcome to use this in any way you See fit. Fine Woodworking Magazine also did a video of the shop - Not sure what their policy. please know also that you are welcome anytime to visit the shop if you might be in the Zeeland area. Thanks so much, Bob Berghorst 616 926-4599 blberghorst@hotmail.com
It is indeed a picker - this one came out of Baker Furniture in Holland Michigan and was used to the pull (card) the long mane and tail hair ( horse) for upholstery. Thanks, Bob
There are efficiency issues regarding friction loss due to all the belts and pulleys plus if this were a modern show it would be and OSHA nightmare.... Infact this even existing these days they must be running the shop of burning OSHA manuals, hence my love for it. Make no mistake I prefer the sounds of this shop over that of the screeching of a router or any other electric motor. Personally I would love to build a shop like this where it's a violent collision of old and new. So like modern dust collection and safety, but vintage machines.
Its only dangerous if you're stupid and not keep full awareness of your surroundings when comes to these 19th century workplaces. Its common sense and you couldn't exactly be picky on where you work back in those old days.
That is a horse.hair picker. these were used to pull or "card" the long hair from the tails and manes of horses and separates these from the short hair and debri that came from the slaughter house. The long hair was used for stuffing in upholstery.
Although the machines, line shafts and counter shafts are all collected from various factories, the shop as a whole would be representative of a turn off the century shop.
Either, I am not crazy for wanting a shop like that... Or I am, but there are others just as crazy. Love it!
Very nice line shaft powered shop! Keep an eye on the little fella. He's lucky to have a dad-grandpa like you. Introduced at an early age. I'm building a machine shop that's just about complete. Nothing is guarded so awareness at all times! I really enjoyed your video. Make more!
Very nice shop you have, thank you for posting. If those machines could talk...wow, what a history lesson that would be!
Really appreciate you taking the time to post this video, What a fascinating shop
What a beautiful shop. I am extremely jealous
Amish have been doing that same concept, and still doing it. No matter what it's so cool to watch. Thanks for sharing your shop.
My grandfather had a wood mill in Philadelphia, Pa. in the late 30s, early 40s. It had a coal fired steam engine and ran belts up three story's. They made high end display cabinets for all the major department stores and shipped them all over the country.
The name of the mill was England and Miller. When my father would take me there the belts, wheels and noise would scare the hell out of me.
Oh wow this is great! Gave me a big smile watching this.
I love the idea of a steam powered wood shop. Woodworking produces a lot of scrap waste toss into stove for boiler.
this is extremely impressive
Very very nice shop you've built - keen follower of steam powered machine shop, yours is just as interesting - very nice job.
Love the sound 🤜🏾🤛🏻
Wow INCREDIBLE!!!!
All the safety comments noted and agreed. I noticed this was 2 years ago, why no more videos? I encourage you to take a look at Dave Richards Old Time Steam Machine Shop and see some of the things he's shared. Plus your young assistant is now likely almost a teenager and would likely enjoy videoing and posting a lot of what goes on at the shop? Regardless thanks for sharing your little corner of historical heaven.
Beautiful and impressive. Thanks
Thanks for sharing this video of your 'ol arn!
Absolutely beautiful
After seeing a small outdoor wood shop in Silver Dollar City, I wanted to see how it would work on a larger scale, this shop is fascinating!
It would definitely require a lot more awareness than most carpenters have these days... it's not like you could have a sawstop cut power in milliseconds here, lots of momentum in that system.
Fantastic shop
Nice
Beautiful sound.
Ist aaaa wonderful
I'm trying to setup my 1st lineshaft powering a table saw. Where can i learn about the bearings the shaft goes thru. My bearings are marked BG and it seems the shaft turns in a oiled cast iron bore. Is this correct? See my last video. thx.
Impressive.
grand rapids michigan, thats my hometown. lots of furnature making history here!
Anyone could tell me what is the main distribution shaft rotating speed?
Very dangerous settings but looking good
This is an excellent video representation of a line-shaft. Would you allow the North Berrien Historical Museum access to this video for exhibit purposes?
nbhsmuseum
please know that you are more than welcome to use this in any way you See fit.
Fine Woodworking Magazine also did a video of the shop - Not sure what their policy.
please know also that you are welcome anytime to visit the shop if you might be in the Zeeland area.
Thanks so much,
Bob Berghorst
616 926-4599
blberghorst@hotmail.com
is it a museum or a working shop? It is very nice either way.
Cool.
What is the machine to the left at 1:39? It looks like a picker used for processing wool?
It is indeed a picker - this one came out of Baker Furniture in Holland Michigan and was used to the pull (card) the long mane and tail hair ( horse) for upholstery.
Thanks, Bob
i would hide a bunk in the corner and never leave
Dan/Bob what is the machine with rounded cover at 1:45 on the left side?
I was wondering the same thing. It looks like a wool picker
what year is this shop from ?
Can’t tell me you couldn’t design that yourself using modern methods and materials... still run it of a H/M engine. Steam water hell even wind!!
they dont make em the way they used to,
There are efficiency issues regarding friction loss due to all the belts and pulleys plus if this were a modern show it would be and OSHA nightmare....
Infact this even existing these days they must be running the shop of burning OSHA manuals, hence my love for it.
Make no mistake I prefer the sounds of this shop over that of the screeching of a router or any other electric motor.
Personally I would love to build a shop like this where it's a violent collision of old and new. So like modern dust collection and safety, but vintage machines.
pppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp
EXTREME DANGEROUS ...WHE THE LIFE OF PEOPLE DONT'S HAVE A VALUE.
Its only dangerous if you're stupid and not keep full awareness of your surroundings when comes to these 19th century workplaces. Its common sense and you couldn't exactly be picky on where you work back in those old days.
That is a horse.hair picker. these were used to pull or "card" the long hair from the tails and manes of horses and separates these from the short hair and debri that came from the slaughter house. The long hair was used for stuffing in upholstery.
Although the machines, line shafts and counter shafts are all collected from various factories, the shop as a whole would be representative of a turn off the century shop.