I just got a p-rep board today it's great. The only problem is the tool it comes with. It was very hard to screw in the screws. I think tech deck tools are slightly better but still didn't screw in the screws. I had to use a tiny screwdriver I already had that had a bigger handle. So if you get a p-rep board make sure you have a tiny screwdriver with a bigger handle.
when the boards are glued, wouldnt they be done in a vacuum bag? rather than placing weight on them. a vacuum bag would apply even pressure all the way around.
Ok I bought 3 boards 2 completes and bought all of the separate parts for one and these boards are just very good, so if you are just starting then get a teak tuning
Do you recommend the $20 board to a beginner i just learned how to olli and I’m not good at it, i can also tray flip, pop shuv it and and grind but I’m not consistent.
If you don't want to get the most expensive fingerboard (literally just the woob deck in kelseys setup if worth $50-$60) you can get the 'second best' or mid range for everything. e.g instead of getting brts which are the most expensive, get dynamics (my fav truck). This will save you around $15-$20. Instead of getting a woob/flint or the best decks get a good quality but cheaper deck. These are usually from smaller companies (which are super underrated) You can get a deck like a DK blank, hana deck, enso deck for $20-$30 but still get a good quality deck. For wheels same goes DK wheels, maple wheels will get you a good quality set of urethane, bearing locked wheels for cheaper than the most premium wheels. So there should have been another range of setup in this video, a $80-$100 setup is sometimes all you need to get the same quality as a $150 setup. Support small companies and save more.
@@emperomassinencambio...9941 top notch wheels: Joycult, illpills, flatface, abstract, labs Top notch tuning: Dislocation, bracelet bushings, backer bushings, levelup. Does tuning include tape? if yes: Sponser me tape, fbs, blackvelvet These are basically the best you can get without any issues (with the product, joycult and lab shipping and customer service is kinda bad)
You can bc they’re great starter decks but I would honestly recommend getting some nice grip tape (like rip tape or fbs grip tape) and then some bearing wheels (teak wheels would honestly be perfectly fine for just starting out) and putting them on your tech deck
Honestly, if ur just getting into fingerboarding then all you need is a 32mm tech deck, some cheap bearing wheels and some tuning. Just upgrade what you want as you get better.
my favorite decks are poli decks, those are abt $40 and for the other parts id say get some of those 32mm $10 china trucks and china wheels, the total should come out to be abt $57 plus shipping
Idk why everyone says that bc I got some Berlin wood & blackriver completes and they were like $120 each and my actual skateboard cost like $150 in total so no they don’t cost more than an actual skateboard setup
Tech decks 2020 performance series, in my opinion closes the gap in the market. with the 12 usd dollar price tag its more worth it and better if not just as good quality than most “budget” fingerboard completes. In conclusion, with this new 2020 series of wooden teck decks its not worth it to buy anything else but to go all out on blackrivers complete
For anyone new, woobs won't cost $40... you are usually paying upwards of $200. So just understand that if you want a woob price is a huge barrier compared to other decks
25 years ago a friend sent me one of these (shoutout to SareBear), and now, I realize this is entire industry and all, I had fun doing flips with fingers but c mon kids get out get real boards.
I saw a old video of ur and thought this has to be a phase theres no way shes still making tech deck vids after 2 years (thats how old the video i saw was..) lol I just got one today a cheap pro tech deck but its fun. I remember when tech decks had real grip tape and not like nail file tape
I’ve ordered from teak twice, one pack of grip and bubble bushings, the grip was absolutely terrible and the bubble bushings wouldn’t fit on my kingpin because they are too tall which made it impossible to put on my locknut. Eventually I got them on but tbh I don’t know if teak is worth the time in general
@@daniellovejr9438 Teak decks are ok. If you have a teak deck and a Berlin wood deck in each hand you can definitely feel the difference. Berlin Wood feels soo much nicer and better quality. But if you’re just starting out or if it’s all you can afford they’re great starter decks 👌🏻
David Jones even commented on fingerboards being more expensive than skateboards, David Jones hand makes so many boards in all of his videos, it’s rly not that hard 🤷♂️ yes making a fingerboard is harder to make, but no, they should not be 50$ sorry
Kelsy I really love your videos and I want to work on my kickflips on a fingerboard and I would be happy if you respond to my video of me doing my kickflips on insta
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
I just got a p-rep board today it's great. The only problem is the tool it comes with. It was very hard to screw in the screws. I think tech deck tools are slightly better but still didn't screw in the screws. I had to use a tiny screwdriver I already had that had a bigger handle. So if you get a p-rep board make sure you have a tiny screwdriver with a bigger handle.
No mater if your having a good day or a bad day whenever Kelsey uploads it just gets better
True
simp
that makes me so happy to hear!
Kelsey Fingerboards hi kelsey
Str8 facts
"Hey guys, what's up. Kelsey here." I love hearing those words at the beginning of every video it's like a trademark
(:
😊
E
True that
When you have a kevyoso RUclips icon hahaha jk
Yes
when the boards are glued, wouldnt they be done in a vacuum bag? rather than placing weight on them. a vacuum bag would apply even pressure all the way around.
Ok I bought 3 boards 2 completes and bought all of the separate parts for one and these boards are just very good, so if you are just starting then get a teak tuning
What is the best medium sized board
Kelsey what is your fav fingerboard of those 3?
Also, I just got a broken knuckle complete and I love it!
Broken buckle came out with 34mm by 97mm with shaped trucks for $19 make a review plz
Do you recommend the $20 board to a beginner i just learned how to olli and I’m not good at it, i can also tray flip, pop shuv it and and grind but I’m not consistent.
Hey kelsey i ordered a teak custom board but the wheels keep falling off after i tighten them 5 minutes later what do i do
Can you do a review on a skull complete board
You should do a review of dynamic trucks.
How long does it take for stuff from blackriver to get to florida?
If you don't want to get the most expensive fingerboard (literally just the woob deck in kelseys setup if worth $50-$60) you can get the 'second best' or mid range for everything. e.g instead of getting brts which are the most expensive, get dynamics (my fav truck). This will save you around $15-$20. Instead of getting a woob/flint or the best decks get a good quality but cheaper deck. These are usually from smaller companies (which are super underrated) You can get a deck like a DK blank, hana deck, enso deck for $20-$30 but still get a good quality deck. For wheels same goes DK wheels, maple wheels will get you a good quality set of urethane, bearing locked wheels for cheaper than the most premium wheels. So there should have been another range of setup in this video, a $80-$100 setup is sometimes all you need to get the same quality as a $150 setup. Support small companies and save more.
Which would you say are the top notch wheels and tuning?
@@emperomassinencambio...9941 top notch wheels: Joycult, illpills, flatface, abstract, labs
Top notch tuning: Dislocation, bracelet bushings, backer bushings, levelup.
Does tuning include tape? if yes: Sponser me tape, fbs, blackvelvet
These are basically the best you can get without any issues (with the product, joycult and lab shipping and customer service is kinda bad)
@@fingerflowfb9247 thanks bro, you helped me a lot!
cooperación internacional de la universidad
D la semana pasada me has respondido ❤❤❤❤❤❤que no me has
Do you recommend the $20 board for somebody who’s a beginner and can do some tricks but not that consistent
You can bc they’re great starter decks but I would honestly recommend getting some nice grip tape (like rip tape or fbs grip tape) and then some bearing wheels (teak wheels would honestly be perfectly fine for just starting out) and putting them on your tech deck
Hi Kelsey. I just wanted to say that I love your videos and you are my favorite RUclipsr!!!! Hope you all are safe.
That’s awesome I love the teal board
I have been fingerboarding with a tech deck deck tech deck trucks and $3 bearing wheels for around 5 years
You saud something that sounded close to laaker, something to do with the pop, what is it
Honestly, if ur just getting into fingerboarding then all you need is a 32mm tech deck, some cheap bearing wheels and some tuning. Just upgrade what you want as you get better.
Keep it up I love your videos and can you do a cheapest amazon fingerboard on amazon
I mean I don’t really want to spend more on a fingerboard than on my actual skateboard so can you do a top 5 best fingerboards on a budget?
my favorite decks are poli decks, those are abt $40 and for the other parts id say get some of those 32mm $10 china trucks and china wheels, the total should come out to be abt $57 plus shipping
Idk why everyone says that bc I got some Berlin wood & blackriver completes and they were like $120 each and my actual skateboard cost like $150 in total so no they don’t cost more than an actual skateboard setup
I just bought a DK deck I’m so excited
That’s a big range
B A N A N A
thats what she said
this made me try teak tuning which introduced me to the bushings and I'm in love.
Broken knuckle are pretty decent and they are only $ 20
I just got real board rails and then it turns out they are 3d printed and don’t screw in or sit well on my deck :(
Use zip tie and double sided tape
What an upload on a Monday
She does talk about if you make your own
Tech decks 2020 performance series, in my opinion closes the gap in the market. with the 12 usd dollar price tag its more worth it and better if not just as good quality than most “budget” fingerboard completes. In conclusion, with this new 2020 series of wooden teck decks its not worth it to buy anything else but to go all out on blackrivers complete
Yo people what’s the best place to get cheap wooden fingerboards
Kelsey I love your vids but I lost my setup that's in my vids😪
love the vids keep it up :)
Damn kelseyyyy 👀👀👀👀👀🥺🥺
Do you imagine a few years forward fingerboard will disappear I am pretty am scared
do you skate?
The teak complete looks way darker on camera than in rl
love the videos!
Yo what up I love your videos plz post more as well 👊🏻
We have the same tech deck graphic flip tech deck
Loyal to the tech!!!!
She´s so beautiful
I love it
u shld review ed decks i have one and there amazinf
For anyone new, woobs won't cost $40... you are usually paying upwards of $200. So just understand that if you want a woob price is a huge barrier compared to other decks
I'm so inspired by you have a good day
Yeah well this week a new video of tech deck Thursday can't wait
Can you give me a set of fingerboard because I don't have any of those plssss😭😭
This vid is awsome!🙂🙂🙂🙂🙂🙂😃😃😃😃😃😄😄😄😄
0:47 thats what she said
Pause
@@pandaman7642 what
Lol
Dude thank you!
Has anybody tried stone wheels already?!
Kelsey someone told me you was capping about giving people boards 🤔
25 years ago a friend sent me one of these (shoutout to SareBear), and now, I realize this is entire industry and all, I had fun doing flips with fingers but c mon kids get out get real boards.
omg pleeeaaaase unbox Tone Tuning fb stuffff
Nice video
love the vids
🔥🔥🔥🔥🔥🔥🔥🔥
I saw a old video of ur and thought this has to be a phase theres no way shes still making tech deck vids after 2 years (thats how old the video i saw was..) lol
I just got one today a cheap pro tech deck but its fun. I remember when tech decks had real grip tape and not like nail file tape
Nah dude she’s sponsored 😂
I’m new and I sub good video
U r my type 😂
🤣 she is lmao
who the fuck would pay that much
Fingerboard + Pretty girl = Perfection
simp
@@boredfingers7798 what are u gay?
@@uhimseggsy2070 no, he's just normal.
Is a skull fingerboard god of not
hello maam kelsey im rj from philippines im a greatest fan of yours hope you noticed me🙂🇵🇭✌🏻
Why are finger board trucks more expensive then real trucks🤣
Me: imma buy a Prep
Kelsey: TEAK TUNING IS BETTER
the reviews: TEAK TUNING IS TRASH
thats so true on Amazon 🤣
I’ve ordered from teak twice, one pack of grip and bubble bushings, the grip was absolutely terrible and the bubble bushings wouldn’t fit on my kingpin because they are too tall which made it impossible to put on my locknut. Eventually I got them on but tbh I don’t know if teak is worth the time in general
@@lasagnafb8625 yeah if you gonna buy fingerboards buy the higher quality stuff that last like blackriver
Does teak have good boards tho because I have Berlin woods trucks just wondering if I should put them with and teak board
@@daniellovejr9438 Teak decks are ok. If you have a teak deck and a Berlin wood deck in each hand you can definitely feel the difference. Berlin Wood feels soo much nicer and better quality. But if you’re just starting out or if it’s all you can afford they’re great starter decks 👌🏻
Omg i need a pro setup but I don’t have money
Wooden fingerboard unboxing
From Philippines💖
plssss come back
Hiii imm i big fan of youu im fromm philippines 🇵🇭
a*
You and fingerboard=L_O_V_E
I just remembered, when I was a kid, I broke
My dad's finger board in half cause I thought you actually rode them and broke me and the board
Same but it was my dad trying to stand on the fingerboard lol
Wait you dad fingerboard ?
yllo boards are 20 bucks are also pretty good
Kelsey, I was wondering: How can you afford all of this?? Are your parents rich or do you have some sort of job that pays for all this?
She has over 80k subs. I'm sure she makes decent money off of youtube alone
i think fingerboarding is rediculous just get a real board and go skate but i liked how you didnt say techdecks are trash you explained it well
i used pro fingerboards so much that I can't use Teck Decks anymore 😂
A real fingerboarder can use either one
👌
hey kelsy
$150 for that? I would just go get a real deck with that and throw on some old trucks 😂
I've always wanted to have a fingerboard but I can't afford one becuz it's too expensive, I hope someone can give me one
David Jones even commented on fingerboards being more expensive than skateboards, David Jones hand makes so many boards in all of his videos, it’s rly not that hard 🤷♂️ yes making a fingerboard is harder to make, but no, they should not be 50$ sorry
$150 fingerboard? My Almost 7.75" with Tensor Maglites, spitfire bearings and Bones wheels only cost $135
Loved this vid
teak setup is just a p rep
niw just gotta wait for the angry hate comments by the 9 yr olds
Agreed
nOooO tEaK tUnInG Is bEtTer tHaN bRoKen KnUckLe
@@pamcakes2172 hero 😤
Just wanna say Hi!
I need new trucks
That's my tech deck lol
I'm 13 I've used tech deck for 4 years and I'm gonna get a broken knuckle
Hello world!!!!!!
Lol the $150 finger board is the same price as my real skateboard
So tech deck is like a walmart skateboard
The new China trucks are better than the teak trucks and teck deck trucks
please indonesian subtitel
Your hair looks nice actually :)
32 mm is normal but 92 mm?!?!?!
Kelsy I really love your videos and I want to work on my kickflips on a fingerboard and I would be happy if you respond to my video of me doing my kickflips on insta
The one who reads this I hope you have a great day and let you know that you’re beautiful. ❤️❤️