How To install reverse camera - OEM audio upgrade project

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024

Комментарии • 16

  • @carstenkock7976
    @carstenkock7976 Год назад +3

    Thanks a lot for the first demonstration that really helps me to understand how to get Power to the camera. Always thought that the tiny red wire at the RCA cable is just for a trigger signal that I won't need because the CAN-Bus of my Android Radio (like yours) already recognize that that the reverse gear is shifted! I was thinking about to get the Power from the right reverse light of my Astra J (Limo) but now it will make it much more easier because I just need the Ground coming from the Number Plate light because my Camera will get installed there! Thanks a lot for this!
    Is your 'Secret' some kind of filter / relais to get a clear signal?

    • @silfiriel
      @silfiriel 6 месяцев назад

      This is the only video that shows this

    • @kaukolaDIY
      @kaukolaDIY  6 месяцев назад +1

      I used only these cables, which were included in the set.

    • @jonathan9607
      @jonathan9607 5 месяцев назад

      Hey could u tell me what number that pink wire is plz ​@kaukolaDIY

    • @kaukolaDIY
      @kaukolaDIY  5 месяцев назад

      @jonathan9607 i hope i understood you right, pink wire (Reverse Cam) is number 3 in this main connector, which goes to the radio.

    • @jonathan9607
      @jonathan9607 5 месяцев назад

      Yes you did. I was having issues with the wire colours i didn't have a pink wire i had bunch of green ones together 😂😂😂 took me a bit to figure out which one i had to splice​@kaukolaDIY

  • @jukkaaman9978
    @jukkaaman9978 5 месяцев назад

    How about astra k 2016 rear camera? Any ideas how to install that? Do it need to pair with computer?

  • @kuteshgandhi6036
    @kuteshgandhi6036 5 месяцев назад

    Very useful video, can I pls ask where do you ground the black camera cable behind the stereo end? Is it required, I have the camera working without connecting ground ? Thanks

    • @kaukolaDIY
      @kaukolaDIY  5 месяцев назад

      It needs only one ground, which is connected in the rear, near to the camera (black and red cables). I don't know how your camera can work without this ground cable connected. Does it maybe get a ground from the RCA?

    • @kuteshgandhi6036
      @kuteshgandhi6036 5 месяцев назад

      @@kaukolaDIY thanks, I think in that case the ground must be connected at the camera end, I have swapped the stereo and had a loose ground left, but this new style stereo also had a combined ground with yellow camera cable behind the stereo.

  • @fabiochirizzi
    @fabiochirizzi 3 месяца назад

    There is a 12V from reverse light directly from this big Connector?

    • @kaukolaDIY
      @kaukolaDIY  3 месяца назад +1

      Reverse signal to the radio unit comes straight from the CAN box, it's a pink wire. I didn't measure, if it's 12V or something else.

    • @fabiochirizzi
      @fabiochirizzi 3 месяца назад

      @@kaukolaDIY I'm referring to the 12v that powers the rear camera

    • @kaukolaDIY
      @kaukolaDIY  3 месяца назад +1

      Yes, i'm pretty sure, that it's 12V.

  • @mark_Roberts81
    @mark_Roberts81 9 месяцев назад +1

    Nothing wrong with the camera if u fit it to the rear bumper instead of behind a window 🤣

    • @kaukolaDIY
      @kaukolaDIY  9 месяцев назад +1

      Yes, outside installation would be a better choice. Behind the window, it works ok in a good light. In Low light, not that good, mainly because i had to block those "infrared" lights, because of the reflection 😁.