Complicated Mold Process Made Easy Using Dragon Skin™ and Mold Star™ Silicone
HTML-код
- Опубликовано: 8 июл 2024
- In this tutorial, Milo shows how to make a gang mold of some complicated wood carved originals using Dragon Skin™ 10NV and Mold Star™ 31T platinum silicone mold making rubber.
Multiple wooden figures are mounted to the base, vent areas are created, and a 2 piece silicone mold is made. Mold Star™ silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Dragon Skin™ silicones are used for a variety of applications, ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.
#moldmaking #casting #sculpture
Dragon Skin™ Silicone: www.smooth-on.com/product-lin...
Mold Star™ Silicone: www.smooth-on.com/product-lin...
00:00 Intro
02:28 Testing For Cure
03:24 Preparing Challenging Figures For Molding
05:25 Mixing And Measuring Dragon Skin™ 10NV
07:12 Pouring Dragon Skin™ 10NV
07:30 Demold Of Dragon Skin™ 10NV
09:19 Preparing Remaining Figures For The Gang Mold
13:34 Mixing And Pouring First Half Of Gang Mold
16:38 Mixing And Pouring Second Half Of Gang Mold
17:54 Demold Of Gang Mold
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
www.smooth-on.com
/ smoothon
/ smoothon
/ smoothon - Хобби
Amasing
Amazing!! Thank You!
Thank you for watching! Don't forget to subscribe!
Amazing video, thanks for the tips! :D
I've never seen that bubble shim technique before, that's brilliant!
Thank you for watching! Don't forget to subscribe!
that was cool,, thank you for the tips
Thanks for watching!
Great video. Is there more information available on the other techniques to deal with a free standing characters legs - Milo mentions that there are other ways to deal with free standing legs. Is there a video with more techniques for this issue? Thanks!
There are some good tips here: ruclips.net/video/fBSsBkkETGI/видео.html
I have a need to make a yellow turn indicator lens for a caravan . It is a curved piece and has been glued to the original red lens at manufacture . Its also glued to a white plastic backing shroud and can only be moulded from one side . Is there any way I can make this ? atm I made a mould of just the outside of the lens mixed and poured yellow epoxy and just kept swirling it around until it set enough not to flow back with gravity. t was not very successful. Any suggestions appreciated.
Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
Are the gloves vinyl? Vinyl does not inhibit with platinum silicone?
Vinyl gloves are recommended. They do not inhibit silicone.
Can this Dragon Skin be used to make a mold for Hydrocal Plaster.. Thanks!
Yes it can!
How can u thicken silicone
You can use our Thi-Vex silicone thickener.
Can you Use Dragon Skin 10NV (Mold) with Dragon skin 10NV (cast model) without CURE INHIBITION???
I hear Dragonskin 10NV does not work as a mold with other silicones...
That is correct. Per the technical bulletin, do not cast other tin or platinum based silicones into molds made with Dragon Skin™ 10NV. They are not compatible and inhibition will result.
how do you get all the clay off
It can be removed by peeling away, and residue can be removed with alcohol.
donde puedo conseguir el plastico de burbuja que utiliza para la division
Contact Reynolds Advanced Materials at www.reynoldsam.com
@@smoothon soy de España