Dear Dom! I am a young film composer from the alpine country of Austria. I have received so many useful and time-saving tips from you about Cubase that I would like to thank you not only with a subscription and likes, but also directly with you personally: Thank you very much for all your excellent explanations on the countless topics! You save us artists so much time in dealing with Cubase and the plugins, which we can use for our actual work => 1000000 x thanks! Best regards, Mario Dengler
@@DomSigalas I have a sincere question for you: Is it possible to automate the "MIDI Mute" button that is responsible for notes being read on the arranger page with Cubase? With all the MIDI capabilities that Cubase has, I sure hope so, because I'm in the market for a new DAW. I have used Cubase before, but several things have been upgraded since I last used it. I've been using Studio One, but lately I seem to have outgrown it. I'm asking about "MIDI Mute" button automation because I'm a multi-instrumentalist, but my favorite instrument is organ. At home I use a keyboard z-stand and easily split and layer different instruments across my three keyboards. For my keyboard stack, I keep my 64 note keyboard on top, my 88 note keyboard below that, and my 17 note organ style foot pedal keyboard on the floor. Being an organist and also having dexterity on several instruments, I can play entire MIDI arrangements, anything I can think of, on-the-fly using my "virtual organ" setup. After recording the initial instrumentation I've played using my "Virtual Organ" setup, I then go back and flesh out the music by adding live lead/rhythm/guitar(s), bass guitar, drums, saxophone, or whatever else fits the arrangement. I'll usually start with a click track, get a groove going, and work out a few changes. Once I'm in the groove, I'm ready to record. The problem I'm having is that I tend to hear everything at once. So, the hardest thing for me is deciding what order to arrange the changes in. This is the part in Studio One that takes me "out of my zone" and instantly dries up any creative juices that I may have had flowing. In Studio One arranging means using "the (dreaded slow-motion) mouse" and moving things around slowly and meticulously, sometimes note by note to ensure the transitions are smooth. Using "the (dreaded slow-motion) mouse", I tend to have already forgotten what order I want to play the different instruments and changes in. If it was possible to automate the "MIDI Mute" button, I could arrange on the fly, just like I recorded the instrumentation, with no down-time! So, I need to be sure the next DAW I decide to invest my money in includes the ability to automate the "MIDI Mute" Button for quick and easy MIDI sequence editing/arrangement on the fly. You might ask, "Why do I need the ability to automate the "MIDI Mute" button? Why isn't being able to automate the "Audio Mute" button on most DAW mixers good enough. Well, the "MIDI Mute" button actually controls when MIDI notation is read. So, being able to automate it amounts to controlling the rhythmic phrasing of the instrument being played; while "Audio Mute" amounts to a sound engineer cutting your microphone on and off as musically as they can. It's not a big deal until you consider the fact that most VST instrument release times can be extended. Most present day VST instruments also come with their own built in reverb and delay effects, especially software emulations of boutique hardware, which tends to impart a specific sonic character that is desirable over factory effects. Those things should not be cut off by a sound engineer, unless the style of music necessitates glitch or stutter effects. I have decided to share a video as an example of just how much time is saved by having the ability to automate the MIDI Mute button, instead of traditional copy/paste. The video starts by showing the ease of use differences inherent of "MIDI Mute" VS "Audio Mute", with time stamps in the "Show More" section below the video, but real time 1-take actual use of the MIDI Mute Workflow starts at 00:01:55. MIDI Mute V.S. Audio Mute Time Stamps: 00:00:00 MIDI Mute of Kick [Example 1A - Drums] 00:00:15 Audio Mute of Kick [Example 1B - Drums] 00:00:40 MIDI Mute of Strings [Example 2A - Strings] 00:01:00 Audio Mute of Strings [Example 2B - Strings] 00:01:27 MIDI Mute of Bass [Example 3A - Bass] 00:01:44 Audio Mute of Bass [Example 3B - Bass] 00:01:55 MIDI Mute Workflow [Example 4 MIDI Mute Workflow In Action] So, does Steinberg Cubase offer MIDI Mute automation? If so, please let me know by posting a video of this workflow in action. You'll have at least one new customer if it does. Thank you for your time! ruclips.net/video/OOrUk-X5zwU/видео.html
Everytime I watch your videos, I already know I will learn some neat things about working with Cubase. Thanks so much for your great help, best Cubase Channel in my opinion :)
This is very useful. I made a few different CC views and assigned them to my Stream Deck for easy switching. But what would make Cubase more powerful and that a LOT of DAWs can do is the ability to edit the CC data of multiple tracks at once without having to resort to tricks like ghost copying events with option+shift or by using MIDI sends. Just draw in CC1 for say, all the harmony in the strings, once and not having to copy it from violins to violas to cellos, etc. It makes editing so much time consuming.
Good job Dom. I found out about this feature a couple of days ago and as i work with mostly classical instruments and scores, I assigned the Key commands to the Velocity and the Atriculations/Dynamics Lanes. My Key commands are Alt+Num 4 (Velocity), Alt+Num 5 (Art./Dyn.), Alt+Num 6 (Both).
Thanks, Dom for the tip! Extremely useful. Why don't you make a complete course on Cubase, advanced, of course, you have so much knowledge about Cubase, it will be a pity not to share it, so we can learn as well :)
And of course ‘next level’ in Cubase is having all this cc information as automation lanes in the project window where you can edit them with even more detail, especially using quick controls!
Not a Cubendo user, but can you elaborate a little more on what you mean by "even more detail"? More features, or size/scale of the UI? Or both? Just trying to see how it handles MIDI differently to other DAWs.
@@HammyHavoc sure, yes not really more features, but I find it much easier to manage CC data in the automation lanes in the project window. Drawing curves and using the drawing tools is easier with resizing, you have the visibility functions like ‘show all automation’ (you can set up template views for this’, I just prefer it rather than squeezed into the midi editing windows
Very good point, nice use of the Streamdeck as well. What I'd love to see is a way of controlling any plugin parameter with any other plugin parameter. I'm on the look out for a cross-DAW way of doing it.
I use both cubase and studio one .. Cubase use to have the best midi editor but after trying studio one 5 for almost a year.. I dont think cubase is the best at editing midi.i will point out just two reason what studio one does better in editing midi that alone is a game changer for me ..1.. In studio one you can see all the useful midi parameter in tab (horizontal view) very useful for midi workflow ..2.Sound Variation in studio one is something every daw should have.. Example ..Select multiple note right click and select sustain,pitch bend,slide etc and it does that.. Cubase really need this feature if it want to be at the top ..
After learning so much from your very perfect made videos, I just want to thank you very much. I like to see how you explain and work with knowledge and fun. It inspires me! Thx a lot!
Thanks for this, I didn't know about the presets. Nice. I also like that Cubase will let you take the controller data out of the MIDI clips themselves and make them tracks in the arranger window. I really like to work that way when composing with sample libraries because then you can copy and paste note data but go in and record controller data in a separate pass, but the control data won't repeat over and over again, like it would if you copied and pasted with just the MIDI clips.
Not a Cubendo user, but from what I've observed, can you not unlink your copy-pasted clips/events to no longer be a "shared event", thus not duplicating the controller data? Currently kicking the tyres from afar, so I may be wrong.
@@HammyHavoc when you copy a clip they are not linked together unless you group them. So yes you can do that. But I vastly prefer to have controller automation appear as a dedicated lane in the main arrangement window. Just my preference but you can work either way.
I haven't used a DAW that doesn't have all this. I originally used Cubase from Commodore (very first) to Atari ST to Falcon then Mac/PC but then Reason came along and i thing its midi implication and speed plus players are better today
There is a feature I would like so much, it's SQL queries on midi notes, eg., filter, select, grouping etc so I can see when I have notes with velocity above 126 for instance. Chords and tonaity coloring would be also very interesting; for instance I could see regions in Cm or Cm and EM in blue, and F#m in red or something like that, because it would really helping to see musical regions.
You know about the Logical Editor, the original MIDI one. That's as close you'd get in Cubase for SQL. You get criteria for selecting and transforming notes and controllers. You can also extract the notes to a new tracks/parts that you can colorize and then you can display the notes in any Key Editor with the color of the part. Select all the colored parts and open them in an editor and you're in rainbow land. There are also Key Commands for jumping to next and previous parts and if you locked the editor to only edit the selected part you can move back and fotth in one part at a time and move the notes around to your liking without e.g. jumping from the lead notes to the chord notes, since only the lead notes are editable. That's Cubase!
@@HowlingUlf List edit (grid edit - Atari) + Logical Edit is what makes Cubase King of midi. Its really usefull as you in list edit can also see key off velocity if you have synths that responds to this. So easy to fast put in eg a drum part, and use a logical preset to let it live. And if you are a real midi pro you can put sysex commands directly in list edit, which is really nice if you have older synths that often had hidden edit options that were only available as sysex commands, like the Roland GS compatible synths that were ony preset sounds ootb, but opened up as an almost full blown synth with adsr with nrpn commands and sysex.
Awesome as always, Dom! Thanks a lot for sharing your experience and knowledge with the community. And please keep showing us the hidden gems in Cubase
I knew the feature (saving midi lanes selection presets and calling them), but I did not know only cubase had it. The other thing I really like is that when I move in time a selection of notes, the modifiers also are moved, which is not obvious because they are not related in the midi format, so cubase is actually doing the job of associating the modifiers to the note. But maybe I do not know the midi format that well and they are actually linked, because when I play many notes on the piano, I can't think of a way to rebuild the associations; but let me know about it Dom.
Hello ! I don't have a stream deck so I don't know if I can do that part of the trick, but all of the rest is available in Reaper too, in some other forms, but it's pretty much the same thing :) And yes, it's so pawerful ! In my case I use that for orchestral music, and the MIDI editor is really good too :) Reaper often takes advantages of different DAWs and combine all together, because of the open source code type of software :) (I hope my english is correct ! 😅) Thanks for your work ! Great composition to you ! 😎(or "have" a great composition ? 🤔)
Great video as always. I've been looking for a way to control the filter of my synth, i guess it must be in there as well? Cant wait to crank up Cubase and go explore.
Hey Dom! Im cubase user i love cubase but honestly i think the best midi piano roll without dough is the Fl studio one, did you ever give it a try? Whats your opinion on it? I also mix fl studio and cubase because both can be connected. Send you big hugs! From Puerto Rico
Hey Dom, big fan here. Thank you so much for the info, is this the Elgato Stream Deck XL? By the way is it true, you're Greek? (Just in case you are καλημέρα!)
That's going to be a godsend, thanks dude. Now I need to figure out how to get Cubase's MIDI editor to respond like Bitwig's, which is great for editing.
greetings Dom! I have a question if it's not a problem... I have an Arturia Keylab 61 essential midi controller. The problem is that I don't know how to set the controls to record the cc control data inside the midi editor...expression, volume, ..etc...I don't know how and where to set it up in Cubase. If you can show it sometime, I would be very grateful!! By all means, thank you in advance and God bless you!!! 😇🙏❤
Yeah knew about it, got the same kinds of presets as well :D but it's super useful. Although didn't know about the "show all used cc automation" as a keyboard shortcut. Gotta add that to my library of shortcuts. Great video as usual
I haven’t used cubase for a long time. So i just bought cubase pro 12 as it seems to be better suited to linear recording than ableton. Do you recommend a course?
Hey Dom, with interest i followed your video about the super midi tool, which i will integrate in my workflow. But there is another question about MIDI Controllers. What`s about exprssion maps? Are you working with those controllers? In case of YES a short video about would be fine, in case NO why not? If you are working with orchestra libraries as VSL or Cinesamples isn`t it a way for changing articulations in a more visible way than keysitches within the key-editor? Greetings from Vienna, Austria
Hi Dom! I love your videos, if you can, Could you make a video about the Midi Mapping Assistance for surface? Thank you in advance! Great video. I didn't knew this and it's really usefull for me since I work with midi every day!
It's cool. I have been doing the same thing in Pro Tools for years, though. It's not super obvious, but you can save the visible Lanes in the MIDI Editor window as a Window Configuration (that only affects the MIDI Editor window) that is triggered by a Memory Location. (folks, "Memory Location" in Pro Tools does a lot more than Markers. you can store Edit Selections, Track Visibility, Window Configs and more) You pretty much do have to save it in (and use) a Template so that you have those Window Configs and Memory Locations available when you work. But if you're doing this kind of work, you probably have a Template that you work from anyway.
Hiya Dom!! Lovely to see you in the flesh at last and chat at Synthfest previous Sat (and Luke of course), nice MODX+ demo's!!! Always helpful Cubase tips from you, even though I've been using it since v3(!)... 😎👍🎹🎶🍻
Hello! I know your really good with Cubase, so I wanted to ask you about a problem I've been having. I got Cubase Artist 12 a few months ago, and in the past week, the midi editor's measure numbers and quantization no longer aligns with the main project view. Is their some setting I accidentally switched on or off that would fix this?
Dom, I posted on forum but did not receive an answer yet. I record midi on an instrument track. Next, I engage write and record my expression cc. When I do that, I end up with 2 controller expression tracks. (in the track view) They appear to be dublicates but one says Replace 1 part range. No idea what this is, or how to get rid of except to delete it. Any information why this happens? Also, is it better to use controllers in the track view so you can copy to other instruments? (strings for instance). Can you also do that in the Midi Editor. Thanks for a great and informative channel.
There is a stream deck plugin for cubase That being said I haven't been able to set it up in cubase pro 12 yet as they redesigned a lot of the menus and I can't find the option that I need
Have you seen the Avid Control App for Cubase. Could this be a free alternative to Stream Deck? I would love to hear your views. Or even a review if you have time.
Great tutorial as usual! My question is for a simple thing you did in the very beginning. Is there a shortcut for opening the MIDI editor full screen? Not seeing one, I created one, but it only opens it. It doesn't close it. If there isn't already a shortcut that I'm overlooking, how do I get mine to both open and close the editor?
I do have to say - cubase is very powerfull.. and youre right - in some parts it tha master - but if it would be done in a better more easy way - you just even doesnt have to do all that stuff..
And of course, Awesome as always, Dom ! One of my other héros is Hans Zimmer. He uses a touch screen for all the most commun fonctions of Cubase in lieu of drop down menus, greatly accelerating his workflow. Any idea of his setup ? Thank you for a great channel !
Hey dom,i love your channel and appreciate all of your content. I have to ask, you work with a lot of video compositions yet i haven’t seen you use nuendo, do you do you video compositions only using cubase? Thank you for all your great and informative videos. They have been “instrumental” to my learning/staying up to date with audio and cubase in general.
Nice, I agree that is a nice set of features that cubase has, I have also been using it for a while, I hope they make an update though, many of us have multiple monitors these days, so it would be great if the midi data lanes could also be opened in it's own window and also allow us to make a midi data lane as big as we like, the height limit can be frustrating, that would be great.
Did you change your voiceover vocal chain, EQ setting, or plugin? I've watched a lot of your content but this video has a different EQ curve than your other videos. A bit brighter. It's actually an improvement. What changed?
Thanks for that amazing tips If you tell me how can I assign that shortcut to my MIDI controller It’ll be helpful. Because I don’t Have Stream Deck Thanks Dom.
Something that is confusing me about Cubase is that I don't know when to use MIDI CCs vs automation. Logic treats them as the same thing, but Cubase doesn't, and it seems like there are situations where they weirdly clash and don't play nicely together. For example, my SSL UF1 won't record MIDI CC data into Cubase, even when I put it into MIDI CC mode, but it will record automation data into Cubase.
I follow your channel. Great content always. But I beg to differ on this video. Dont get me wrong, I am a Cubase user. For me, it's the best all-around DAW for production, and I have been using it for all my productions, start to finish, for the last 5-6 years. But if you say MIDI and Piano Rolls, the winner is FL Studio. Yes, there are many great features in the Cubase MIDI editor. Many of them aren't available in other DAWs for sure. But what matters the most while working with MIDI is speed. FL piano roll is just so intelligent and fast. There is no key pressing, the cursor always knows what to do based on where it is. The piano roll tools are also great. Anyway, I've been working entirely in Cubase for the last few years, but before that I used to do arrangements in FL and then bring everything into Cubase for recording and mixing.
Hey my friend! I really appreciate the time it took for you to write this. I’m may say it a lot on my channel but I own pretty much every DAW out there. FL studio is a really enjoyable DAW to use and has some really nifty features in the midi editor side of things (808 glides etc). But I personally don’t find it faster. This is because I work with multiple music genres every day- not just electronic music where everything has to be on the grid. With FL studio I find that it helps you be very mechanical and pushes you towards this direction - but this is great because it works for these music genres. But when you work with orchestral libraries, things that need to be played with emotion and a bit of looseness, I need something like Cubase. Expression maps, all the things I showed on this video, the logical editor that allows you to do super complex midi functions with one keystroke make it indispensable for me. I Am also not a fan of switching DAWs at all. And I would never mix in FL studio (I’m 100% honest here). But this is just me and my needs as I go from electronic music to orchestral writing, mixing and mastering multiple times throughout a working day. If FL studio makes you work faster then more power to you! Choosing a DAW is such a personal thing - whatever makes you more creative and efficient. If you’ve found that the sweet spot is FL and Cubase I applaud you for that- you didn’t choose blindly :)
@@DomSigalas I mostly agree with you mate. Like I said, and shown in this video, there are many things in Cubase, which is not present in other piano rolls. I have used every DAW and completely loved Cubase. I mostly work in acoustic genres that requires a lot of recording. And obviously FL Studio is not even close when it comes to recording or mixing or using stock plugs. That's is why now I produce completely in Cubase for last few years. Who likes changing DAWs ☺️ But ya, for piano roll note entry or midi editing, FL is faster for me. Intelligent cursor saves a lot of time, slightly off grid, expression maps, note by note editing, no problem. For everything else, it's always Cubase, 10 out of 10 times. It's just my humble opinion. Cheers!
Dear Dom!
I am a young film composer from the alpine country of Austria. I have received so many useful and time-saving tips from you about Cubase that I would like to thank you not only with a subscription and likes, but also directly with you personally:
Thank you very much for all your excellent explanations on the countless topics! You save us artists so much time in dealing with Cubase and the plugins, which we can use for our actual work => 1000000 x thanks! Best regards, Mario Dengler
Thank you so much for the kind words Mario! Glad the videos are useful!!!
@@DomSigalas I have a sincere question for you: Is it possible to automate the "MIDI Mute" button that is responsible for notes being read on the arranger page with Cubase? With all the MIDI capabilities that Cubase has, I sure hope so, because I'm in the market for a new DAW. I have used Cubase before, but several things have been upgraded since I last used it. I've been using Studio One, but lately I seem to have outgrown it.
I'm asking about "MIDI Mute" button automation because I'm a multi-instrumentalist, but my favorite instrument is organ. At home I use a keyboard z-stand and easily split and layer different instruments across my three keyboards. For my keyboard stack, I keep my 64 note keyboard on top, my 88 note keyboard below that, and my 17 note organ style foot pedal keyboard on the floor. Being an organist and also having dexterity on several instruments, I can play entire MIDI arrangements, anything I can think of, on-the-fly using my "virtual organ" setup. After recording the initial instrumentation I've played using my "Virtual Organ" setup, I then go back and flesh out the music by adding live lead/rhythm/guitar(s), bass guitar, drums, saxophone, or whatever else fits the arrangement. I'll usually start with a click track, get a groove going, and work out a few changes. Once I'm in the groove, I'm ready to record.
The problem I'm having is that I tend to hear everything at once. So, the hardest thing for me is deciding what order to arrange the changes in. This is the part in Studio One that takes me "out of my zone" and instantly dries up any creative juices that I may have had flowing. In Studio One arranging means using "the (dreaded slow-motion) mouse" and moving things around slowly and meticulously, sometimes note by note to ensure the transitions are smooth. Using "the (dreaded slow-motion) mouse", I tend to have already forgotten what order I want to play the different instruments and changes in.
If it was possible to automate the "MIDI Mute" button, I could arrange on the fly, just like I recorded the instrumentation, with no down-time! So, I need to be sure the next DAW I decide to invest my money in includes the ability to automate the "MIDI Mute" Button for quick and easy MIDI sequence editing/arrangement on the fly.
You might ask, "Why do I need the ability to automate the "MIDI Mute" button? Why isn't being able to automate the "Audio Mute" button on most DAW mixers good enough. Well, the "MIDI Mute" button actually controls when MIDI notation is read. So, being able to automate it amounts to controlling the rhythmic phrasing of the instrument being played; while "Audio Mute" amounts to a sound engineer cutting your microphone on and off as musically as they can. It's not a big deal until you consider the fact that most VST instrument release times can be extended. Most present day VST instruments also come with their own built in reverb and delay effects, especially software emulations of boutique hardware, which tends to impart a specific sonic character that is desirable over factory effects. Those things should not be cut off by a sound engineer, unless the style of music necessitates glitch or stutter effects.
I have decided to share a video as an example of just how much time is saved by having the ability to automate the MIDI Mute button, instead of traditional copy/paste. The video starts by showing the ease of use differences inherent of "MIDI Mute" VS "Audio Mute", with time stamps in the "Show More" section below the video, but real time 1-take actual use of the MIDI Mute Workflow starts at 00:01:55.
MIDI Mute V.S. Audio Mute Time Stamps:
00:00:00 MIDI Mute of Kick [Example 1A - Drums]
00:00:15 Audio Mute of Kick [Example 1B - Drums]
00:00:40 MIDI Mute of Strings [Example 2A - Strings]
00:01:00 Audio Mute of Strings [Example 2B - Strings]
00:01:27 MIDI Mute of Bass [Example 3A - Bass]
00:01:44 Audio Mute of Bass [Example 3B - Bass]
00:01:55 MIDI Mute Workflow [Example 4 MIDI Mute Workflow In Action]
So, does Steinberg Cubase offer MIDI Mute automation? If so, please let me know by posting a video of this workflow in action. You'll have at least one new customer if it does. Thank you for your time!
ruclips.net/video/OOrUk-X5zwU/видео.html
Everytime I watch your videos, I already know I will learn some neat things about working with Cubase. Thanks so much for your great help, best Cubase Channel in my opinion :)
This is very useful. I made a few different CC views and assigned them to my Stream Deck for easy switching. But what would make Cubase more powerful and that a LOT of DAWs can do is the ability to edit the CC data of multiple tracks at once without having to resort to tricks like ghost copying events with option+shift or by using MIDI sends. Just draw in CC1 for say, all the harmony in the strings, once and not having to copy it from violins to violas to cellos, etc. It makes editing so much time consuming.
Good job Dom. I found out about this feature a couple of days ago and as i work with mostly classical instruments and scores, I assigned the Key commands to the Velocity and the Atriculations/Dynamics Lanes. My Key commands are Alt+Num 4 (Velocity), Alt+Num 5 (Art./Dyn.), Alt+Num 6 (Both).
Every time I think I know enough in Cubase Dom makes a video and teaches me more. Great work as usual!
Awesome feature, thanks for sharing, Dom! I love working in Cubase! Great tips! 👍👍👍
I've had the exact same StreamDeck-based method for the CC lanes for a year now, and it's been an amazing time-saver! 💪✨
- Eero
How do we pan left and right e.g on 808
Awesome as always, Dom. I've been using Cubase for years and had no idea about this. Thanks a million!
would like to see more Midi specials!
Cubase has so many great functions in this area... ❤
Preset lanes, and stream deck. How cool is that? Thanks Dom to give me a detail that i have missed (the preset lanes...). Very useful!
This is great! Thanks Dom!
Thanks, Dom for the tip! Extremely useful. Why don't you make a complete course on Cubase, advanced, of course, you have so much knowledge about Cubase, it will be a pity not to share it, so we can learn as well :)
As someone looking to jump ship to Cubendo, this is easily worth a few hundred bucks to me.
Ohhhhh snap this is super helpful, I don’t know how this has eluded me, thanks for this one!
the Power always be with you Dom🤩
Didn't know all THIS was available! Thanks!!
And of course ‘next level’ in Cubase is having all this cc information as automation lanes in the project window where you can edit them with even more detail, especially using quick controls!
Not a Cubendo user, but can you elaborate a little more on what you mean by "even more detail"? More features, or size/scale of the UI? Or both? Just trying to see how it handles MIDI differently to other DAWs.
@@HammyHavoc sure, yes not really more features, but I find it much easier to manage CC data in the automation lanes in the project window. Drawing curves and using the drawing tools is easier with resizing, you have the visibility functions like ‘show all automation’ (you can set up template views for this’, I just prefer it rather than squeezed into the midi editing windows
Very helpful! Love your energy too
After one year using Cubase, I couldn't even imagine about this beauty!
I don't use Cubase but, it is very useful information - Cheers!
Very good point, nice use of the Streamdeck as well. What I'd love to see is a way of controlling any plugin parameter with any other plugin parameter. I'm on the look out for a cross-DAW way of doing it.
That is supercool! I've always been wasting so much time moving between the different CCs instead of thinking to show them all together. Thanks@
Thanks a lot for this another tip Dom! Continue like this ;) . We'll continue to follow you. Good job again!
Great VIdeo! As always Dom showing the tricks and secrets from this amazing DAW. Best regards from Brazil! God bless you!
I use both cubase and studio one .. Cubase use to have the best midi editor but after trying studio one 5 for almost a year.. I dont think cubase is the best at editing midi.i will point out just two reason what studio one does better in editing midi that alone is a game changer for me ..1.. In studio one you can see all the useful midi parameter in tab (horizontal view) very useful for midi workflow ..2.Sound Variation in studio one is something every daw should have.. Example ..Select multiple note right click and select sustain,pitch bend,slide etc and it does that.. Cubase really need this feature if it want to be at the top ..
After learning so much from your very perfect made videos, I just want to thank you very much. I like to see how you explain and work with knowledge and fun. It inspires me! Thx a lot!
Thanks for this, I didn't know about the presets. Nice. I also like that Cubase will let you take the controller data out of the MIDI clips themselves and make them tracks in the arranger window. I really like to work that way when composing with sample libraries because then you can copy and paste note data but go in and record controller data in a separate pass, but the control data won't repeat over and over again, like it would if you copied and pasted with just the MIDI clips.
Not a Cubendo user, but from what I've observed, can you not unlink your copy-pasted clips/events to no longer be a "shared event", thus not duplicating the controller data? Currently kicking the tyres from afar, so I may be wrong.
@@HammyHavoc when you copy a clip they are not linked together unless you group them. So yes you can do that. But I vastly prefer to have controller automation appear as a dedicated lane in the main arrangement window. Just my preference but you can work either way.
I haven't used a DAW that doesn't have all this. I originally used Cubase from Commodore (very first) to Atari ST to Falcon then Mac/PC but then Reason came along and i thing its midi implication and speed plus players are better today
did not know have to look in to it now thanks for shearing Dom
There is a feature I would like so much, it's SQL queries on midi notes, eg., filter, select, grouping etc so I can see when I have notes with velocity above 126 for instance. Chords and tonaity coloring would be also very interesting; for instance I could see regions in Cm or Cm and EM in blue, and F#m in red or something like that, because it would really helping to see musical regions.
You know about the Logical Editor, the original MIDI one. That's as close you'd get in Cubase for SQL. You get criteria for selecting and transforming notes and controllers. You can also extract the notes to a new tracks/parts that you can colorize and then you can display the notes in any Key Editor with the color of the part. Select all the colored parts and open them in an editor and you're in rainbow land. There are also Key Commands for jumping to next and previous parts and if you locked the editor to only edit the selected part you can move back and fotth in one part at a time and move the notes around to your liking without e.g. jumping from the lead notes to the chord notes, since only the lead notes are editable. That's Cubase!
@@HowlingUlf List edit (grid edit - Atari) + Logical Edit is what makes Cubase King of midi. Its really usefull as you in list edit can also see key off velocity if you have synths that responds to this. So easy to fast put in eg a drum part, and use a logical preset to let it live. And if you are a real midi pro you can put sysex commands directly in list edit, which is really nice if you have older synths that often had hidden edit options that were only available as sysex commands, like the Roland GS compatible synths that were ony preset sounds ootb, but opened up as an almost full blown synth with adsr with nrpn commands and sysex.
Awesome as always, Dom! Thanks a lot for sharing your experience and knowledge with the community. And please keep showing us the hidden gems in Cubase
I knew the feature (saving midi lanes selection presets and calling them), but I did not know only cubase had it. The other thing I really like is that when I move in time a selection of notes, the modifiers also are moved, which is not obvious because they are not related in the midi format, so cubase is actually doing the job of associating the modifiers to the note. But maybe I do not know the midi format that well and they are actually linked, because when I play many notes on the piano, I can't think of a way to rebuild the associations; but let me know about it Dom.
Yes Dom..Cubase is the Best DAW for MIDI programming... & HELL YES - Only you reveal these top notch best practices...🤓👍👍🥇
Im here i mean here in the midi how to pan left and right
thanks, it actually let me through so i could download it.
You are the best Dom!!!
yep Dom, studio one does this also,they also updated the macro bars for different music styles,cheers m8
You're a godsend, Dom. Thank you, once again!
Hello ! I don't have a stream deck so I don't know if I can do that part of the trick, but all of the rest is available in Reaper too, in some other forms, but it's pretty much the same thing :) And yes, it's so pawerful ! In my case I use that for orchestral music, and the MIDI editor is really good too :) Reaper often takes advantages of different DAWs and combine all together, because of the open source code type of software :)
(I hope my english is correct ! 😅)
Thanks for your work ! Great composition to you ! 😎(or "have" a great composition ? 🤔)
Using Cubase since the Atari one but found this tip only a few month ago ! Very cool tip.
What is Atari?
@@InnerSyncMusic ruclips.net/video/YQvpgqEjpVY/видео.html
8:13 I mean Hans Zimmer himself says Cubase is his poison
Wow, very useful - many thanks!
Great video as always. I've been looking for a way to control the filter of my synth, i guess it must be in there as well? Cant wait to crank up Cubase and go explore.
Thank you! It's going to save me a lot of time!
dear dom thank you so much .
That’s a statement, nothing beats Cubase 💪🏻💪🏻💪🏻
Wooooow nice trick !
I legit never knew this trick. You've schooled me today Dom.
Still working as of today, ty!
Hey Dom! Im cubase user i love cubase but honestly i think the best midi piano roll without dough is the Fl studio one, did you ever give it a try? Whats your opinion on it? I also mix fl studio and cubase because both can be connected. Send you big hugs! From Puerto Rico
WHOA! I had no idea about the CTRL+ALT+C feature! And to be able to use it with my 'lil Stream Deck Mini! 😲
Thanks Dom, great video! Got a stream deck after this video.
That's a great tip. I have to buy stream deck for pc. Does it change the assigned commands when you switch between workspaces or editors in Cubase?
I remember the first video from you was that neat super saw synth in Cubase :)
Did you ever use Digital Performer ?
Your videos are amazing and helping me as a hobby composer. Thanks a lot for that. 🤗🤗👍👍
Hey Dom, big fan here. Thank you so much for the info, is this the Elgato Stream Deck XL?
By the way is it true, you're Greek? (Just in case you are καλημέρα!)
Thank u for all your videos.i would love to see a video about your personal macros.
That's going to be a godsend, thanks dude. Now I need to figure out how to get Cubase's MIDI editor to respond like Bitwig's, which is great for editing.
I recently saw this in another video of you, in less detail. "12 midi tips in Cubase" or something. Excellent info. Thx Dom.
Cubase is the best!
The new track is epic! Love it!
Thank you my friend!
Thanks a lot Dom, but how will that apply to an Ipad and Cubasis 3.6.1? Feliz Navidad.
Cubase is such a deep world
Dom? you are amazin! Sometime your quick tips EXTREMELY useful! Thank's !
creating those presets, whaauw,.. great trick, thanks!
greetings Dom! I have a question if it's not a problem... I have an Arturia Keylab 61 essential midi controller. The problem is that I don't know how to set the controls to record the cc control data inside the midi editor...expression, volume, ..etc...I don't know how and where to set it up in Cubase. If you can show it sometime, I would be very grateful!! By all means, thank you in advance and God bless you!!! 😇🙏❤
Yeah knew about it, got the same kinds of presets as well :D but it's super useful. Although didn't know about the "show all used cc automation" as a keyboard shortcut. Gotta add that to my library of shortcuts. Great video as usual
I haven’t used cubase for a long time. So i just bought cubase pro 12 as it seems to be better suited to linear recording than ableton. Do you recommend a course?
As always you are the best Dom, very useful Thank you very much 👌👌
hey I had a question bro, do you think the shadows hills compressor would work good as a parallel compressor? for drums?
Another excellent video as always. Couldn't help notice the shirt though. Hal? 2001?
Spot on!
Hi Dom! I was a little confused.. Were you routing the midi, or, simply viewing the midi controller information. Thanks
Awesome
Hey Dom,
with interest i followed your video about the super midi tool, which i will integrate in my workflow. But there is another question about MIDI Controllers. What`s about exprssion maps? Are you working with those controllers? In case of YES a short video about would be fine, in case NO why not? If you are working with orchestra libraries as VSL or Cinesamples isn`t it a way for changing articulations in a more visible way than keysitches within the key-editor?
Greetings from Vienna, Austria
Hi Dom! I love your videos, if you can, Could you make a video about the Midi Mapping Assistance for surface? Thank you in advance! Great video. I didn't knew this and it's really usefull for me since I work with midi every day!
It's cool. I have been doing the same thing in Pro Tools for years, though. It's not super obvious, but you can save the visible Lanes in the MIDI Editor window as a Window Configuration (that only affects the MIDI Editor window) that is triggered by a Memory Location. (folks, "Memory Location" in Pro Tools does a lot more than Markers. you can store Edit Selections, Track Visibility, Window Configs and more) You pretty much do have to save it in (and use) a Template so that you have those Window Configs and Memory Locations available when you work. But if you're doing this kind of work, you probably have a Template that you work from anyway.
Dear Dom, how exactly can record midi from Kontakt with midi patterns from Library's?
Hiya Dom!! Lovely to see you in the flesh at last and chat at Synthfest previous Sat (and Luke of course), nice MODX+ demo's!!! Always helpful Cubase tips from you, even though I've been using it since v3(!)... 😎👍🎹🎶🍻
Hey man! Who were you? I am trying to connect the dots between the person- RUclips username hahaha 😂
@@DomSigalas Yep, the audio eng Dom. I had my infamous black Synthex Tee on, sky blue back pack. Came over to you just after noon time! 😉👍
@@theaudioeng aaaah so good to see you there! ❤️ great show right?
Hello! I know your really good with Cubase, so I wanted to ask you about a problem I've been having. I got Cubase Artist 12 a few months ago, and in the past week, the midi editor's measure numbers and quantization no longer aligns with the main project view. Is their some setting I accidentally switched on or off that would fix this?
Dom, I posted on forum but did not receive an answer yet. I record midi on an instrument track. Next, I engage write and record my expression cc. When I do that, I end up with 2 controller expression tracks. (in the track view) They appear to be dublicates but one says Replace 1 part range. No idea what this is, or how to get rid of except to delete it. Any information why this happens? Also, is it better to use controllers in the track view so you can copy to other instruments? (strings for instance). Can you also do that in the Midi Editor. Thanks for a great and informative channel.
There is a stream deck plugin for cubase
That being said I haven't been able to set it up in cubase pro 12 yet as they redesigned a lot of the menus and I can't find the option that I need
Can we control midi with a group channel? Like we do audio
Have you seen the Avid Control App for Cubase. Could this be a free alternative to Stream Deck? I would love to hear your views. Or even a review if you have time.
Great tutorial as usual!
My question is for a simple thing you did in the very beginning. Is there a shortcut for opening the MIDI editor full screen? Not seeing one, I created one, but it only opens it. It doesn't close it. If there isn't already a shortcut that I'm overlooking, how do I get mine to both open and close the editor?
Yes, I created one - I have Control-Enter for mine :)
it's called Open/Close Editor under Editors folder in key commands
@@Ravez77 not sure what I did before, but it wasn't this. Thanks!
Just wondering have you did one on how to setup vocoder from scratch . Modx . And once setup how do save it .
I do have to say - cubase is very powerfull.. and youre right - in some parts it tha master - but if it would be done in a better more easy way - you just even doesnt have to do all that stuff..
And of course, Awesome as always, Dom ! One of my other héros is Hans Zimmer. He uses a touch screen for all the most commun fonctions of Cubase in lieu of drop down menus, greatly accelerating his workflow. Any idea of his setup ? Thank you for a great channel !
TouchOSC
@@braunhausmedia Hans says it is a custom system by Mark Wherry, who also works at RCP.
Hey dom,i love your channel and appreciate all of your content. I have to ask, you work with a lot of video compositions yet i haven’t seen you use nuendo, do you do you video compositions only using cubase? Thank you for all your great and informative videos. They have been “instrumental” to my learning/staying up to date with audio and cubase in general.
Great question!
Nice, I agree that is a nice set of features that cubase has, I have also been using it for a while, I hope they make an update though, many of us have multiple monitors these days, so it would be great if the midi data lanes could also be opened in it's own window and also allow us to make a midi data lane as big as we like, the height limit can be frustrating, that would be great.
Have you mentioned this to Steinberg on their forum? They seem very welcoming to feedback and feature requests.
Did you change your voiceover vocal chain, EQ setting, or plugin? I've watched a lot of your content but this video has a different EQ curve than your other videos. A bit brighter. It's actually an improvement. What changed?
Hmmm I am still using the Neve Portico. Could be that I place the Sennheiser 416 a bit closer :)
I would like to use the touchbar instead of the stream desk.
You can do this in Reaper
when I see Dom Cubase tips I click
how do you get different colors on notes mine are all the same ?!
Thanks for that amazing tips
If you tell me how can I assign that shortcut to my MIDI controller It’ll be helpful.
Because I don’t Have Stream Deck
Thanks Dom.
Check my video about the midi remote in Cubase 12 :)
@@DomSigalas Thanks Dom :)
Can this be done in Cakewalk by Bandlab or @Reason Studios?
Something that is confusing me about Cubase is that I don't know when to use MIDI CCs vs automation. Logic treats them as the same thing, but Cubase doesn't, and it seems like there are situations where they weirdly clash and don't play nicely together. For example, my SSL UF1 won't record MIDI CC data into Cubase, even when I put it into MIDI CC mode, but it will record automation data into Cubase.
If at this point some one can't see how cool Cubase Pro is I really don't know what to say....👊🏽
I follow your channel. Great content always. But I beg to differ on this video. Dont get me wrong, I am a Cubase user. For me, it's the best all-around DAW for production, and I have been using it for all my productions, start to finish, for the last 5-6 years. But if you say MIDI and Piano Rolls, the winner is FL Studio. Yes, there are many great features in the Cubase MIDI editor. Many of them aren't available in other DAWs for sure. But what matters the most while working with MIDI is speed. FL piano roll is just so intelligent and fast. There is no key pressing, the cursor always knows what to do based on where it is. The piano roll tools are also great.
Anyway, I've been working entirely in Cubase for the last few years, but before that I used to do arrangements in FL and then bring everything into Cubase for recording and mixing.
Hey my friend! I really appreciate the time it took for you to write this. I’m may say it a lot on my channel but I own pretty much every DAW out there. FL studio is a really enjoyable DAW to use and has some really nifty features in the midi editor side of things (808 glides etc).
But I personally don’t find it faster. This is because I work with multiple music genres every day- not just electronic music where everything has to be on the grid. With FL studio I find that it helps you be very mechanical and pushes you towards this direction - but this is great because it works for these music genres. But when you work with orchestral libraries, things that need to be played with emotion and a bit of looseness, I need something like Cubase. Expression maps, all the things I showed on this video, the logical editor that allows you to do super complex midi functions with one keystroke make it indispensable for me. I Am also not a fan of switching DAWs at all. And I would never mix in FL studio (I’m 100% honest here). But this is just me and my needs as I go from electronic music to orchestral writing, mixing and mastering multiple times throughout a working day. If FL studio makes you work faster then more power to you! Choosing a DAW is such a personal thing - whatever makes you more creative and efficient. If you’ve found that the sweet spot is FL and Cubase I applaud you for that- you didn’t choose blindly :)
@@DomSigalas I mostly agree with you mate. Like I said, and shown in this video, there are many things in Cubase, which is not present in other piano rolls. I have used every DAW and completely loved Cubase. I mostly work in acoustic genres that requires a lot of recording. And obviously FL Studio is not even close when it comes to recording or mixing or using stock plugs. That's is why now I produce completely in Cubase for last few years. Who likes changing DAWs ☺️
But ya, for piano roll note entry or midi editing, FL is faster for me. Intelligent cursor saves a lot of time, slightly off grid, expression maps, note by note editing, no problem.
For everything else, it's always Cubase, 10 out of 10 times. It's just my humble opinion.
Cheers!