This message is for those people who are new in the electronics projects and are in the last year of their institution semester. I was worried about my college project and with stressed mind i continuously scrolling down in to the YOU TUBE for getting a hint how to do a electronics project, i was so naive that i don't even know what's Arduino 🙂 ... So after searching for about a week i finally found prateek sir's you tube channel... I contacted sir and tell him about my problem and he politely helped me through out the time ... And guyzz this channel and the person is very "trustworthy" and i am satisfied with their work ... Thanks for everything sir and your team ... You guyzz are awesome ❤️
Arduino Gps And Gsm Based location Tracking System Video Out :- ruclips.net/video/OJpLHocGgDU/видео.html Code And Circuit Diagram :- justdoelectronics.com/arduino/
Aur ek system hota hai ki hum khud us no pe mssg karke unka location track kar sakta hai with the help of gsm. So my question is can we combine this two projects ?? Ek push button wala + sms wala !! ?????
Hi im thinking do tjis project do u think it will work some teachers are saying it will not work because it uses 2g net work plz reply i really want to do this project
Hey brother nice work If I will place the GPS module to 10 -15 CM away from its original position will the serial monitor show different value What us the minimum distance in which the data of GPS changes
hi the code not work int state = digitalRead(5); if int state == 0 { float flat, flon; unsigned long age; C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:66:7: error: redefinition of 'int state' int state = digitalRead(5); ^~~~~ C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:15:5: note: 'int state' previously declared here int state; ^~~~~ C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:68:3: error: expected unqualified-id before 'if' if int state == 0 { ^~ C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:92:5: error: expected unqualified-id before 'else' } else { ^~~~ C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:95:1: error: expected declaration before '}' token } ^ العثور على عدة مكتبات لـ"SoftwareSerial.h" مستخدم : C:\Users\suhai\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.2\libraries\SoftwareSerial غير مستخدم : C:\Users\suhai\Documents\Arduino\libraries\SoftwareSerial غير مستخدم : C:\Users\suhai\Documents\Arduino\libraries\SoftwareSerial-master exit status 1 Compilation error: redefinition of 'int state'
This message is for those people who are new in the electronics projects and are in the last year of their institution semester.
I was worried about my college project and with stressed mind i continuously scrolling down in to the YOU TUBE for getting a hint how to do a electronics project, i was so naive that i don't even know what's Arduino 🙂 ... So after searching for about a week i finally found prateek sir's you tube channel... I contacted sir and tell him about my problem and he politely helped me through out the time ... And guyzz this channel and the person is very "trustworthy" and i am satisfied with their work ...
Thanks for everything sir and your team ... You guyzz are awesome ❤️
Love it. Congrats and another like. Waiting your visit again.
Thank you! Cheers!
Arduino Gps And Gsm Based location Tracking System
Video Out :- ruclips.net/video/OJpLHocGgDU/видео.html
Code And Circuit Diagram :- justdoelectronics.com/arduino/
Instead of Arduino nano can we use Arduino uno
@@nikhitajagadale2657 yes ma'am
Sir kya sim main sms ka recharge krna jrore ha kya please give answer 🙏🙏🙏🙏🙏🙏
@@NishantSharma-uq1mh yes
@@JustDoElectronics thank's for reply
Sir do we have to give power supply to Arduino nano and gsm from different sources?
Sir,but u haven't show the server part...how server is connected to the aurdino board to send location??
Sir kya mai is GSM
ke jagaha Sim800L gms use kar sakte hu please reply karna sir 🙏🙏🙏🙏🙏
This works great!
Keep going
Thanks
@@JustDoElectronics sir can i have the code?
What type of software you used for making circuits
Aur ek system hota hai ki hum khud us no pe mssg karke unka location track kar sakta hai with the help of gsm. So my question is can we combine this two projects ?? Ek push button wala + sms wala !! ?????
is very useful project 👌
Yes, thanks
Sir kya sim main sms ka recharge krna jrore ha kya please give answer 🙏🙏🙏🙏🙏🙏
yes
hi ,can you please explain the connections between gps module and aurdino nano are not clear.if you mention gps pins that could be so helpful
What will be the changes in program if I use Skylab Gps and. ARDUINO UNO. Please help it's a request
Sir I am not used skylab gps module plz contact to my team sir
Sir which software you are using for software circuit connections and which version?Is this is a proteus software?
fritzing
Sir please answer, I just need it for my final project. Can I replace the SIM900A with SIM800L?
yes
Last question sir, still same code and wirings with this one even if I replace it with SIM800L?
Sir are you still there? Please answer mee just for my project :((
Bhai sima kit wala program bano na e krishi wala for tractor based
Could you please tell me where is the power source for the project in this video
Hi im thinking do tjis project do u think it will work
some teachers are saying it will not work because it uses 2g net work plz reply i really want to do this project
Yes Is Work
@@JustDoElectronics I dont require 2g sim and I can do it using jio?
@@unknownxyz7425 You used 4g sim but not jio
Sir you make circuit there are so many wire but in last wire actted with pcb please help me
sir contact my team 8830584864
@@JustDoElectronicscomo eu faço pra entrar em contato com vc
please tell how to you select in which phone this message will be sent
in code
Can i use this gsm to send lat and longt. To my firebase database?
If you have knowledge then do that
Super video
Super
Is it gsm supports 4g sim
Can u send me the fritzing part link of SIM 900 module u have used in this video
We can do this with arduino uno
Como eu faço pra entrar em contato com vc
Bro we r doing the same project I need help from u
It requires coding ? Please provide the code
Check it sir I provide it and is freee
Website is not opening plzzz help sir
can i use sim800v2?
yes
How much is Total Cost for such project ????
Around 5000
@@JustDoElectronics ok sir, can you suggest similar projects which can be done 5 people max in a group and budget around 1k - 2k , please?
@zoro_065 sorry I don’t know
Hey brother nice work
If I will place the GPS module to 10 -15 CM away from its original position will the serial monitor show different value
What us the minimum distance in which the data of GPS changes
Bhai gps module tera to pass hee hai to fir phone me Kyu 4min ka rasta dikha raha hai??
is not show accurate
Sir code me error aa raha hai kya aap upload kar ke bata dege
Please
how can I call you for a project ?
Check the mobile number available
Hello sir
yes
I tried this project but the gps cannot blink and it does not work why ? even though the gsm is on
Which Gps you Used ?
Gps: Neo6M gps module
@@KeerthanaG-fm8vv i Think is small antenna that's why is not work
Where we will get the 2g sim now
you used any SIM card
Can you off and on the sound?
Can u please tell me the actual cost of one piece
Good Day Sir! Thank you for the tutorial, Please Can I have the source code sir?
In the description
@@JustDoElectronics sir can you pls accept my rqst for code
How much this price ?
bhai pcb india me bahut achchi bantihai
bro ca n i get the code please i need it for my project i will assure you iw wiil put you in my research that you help me
Where we want to type our phone number in ardiuno
can you show us the connections clear
sir code does not work sir pl replay
Ok we check and update it sorry for that
😊😊
Bro how directly the message came to your mobile
In GSM Through
how i can try to create?
Sir, how to get ur code?
Check description
@@JustDoElectronics give me excess bro
I've requested you for the code. Could you please give me the access?
👏🏻👏🏻🤝
I need this project code?
Check description
I need a code
Please you can send and help me sir
can you please provide code for this project
warning: overflow in implicit constant conversion [-Woverflow]
int raw = 1000000;
is it bad?
Anna I want project pdf in this topic
contact 8830584864
@@JustDoElectronics I want to
Sir massage nahi aa rha
Please share source code because can't open your link
ok
Give me access the code
Anna source code plz
I need a code
Can you please accept my request for the code?
poor audio,
Yea i know is old video
Sorry for that
Please say the code
check website
If you are not in youtube delete the channel. Because people will keep asking.
Why you wasting your money and time 🕰️
hi the code not work
int state = digitalRead(5);
if int state == 0 {
float flat, flon;
unsigned long age;
C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:66:7: error: redefinition of 'int state'
int state = digitalRead(5);
^~~~~
C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:15:5: note: 'int state' previously declared here
int state;
^~~~~
C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:68:3: error: expected unqualified-id before 'if'
if int state == 0 {
^~
C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:92:5: error: expected unqualified-id before 'else'
} else {
^~~~
C:\Users\suhai\AppData\Local\Temp\.arduinoIDE-unsaved2023029-3132-10gyb9g.p84p\sketch_jan29a\sketch_jan29a.ino:95:1: error: expected declaration before '}' token
}
^
العثور على عدة مكتبات لـ"SoftwareSerial.h"
مستخدم : C:\Users\suhai\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.2\libraries\SoftwareSerial
غير مستخدم : C:\Users\suhai\Documents\Arduino\libraries\SoftwareSerial
غير مستخدم : C:\Users\suhai\Documents\Arduino\libraries\SoftwareSerial-master
exit status 1
Compilation error: redefinition of 'int state'
I've so much confidence in this dude *Meshtoolz*
What app do you use to design circuit diagram?? help i need to know
I also want to know 🤦🏻♂️😂
@@ripperguardiangaming1065 i think he use fritzing
Ok thanks brother
How to fix the error of does not name type
I've so much confidence in this dude *Meshtoolz*