how do I keep my pinion gear and spur gears from breaking. I go through more gears than I do driving it. I even put the gear ratio where they supposed to be.
If you haven't found problem yet your pinion gear probably comes loose. Out the box both gears were gone in abt 15min. Only had truck 3 days this truck was too expensive for stupid things like that to happen. Good luck
nices vid helped me out alot i have a x-maxx 8s i took the stock traxxas esc out there no good and put in a hobby wing max6 esc so much better i went with 12t pinion and 30t spur gear got my gears made by b&m r/c racing really good gears
Hi, i have change the gear to 25/46t but im not sure about the pin system how its programing. The pins are on D on left side and D on right side? Is it correct? Will i need fan for the lipos only and not for the esc?
Hi im affter some advice just orderd my xmaxx.. my current lipos have deans fmale Connectors from my hpi savage.. what connectors do i need to solder on to use on traxass?
Old video... Hobbywing Max6 ESC is the one to go with... Max5 if you want to go with some big aftermarket motors but it requires more modification for mounting.
I’ve learned you have to do your own trial and error. You see someone one RUclips do something then you do it it, it doesn’t work so hot. I agree with the twin fans.
Tough choice dude either of the trucks are fun I personally love my Traxxas but the would buy a Axial xl because I also like axial stuff .. Your choice buddy 😀
yes mate thnx for the advise i was thinkin of gettin one so all the knoledge i can get on um the better.great chanel by the way makes a change that your enlish.lol.
WFO gear company is pathetic. Small company in Washington state. They don’t respond to emails period. No phone number to call them. Spend your money somewhere else. Last 14 months completely out of stock for their gears. Their steel manufacturer shut them down
Yea, it was a little weird, him telling us what the solution is, then saying he hasn't actually even tried it yet. Then how would he know it's even the right solution?
dougie doug the x maxx man its so strong but the esc is not i think the motor sucks 2 you buy that truck just buy a better esc and you will not drain your pocket the castle kit is 454.00 than the kersaw kit and gears not cheap if you do just buy a better esc im crazy and spend all this money but you dont haft 2
I swear people can be so stupid with gearing. Just bc the car didn’t stop them from overheating the motor they think it’s not overheated and is fine. Then 3 months later wonder why the motor blows up
Fuck that get rid of that garbage esc shit over heats after 15 min of running happened to me plenty of times got my self a combo deal monster momba X 8s 2028 800 kv motor problem fix !!!
i want to be the guy that got all i mean the little guys to grow to 1000 thats me im that guy it wood be so cool to be at 1000 subs but it wood be even cooler to get all those guys that are working just as hard or harder to get something for it granted its not much but every little bit counts
WFO gear company is pathetic. Small company in Washington state. They don’t respond to emails period. No phone number to call them. Spend your money somewhere else. Last 14 months completely out of stock for their gears. Their steel manufacturer shut them down
Kasa Pa well, if you want a all steel buy a real scale car, rc car is for fun and if you don’t know, all rc like this at this price have minimum 1 piece of plastic on it.
Well, if you don't know, 1:1 scale cars (real scale???????) have plastic components as well. Don't worry, I know quite well what am I talking about when it comes to rc and I am having a lot of fun with my car and no I am not breaking any parts just from accelerating -.-
thank you mate how about for reliability out of the two
What are the ESC fans? I understood 30mil
Search eBay 30mm 5v JR connector for ESc and BEC 😀
how do I keep my pinion gear and spur gears from breaking. I go through more gears than I do driving it. I even put the gear ratio where they supposed to be.
If you haven't found problem yet your pinion gear probably comes loose. Out the box both gears were gone in abt 15min. Only had truck 3 days this truck was too expensive for stupid things like that to happen. Good luck
did the fans work do you have the video of you running it with the fans thanks
do you have part #s for cable and fans you used
Did it work? You haven’t made another video on it. I’m putting trenchers on mine and am really wondering about gearing
I'm picking up a X MAX this weekend what would be pinon gear for 8s with getting a lot heat.
nices vid helped me out alot i have a x-maxx 8s i took the stock traxxas esc out there no good and put in a hobby wing max6 esc so much better i went with 12t pinion and 30t spur gear got my gears made by b&m r/c racing really good gears
If I change my pinion to 18 on my xmaxx do I have to change spur to or can I leave spur alone
Hi, i have change the gear to 25/46t but im not sure about the pin system how its programing. The pins are on D on left side and D on right side? Is it correct? Will i need fan for the lipos only and not for the esc?
Should the fans be push or pull?
Hi im affter some advice just orderd my xmaxx.. my current lipos have deans fmale Connectors from my hpi savage.. what connectors do i need to solder on to use on traxass?
Sir, how do you instal the cooling fans to the ESC?
Danny Binda hi just plug into the free channel on your reciever or use a y connector ok
Mark Jordan RC channel thanks!!!
Old video... Hobbywing Max6 ESC is the one to go with... Max5 if you want to go with some big aftermarket motors but it requires more modification for mounting.
I’ve learned you have to do your own trial and error. You see someone one RUclips do something then you do it it, it doesn’t work so hot. I agree with the twin fans.
I ran 17 and had no issue
hey what one would you have Yeti xl or the Traxxas x Max what is the best to go for
Tough choice dude either of the trucks are fun I personally love my Traxxas but the would buy a Axial xl because I also like axial stuff .. Your choice buddy 😀
i like slow trail trucks 2 there so fun love walking with them in the woods so fun but going fast i love that 2 i just love building strong rc rigs
Good informetid video. Whould be nice to see how you mounted the fans :D
12s, no wonder it's getting hot. Out of the box they do 40 on 8s. Over volted!
6s dude .. switching Parallel
Your esc will do nothing on 12s
Found the Fans. What's the brand or part of the Y cable?
Steven Sanchez. he hasn't responded. Smh I asked a similar question
yes mate thnx for the advise i was thinkin of gettin one so all the knoledge i can get on um the better.great chanel by the way makes a change that your enlish.lol.
No more fans are needed! Remove ESC heatsink add thermal paste. And Done! Do the same to the motor. You’ll drop temps off like crazy.
Can I have the part numbers for the gearing plz and I will order them funs as well ty for the upload
WFO gear company is pathetic. Small company in Washington state. They don’t respond to emails period. No phone number to call them. Spend your money somewhere else. Last 14 months completely out of stock for their gears. Their steel manufacturer shut them down
is this 6s I'm assuming??
B&C Ultimate RC it’s gotta be no way it’s that slow on 8s
How can you make a video like this then not list the items used.
Sir just a little advise, try your idea and film it first, let us see how it worked. And then find a better title for the video.
Yea, it was a little weird, him telling us what the solution is, then saying he hasn't actually even tried it yet. Then how would he know it's even the right solution?
Any links to the was fans? Pls
nice subscribed
Is that a vxl6 esc or the 8s esc?
It’s the 8s esc off the version 2 Xmaxx 👍
how do u mount the fans there?
Between the two support bars which run along side the motor use zip ties to attach them👍
@@markjordan do they really help that much?
Hi yes totally it prevents the motor from getting too hot 👍
Did they stop the thermal shut down???
dougie doug the x maxx man its so strong but the esc is not i think the motor sucks 2 you buy that truck just buy a better esc and you will not drain your pocket the castle kit is 454.00 than the kersaw kit and gears not cheap if you do just buy a better esc im crazy and spend all this money but you dont haft 2
U didn’t show us how to do it
allthough fans dont like water.i always end up splashin then realise the fans on.my castle one is aboot fookt .an its only bin splasht a bit
I cooked my stock 1200xl vxl motor on my V3 8S xmaxx 2 weeks ago that I bought a month ago. Stock gearing... 18/54
I bet u didn’t hav fans
@@Mustyweed Oh I had fans. The truck was literally brand new out of the box. Took her to the sand dunes and gave it hell!!!
Drink a shot every time he says 'eeeuuhh"
What kind of chips you talking!!?? I've seen some expensive chips
The Traxxas Esc In my opinion kinda sucks, once you get a hobbywing you never look back.
I swear people can be so stupid with gearing. Just bc the car didn’t stop them from overheating the motor they think it’s not overheated and is fine. Then 3 months later wonder why the motor blows up
Wanna play a game let’s count how many times he says ahh lol jk
Fuck that get rid of that garbage esc shit over heats after 15 min of running happened to me plenty of times got my self a combo deal monster momba X 8s 2028 800 kv motor problem fix !!!
i want to be the guy that got all i mean the little guys to grow to 1000 thats me im that guy it wood be so cool to be at 1000 subs but it wood be even cooler to get all those guys that are working just as hard or harder to get something for it granted its not much but every little bit counts
do this it great but i never did it befor but i am going to. so you do it. what lol
He must have tiny hands that truck is not that big 🤣
WFO gear company is pathetic. Small company in Washington state. They don’t respond to emails period. No phone number to call them. Spend your money somewhere else. Last 14 months completely out of stock for their gears. Their steel manufacturer shut them down
PRACTICALLY DOES NOT EXPLAIN HOW TO CHANGE THE SPUR -JUST TALKING -VERY BAD
Another tip to prevent the overheating and having additional problems is to never buy a Traxxas vehicle because they are plastic shit...
Kasa Pa well, if you want a all steel buy a real scale car, rc car is for fun and if you don’t know, all rc like this at this price have minimum 1 piece of plastic on it.
Well, if you don't know, 1:1 scale cars (real scale???????) have plastic components as well. Don't worry, I know quite well what am I talking about when it comes to rc and I am having a lot of fun with my car and no I am not breaking any parts just from accelerating -.-
Plastic is better then aluminum or steel they bend and break you idiot
Fox Lyfe calm down child.
@@Make-Asylums-Great-Again immigrant