Thank You Sir for this! Very well explained....I've been wrestling with how to measure up my yard with distances as well as elevations - enter the Stadia Lines and formula, which I didn't know about. I tested it out on a 45' distance this evening and was within 1/4" - simply amazing!
Older instruments (I like vintage gear) have their level vials affixed by screws to the telescope. I have found that using these two screws as a sight line, I can use that to find my target well enough to see it in the scope. So even if you don't have a sight, you can still improvise a means of doing so. of course, they also have four leveling screws so were a bit harder to true up...
The field artillery has been using aiming circles for decades. The leveling of this piece of equipment is the same. Good instructions. The primary difference is direction. I thought that this piece would enable the location of magnetic north but apparently it does not. I'll have to do more research on theodolites. Never used civilian equipment before but I am well versed in aiming circles and GLPS systems which enable location.
.It is notable that in various instructional materials on level setup, the 360-degree circle is frequently overlooked without any explicit mention of its significance. The absence of acknowledgment regarding this crucial element may create a misconception that it holds no relevance. However, it is imperative to recognize that the 360-degree circle plays a pivotal role in the functioning of the instrument. Understanding its purpose is fundamental for achieving accurate and precise measurements, and it is advisable to incorporate comprehensive explanations of this component in instructional content to ensure a thorough understanding among users.
Sir, I am doing a building and construction course and in the course we are taught how to use the dumpy level; that made me interested in acquiring one to use it on site, to setout the building, and for landscaping, drawing contour lines on a site plan, etc, would you please advise me as to what would be the best, entry level, cheap but accurate, dumpy level? I have been looking at the Topcon, and the Leica as well as the Bosch, except for the Bosch, the others seem a bit expensive for a student. Which one would you recommend, please? The next question, is wether the Dumpy level has now become obsolete due to the laser levels. Again, would you be kind enough to tell me whether laser levels are dangerous on the construction site, because of the possibility to accidently train the beam on someone's eyes? I was told by our teacher, that the most accurate level, is the dumpy automatic level, that lasers are not as accurate and outside are difficult to read, and therefore requires extra investment in a laser detector. Can you please advise, Sir? Regards, Franklin
How much do you think is a fail hourly wage for someone like me that is reaching my 60 day probationary period in Florida. I'm learning have been learning and making progress setting up the instruments and reading the level rod. I'm always early. To ask for a raise is honestly a bit scary. Thanks for the tutorials!🙂
This is one of the best how-to videos I've watched on RUclips!
This video is excellent. Focused, concise, well presented, it was clearly well thought out too. Exactly what I need. Thanks very much
Ian Simpson
You're helping someone out here land a job. Thanks!
Very ,very helpful. First video I've watched that had all the steps explained clearly in detail, especially using the leveling knobs. Thanks so much.
Very clear instructions with great closeups - appreciate the detailed explanations
thank you
I Hope you have a really nice life because you just saved me from the hardest thing I've ever had to do .
Thank you for explaining in such a detailed way.
I think I got it now.
Thanks again.
Brilliant Todd! ThankYou .very patiently and accurately delivered. Regards 🦘✌️
Thank you Sir, I will see this video repeatedly untill I fully understand
very comprehensive tutorial ever thank you
Thank you for this video. I learned a lot and can now set and operate my optical level efficiently.
Wow this video is excellent. Very well explained.
Thank you so much
Incredible video. Very helpful, thank you.
Very nice way to teach. Keep it up.
This was explained way better than in college
Excellent teacher Thanks so much
Thanks for your excellent video.
Woow What a Professional video!
this is what i have searched for in levelling thankyou sir...
Thank You Sir for this! Very well explained....I've been wrestling with how to measure up my yard with distances as well as elevations - enter the Stadia Lines and formula, which I didn't know about. I tested it out on a 45' distance this evening and was within 1/4" - simply amazing!
Very super explaining. Keep going sir
Keep it coming Todd...bravo!
Older instruments (I like vintage gear) have their level vials affixed by screws to the telescope. I have found that using these two screws as a sight line, I can use that to find my target well enough to see it in the scope. So even if you don't have a sight, you can still improvise a means of doing so. of course, they also have four leveling screws so were a bit harder to true up...
Thanks. This will come in handy when setting rough grades.. too blind for exacts, so will leave that to the professionals
I think u explained me better than my lecturer 😙😁😁😁
Thank you so much for your video
Wow ...well explained
Thanks for useful tips.
Thank you Sir
For providing helpful video
Thank you sir your video is helpful😁😁😁
very helpful and easy to understand
So Helpful ... Thanks :)
excellent video sir
Good job, please can you recommend any books to read
Great video sir🔥
Some great tips
The field artillery has been using aiming circles for decades. The leveling of this piece of equipment is the same. Good instructions. The primary difference is direction. I thought that this piece would enable the location of magnetic north but apparently it does not. I'll have to do more research on theodolites. Never used civilian equipment before but I am well versed in aiming circles and GLPS systems which enable location.
.It is notable that in various instructional materials on level setup, the 360-degree circle is frequently overlooked without any explicit mention of its significance. The absence of acknowledgment regarding this crucial element may create a misconception that it holds no relevance. However, it is imperative to recognize that the 360-degree circle plays a pivotal role in the functioning of the instrument. Understanding its purpose is fundamental for achieving accurate and precise measurements, and it is advisable to incorporate comprehensive explanations of this component in instructional content to ensure a thorough understanding among users.
Thank you so much!
excelent video
Really
Very Good explan you
I like your video.
Thank you sir super video
Really helpful video! Can you do something similar for a total station?
Mujtahid Mamoon Ali
pov you are civil engineering student and u have surveying test tomorrow
really helpful
exellent. thanks
Thanks a lot
thanks a lot sir for your valuable knowledge
nice video
very Good... I like,...
Gosh you sure are smart.
angular horizontal hair in auto level. What is it's use
Having the fine leveling screws adjusted in the center should be mentioned at the beginning just saying watching instruments being set up for years
Sir, I am doing a building and construction course and in the course we are taught how to use the dumpy level; that made me interested in acquiring one to use it on site, to setout the building, and for landscaping, drawing contour lines on a site plan, etc, would you please advise me as to what would be the best, entry level, cheap but accurate, dumpy level?
I have been looking at the Topcon, and the Leica as well as the Bosch, except for the Bosch, the others seem a bit expensive for a student. Which one would you recommend, please?
The next question, is wether the Dumpy level has now become obsolete due to the laser levels. Again, would you be kind enough to tell me whether laser levels are dangerous on the construction site, because of the possibility to accidently train the beam on someone's eyes?
I was told by our teacher, that the most accurate level, is the dumpy automatic level, that lasers are not as accurate and outside are difficult to read, and therefore requires extra investment in a laser detector.
Can you please advise, Sir?
Regards,
Franklin
Is setting up over a point next?
How much do you think is a fail hourly wage for someone like me that is reaching my 60 day probationary period in Florida. I'm learning have been learning and making progress setting up the instruments and reading the level rod. I'm always early. To ask for a raise is honestly a bit scary. Thanks for the tutorials!🙂
very professionel thanks
thanks.
This is damn helpful.... Tnku😊
Sir shall you make videos on theodolite and total station
what a legend
Thank you
good level
thanks
excuse me sir can you please add the procedures for contouring
Prices
thanx sir u r great sir auto level . but plz sir h.i difine
ăn tết vui vẻ nha
Nice
nice
When autolevel is preferred over other instruments
Please eyepiece remove & fixing vedio send.
Bubbles do not employ "gravity".
All surveyors work off the same benchmarks and assume vertical lines are parallel.
more info about survey instrument, please visit our website, thanks www.versindo.id
hi
Please skip all the useless crap to 6 minute time.
Thanks
Prices