There are heat complaints in this case, I recommend the KXRORS S300. Several nice builds with that. It fits the ID-COOLING IS-55 cooler which fits into that case and is a leader in SFF performance as long as you have the clearance over ram or vrm heatsinks (flipped the other way) to install it.
I wish people realizes that these small cases always be worse in terms of thermal as a tradeoff for portability, if people want a nice thermal performance and will not need to move around their PC occasionally they should've gone with normal big PC case with multiple fans placement. Thermal sucks since there's no intake & exhaust fan and this case (and many low volume cases) relies on passive ventilation to pass the air, but you can install fans inside if you want, smaller fans like around 4x4x1cm or smaller is good enough. My AMD Ryzen 3600 + 6600xt oc runs at around 75C inside the PCCooler I1000 case, no undervolt. Should be be better once I install my Nidec fans.
Were you running this build with the sides off? Sides on gives me a weird whistle like noise, and send temps up. Have you done testing with sides off to see temp difference?
Which case is this? I have a similar setup with a 5700x/6700xt combo and that same board. Would love to reduce the size of the ROG z11 case in currently using
@@rgeregil I bought the same motherboard for my itx-build and had to reflash the bios for my 5700g. I don't particularly trust reflash buttons so I put my old 3400g in first and flashed it that way.
I see you’re using the same CPU cooler that I am. Is yours having an issue where the fan blades gently scrape along the side panel as well? I have the metal side panels and depending on how fast the fan spins, it’ll sometimes scratch against the side panel
On the "cage" that the PSU attaches to... is it possible to attach a 2.5" SSD there? I was really hoping it would be possible so I may have additional storage
Thank you for your kind words! I'd be happy to help you with your minimalist build using the Tecware Fusion case. Minimalist builds can look really sleek and clean. What specific assistance do you need? Are you looking for advice on component selection, cable management, or any other aspect of your build? Feel free to share more details so I can provide you with the most helpful information.
I'm planning on building this kind of pc with the same case. Just wondering how the temps is so far. Do you recommend this case if I will be using it for mostly gaming?
did you use the stock fan from ID Cooling IS-60 Evo? since it's 64mm and the case spec said it only support 60mm, does the fan touches the acrylic panel? Thank you.
@@rgeregil Woah that's an IS-60? How much mm is there left? According to caseend, CPU cooler max height for this case is 60mm, isn't the IS-60 like, 64mm?
@@jeromevaldres NONE 😅 rubber dampener touches the cover, bulges a mm or two, you wont notice it until you look very closely; still I think it varies on how well the case was assembled by the factory.
i see you’re using the same CPU cooler that I am. Is yours having an issue where the fan blades gently scrape along the side panel as well? I have the metal side panels and depending on how fast the fan spins, it’ll sometimes scratch against the side panel
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I've been considering building something like this for the past two months. Your computer looks really awesome!
There are heat complaints in this case, I recommend the KXRORS S300. Several nice builds with that. It fits the ID-COOLING IS-55 cooler which fits into that case and is a leader in SFF performance as long as you have the clearance over ram or vrm heatsinks (flipped the other way) to install it.
I wish people realizes that these small cases always be worse in terms of thermal as a tradeoff for portability, if people want a nice thermal performance and will not need to move around their PC occasionally they should've gone with normal big PC case with multiple fans placement. Thermal sucks since there's no intake & exhaust fan and this case (and many low volume cases) relies on passive ventilation to pass the air, but you can install fans inside if you want, smaller fans like around 4x4x1cm or smaller is good enough. My AMD Ryzen 3600 + 6600xt oc runs at around 75C inside the PCCooler I1000 case, no undervolt. Should be be better once I install my Nidec fans.
the side panel i got was frosted even though it showed it as fully transparent :/
hey which riser cable did you use for this build and after a few years how do you like the case?
Were you running this build with the sides off? Sides on gives me a weird whistle like noise, and send temps up. Have you done testing with sides off to see temp difference?
Which case is this? I have a similar setup with a 5700x/6700xt combo and that same board. Would love to reduce the size of the ROG z11 case in currently using
Man just straight skipped the gpu size part
did you update the bios first?
is it possible to fit 40-60mm fans on top as an exhaust?
I wqoudl say just looking at this video its pretty clear there is zero chance for that.
@@ehohackner i mean it's 40mm it's so small, i think it Will fit, just cable management issues i think
why my acrylic board is not clear like in this vid. 😢😢
me too
Will the id cooling is-55 fir in this case?
The cpu cooler flow with direction?
Hey I was wondering if the case comes with a audio Jack plugin for a headset it would help if you could reply thanks
No
Hi! Im planning to buy sane case, same mb and same cpu as you. Do you had to fo a bios update for this combo? Or do the mb came ready for 5000?
mobo came with updated bios
@@rgeregil I bought the same motherboard for my itx-build and had to reflash the bios for my 5700g. I don't particularly trust reflash buttons so I put my old 3400g in first and flashed it that way.
There is no space for ssd 2.5?
I see you’re using the same CPU cooler that I am. Is yours having an issue where the fan blades gently scrape along the side panel as well? I have the metal side panels and depending on how fast the fan spins, it’ll sometimes scratch against the side panel
what name of the cooler?
On my case it doesn't, since the acrylic cover has a slight bend.
Did you use a gpu to boot ryzen 5 5500?
On the "cage" that the PSU attaches to... is it possible to attach a 2.5" SSD there? I was really hoping it would be possible so I may have additional storage
you can, just zip tie it so it won't move around while carrying
@@rgeregil Is there enough space for that behind the GPU if the GPU goes all the way to the end?
Where did you find the glass cover for the case?
It's acrylic or plexiglass. I have the same case.
Where U got the raiser from?
You will get it with the case normally.
Hey man, very nice work you did! I'm planning to build a minimalist similar to this, but I will be using Tecware Fusion. Can you help me with this?
Thank you for your kind words! I'd be happy to help you with your minimalist build using the Tecware Fusion case. Minimalist builds can look really sleek and clean. What specific assistance do you need? Are you looking for advice on component selection, cable management, or any other aspect of your build? Feel free to share more details so I can provide you with the most helpful information.
I'm planning on building this kind of pc with the same case. Just wondering how the temps is so far. Do you recommend this case if I will be using it for mostly gaming?
Temp is really bad, been using it for about a year. Get something slightly bigger so you can fit fans in em
@@ericyong5245 good thing i opted out for an NR200P thanks man! 🙌
How many for all?
what is the length and width of your GPU sir?
I used a 2 slot dual fan gpu for this build sir.
also tried to fit a 2 slot strix gtx 1070, and it was super tight but will fit.
pro version of the case supports larger gpu
Is the handle removable and can you mount two 120mm fans at the top panel?
handle is removable, you just remove two screws; it's not possible to mount any fans on top
Are you using a regular psu??
it's SFX PSU only
Why u install a riser cable when u dont use a gpu?
did you use the stock fan from ID Cooling IS-60 Evo? since it's 64mm and the case spec said it only support 60mm, does the fan touches the acrylic panel? Thank you.
yeah i think the same too , because it look so big. but so awesome when i compare it with IS-55 Low Profile. IM thinking to get IS-60 Evo .
@@Storm-gy7mu actually end up with thermalright axp 48 cooper, and amazingly it cools my 5700x well
@@JRFKSERRANO alright then, IM gonna search it first, nice to know about The Cooler u got
Does is 55 fit in this case?
does this case support SFX-L psu?
MAY BE NO
is there still a clearance for an additional HDD on the case? Im planning to get one.
You can fit one underneath the PSU if you use a modular one
You can also place it at the back of the PSU if you have a single fan GPU
does intel stock cooler fit in this case ?
yes
what Cpu cooler is that?
ID Cooling IS-60 Evo
@@rgeregil Woah that's an IS-60? How much mm is there left? According to caseend, CPU cooler max height for this case is 60mm, isn't the IS-60 like, 64mm?
@@jeromevaldres NONE 😅 rubber dampener touches the cover, bulges a mm or two, you wont notice it until you look very closely; still I think it varies on how well the case was assembled by the factory.
@@rgeregil id cooling is 50x v2 have 57mm
How's the CPU temps?
maxed @ 75C
snipboard.io/uE4zGx.jpg
Is it possibe to use atx psu?
it's not possible
hows the temps?
Very hot
how long is the riser?
not sure, it comes with the case
@@rgeregil I know, I just want to order the riser and this cay separately, so I don’t know what length to take
185mm
snipboard.io/RrJWXx.jpg
@@rgeregil thanks
Can you install fan in this case?
I guess one at the bottom of the psu if you have a modular one, there are no mounting holes though.
@@rgeregil yeah please try with 40mm Fan Cooler, it so small, i think just need more modification
What is name and model of the case for this build
Sorry found on aliexpress doesn't have acrylic sides option anymore
I got the same desk mat 😂
Nice build except PSU
Why? That is a decent psu
@@patlotpotlot6154 because of non modular cables
*Gpu left the chat
song was annyoing
HI, where did you put the switch for the power?
i see you’re using the same CPU cooler that I am. Is yours having an issue where the fan blades gently scrape along the side panel as well? I have the metal side panels and depending on how fast the fan spins, it’ll sometimes scratch against the side panel
what's the cooler name? specific
@@Storm-gy7mu is 60 evo
@@aliramadhan0415 thx man
Does your cooler hit your ram or io shield?
@@giopagtalunan8762 no