Это видео недоступно.
Сожалеем об этом.
CNC Carving a Googie Sign (Hotel Caravana Redux!)
HTML-код
- Опубликовано: 27 июн 2019
- I recreated my recent Hotel Caravana neon sign as a scaled-down, backlit "can" sign by stacking individually cut slices to form the cabinet.
EXTENDED VERSION
For an extended version of this video, as well as other bonus content, visit / wesleytreat .
GET YOUR VERY OWN X-CARVE!
Use the link www.inventable... for your purchase and help me to keep making videos!
FOLLOW ME
▶ Instagram: / wesley_treat
▶ Facebook: / satelluxe
▶ Twitter: / wesleytreat
▶ Amazon: amazon.com/sho...
▶ Etsy: satelluxe.etsy... & satelluxestudi...
TOOLS & MATERIALS FEATURED IN THIS VIDEO
▶ DeWalt DWE7480 Compact Job Site Table Saw: amzn.to/2naVDlR
▶ Bondo Glazing & Spot Putty: amzn.to/2XwflhJ
▶ DeWalt 20V Max Drill & Driver Kit: amzn.to/2hLB64q
▶ Weller WLC100 Soldering Station: amzn.to/2CRccii
▶ LEDwholesalers Warm White LED Light Strip: amzn.to/2hLPkCo
▶ Mean Well 12VDC 3-Amp Power Supply (See Notes Below): amzn.to/2XB0Klc
POWER SUPPLY NOTES
Regarding the power supply listed above:
▶ I highly recommend the Mean Well series of power supplies, which I've now used for years without a problem.
▶ One spool of the LEDs listed above draws 2 amps DC, so if you're using a full spool, you want a power supply listed above that. I listed a 3-amp supply above.
▶ For other models, search for Mean Well APV. This series goes up to 3 amps. For higher amperage, or for outdoor use, search for the LPV series.
▶ These are meant to be general recommendations and not expert advice. Good luck!
SEE ALSO
▶ Hotel Caravana: Making a Neon Sign: • Hotel Caravana: Making...
▶ Make Anything Look Like Wood: • Make Anything Look Lik...
great vid! and sign!! awesome .. cock.
I can't help but chuckle at the table saw every time it happens ... best ongoing joke ever
I do believe it is from the cartoon The Jetsons
Omg finally! Your vids are always a treat!
I’ll let myself out...
and that, boys 'n girls is why signs are expensive!
That looks incredible. I'm sure the customer is more than delighted!!
That's a great sign! And video! The "NO" lighting up looks fantastic.
Oh man. My stomach hurts after the “wired it up” part. Awesome build!
I learned nothing from this video, yet it was the most satisfying video I've seen this month.
Wesley, that is a work of art!! Thanks for the great video!
Dude, that's amazing and quality work.
Awesome wood look painting technique. Sign looks great!
Wesly, your videos are the best. your camera shots explain the process like nobody else does. YOU TEACH US SECRETS and I thank you for that! Your face time camera presence is professional & light years beyond other youtube makers. your products are superior AND are actually making a profit! keep tubing us vidoes.
great work. The Faux Bois finish (on fricking plastic) is wonderful
interesting, The Fox Boys is the name of my grunge band but we know how to spell.
Love the little "ding" when NO is turned on... Nice editing detail...👍😉
Mr. Treat, I love your work, your videos, your sign and just how talented and skilled your hands really are. I couldn't give a crap about your manicure or anyone who would comment negatively about them. They're just jealous. Keep up the good work sir! I'll go sit down now.
Weird table saw noise, sticky stuff, colors and shining lights! Love that stuff! That thing came out great and the video to!
I have small sign shop and I have recently started watching your video and gave me so inspiration
Great work, makes me want to get back to my XCarve! Hell of project!
Fantastic sign
Love the wood-look paint technique!
Wow. What more can I say? Just wow.
Still love the noise you dub over the saw. 👍😁
Nice job. The layering technique is great to watch. Sort of like additive manufacturing. 2D to 3D!
Awesome man! Haha so many parts had me laughing out loud. I needed that. Thanks !
excellent work, total quality
Wow, I love watching someone who has mastered there craft. I started watching to see if I could make a lit name sign I could use in a winter rv park we stay at. But no way I coud do what you do. Make a how to video the average Joe coud do.
Me, I'm just an average Joe who kept trying stuff till he found what worked. Go ahead, give it a try!
Love to see you working! Very clean & very thorough.
Looks awesome!
As you said, Very Satisfying
Just an idea I had: you could mill 2 or more holes in every layer of your enclosure, and then put a rod through to perfectly align them while gluing. I think that would have made your sanding work easier. And the whole thing more sturdier :) Great video though!
@2:29 Laughed my FAO!!! that was funny AF. thumbed up.
Another great video. Glad to see you back.
Glad to here you didn't forget about the table saw noise 😂😂
Looks good! No way was it as easy as the video made it seem.
Thanks for sharing!
Wow that’s awesome.
LOLd at the three "wired it up" takes ..glad you left em in.
Great job!! 👏🏼👏🏼👏🏼
I loved the video. I appreciate all the extra sound effects and outtakes. Do you have a problem with standing water on top of this sign?
Beau travail!! good job
Incredible.
Pretty neat Westley Treat 😀
When I was trained to use a CNC router I was told that placing all the entry/exit points in corners would cut down on filing time. The idea was that everytime you cut something there is an inevitable bump from the endmill and on straights it was more noticeable. I always wondered if it's a fluke on our machine or a problem all CNC routers have.
You never cease to amaze me
Really nice video. Thanks.
love the googie
Bloody fantastic work!
You should pick up a drag knife for doing things like cutting that vinyl. V-Carve has a plugin for generating drag knife paths.
Great video I'm a sign guy too and if that pvc is celtec or sintra I use these bits on the cnc, they are cheep and work great, no need for tabs or tape, I just put a few brads around the edges and the down cut leaves the dust in the cut to keep it in place. HOZLY 3.175X2X12mm Left Hand Single Flute Downcut Spiral
And I think it's conventional cut that leaves the burs on the off cut.
Very nice workmanship! 😎👍🏻
Very good job 👏🏻👏🏻👏🏻
I wss bothered about the insides of the letters missing. Soooo close to a thumbs down. When you put them in, a sigh of relief came over me. Wonderful craftsmanship.
Very Nice my friend. Love all your videos.
Thanks for sharing.
That came out very nice!
That was awesome! Thank you for the inspiration.
Wow, Can't believe I just found this channel. Awesome work bro!
nice work!!!
I love watching sign makers wireding up their work.🤣 🖤🤘🏻
Good tips and funny.
Another great build
Gorgeous work,as always! Inspirational / Aspirational.
Awesome work Wesley. Love it :)
Fantastic as always!
You have a great eye for details and layout, it's perfect! I also use VCarve, and wondered if you've experimented with "Climb" vs "Conventional" in your settings? It looks like you're getting a better finish on your scrap in some cases, and switching to "Conventional" might change that for you and save time finishing.
Bloody epic 👍
You are so funny 😁.... I love your vlogs.
Simply "WOW!"
Why is it why a new video drops, i drop everything to watch? You have amazing talent and it is so awesome watching your work. More vending machine videos!!!! I wish you were out west, I would commission your talent for a new game room in a house I'm building.
I ship anywhere! 👍
Respect..cool trics for wood efect...
Dope !!!Amazing techniques!
Great work on both the sign and the vid!
Always enjoy your vids
once again top chap old sport absolutely spiffing
Good take away re VCarve ~ Pro. Just waiting on my first 2' x 4' table and have a DIY 4 x 6 in the works. Have not decided on what Vectric product I will use. But I am not rich.
Many adventures ahead.
The great thing about Vectric is that, if you buy a lower-cost package to start, they'll only charge you the difference in price if you want to upgrade later.
If I can just get over their truly horrible archival video tutorials.:-) and hey forgot to mention how nice it is to find a new exciting and eclectic maker that YT was hiding from me! Regards
impressive
Nice sign and great video
Love the editing. Cheers! : )
Nice!!!
Always excellent! 👍
That painted foam looks more wood than actual wood!
Looks SO good! Great video 👍
George Jetson called. He said somebody stole the motor out of his flying car to build a table saw.
Cool.
Magnifique !
Nicely done 👍 question though, how long before nature destroys your beautiful workmanship?
New subscriber 🔥🔥🔥🔥 Here from GOT IT MADE channel!!!
you should buy a drag knife for vinyl. will be more easy for you. great video!!!
Thanks! I do have a vinyl plotter, but for these general shapes, it was easier to just cut them out by hand.
Wood effect was nice, how did you protect it against uv and heat damage?
0:18 the jetsons car? hahaha
Awesome work!! The only thing I would have done differently regards the construction of the "body" of the sign. Instead of cutting numerous pieces and stacking and gluing them, I would have cut two (or maybe 3) of them, and cut some "standoffs" to make a skeleton frame. Then I would have wrapped it in fiberglass. Would have saved on the cost of materials.
Thanks! However, using 3 layers instead of 5 would've saved only about $18 in Sintra. And most of that material is reclaimed from the centers and can be reused. At this size, I'm not sure there would be any cost benefit to using fiberglass and resin.
@@WesleyTreat thanks for the info. Quick question, what thickness is that Sintra sheet? The thickest i can find is 1/4", but that stuff looks thicker.
@@monteporche5552 I used 3/4" for the body, 1/4" for the faces, and 1/2" for the "flange" on the back. You can also try looking for Komatex or just expanded PVC sheet. I get mine from a local plastics supplier.
Amazing!
nice job... what brand of tape do you use to hold down your blanks? ...when I stack material, I always find a way to pop in some sort of locating holes... then I can use a dowel and align as many layers as I want perfectly, and they don't shift during glue-up.
Awesome!
I really wish my table saw sounded like that.
Outstanding!! How about a link to the type and source of PVC?
It's just expanded PVC, often sold as Sintra or Komatex. I get it locally.
Nice!! Amazing... :-)
I have vcarve desktop also, maybe sometime you can show us how you set up the program to cut on an angle like that?
I just rotated the vectors until they fit in the available space. 👍
Your work looks awesome 👌 where do you source your acrylic and pvc sheets
Thanks. I get them locally in Dallas.
liked AND subscribed
Any chance you could add a link of where you get the pvc sheets from. Thanks for the video, nice work!
I get it locally at a place called Allied Plastics.
Could you give a link to the material you used? Thank you. Love your videos.
I bought it locally, but you can find it as "expanded PVC sheet," also sold under the brand names Sintra and Komatex. 👍
I was cussing you all the way to the end until you added the holes in the O's, A' e's And such. Then I saw how funny you were and subscribed.
Oh...RUclips is really messing up sending viewers like me away. The ads does run audio or video or both. If I use my Puter I can't watch because they say I'm using an ad blocker but it been turned off on RUclips as long as I've been on the internet. Something is really wrong within platform and you should consider other venues.
You're funny as hell and I'm binge watching.