Sonoff Zigbee Motion Sensor
HTML-код
- Опубликовано: 15 янв 2022
- #sonoff #motion_sensor #zigbee
Have look at Sonoff Zigbee 3.0 Motion Sensor (SNZB-03), Set it up and see how it works.
Invitation Link to join my Exclusive membership:
/ @kian.smarthome
You can SUPPORT me by sending Tether(TRC20) to my Wallet:
TWYW9vhcTtwWFQJWzhKrGkDedYCQvV84kv
BUY ME A COFFEE:
www.buymeacoffee.com/kian.sma...
#snzb_03 #smart_home #home_automation #bms #automation #iot #sensor #pir_sensor #z-wave #zwave #wifi #tuya #integration #bluetooth #security #peace #comfort #energy_saving #home_assistant #esp #esphome #esp32 #development_board #philio #mcohome #heltun #fibaro #thermostat #smart #smart_sensor 
Наука
Great video. Thank you so much!
Clear explanation thank you!
Thanks for including a short description of zigbee 3.0.
I’d like to know more about what support for regions means. Does it mean that the correct radio frequency is used for the region?
Nice explanation. thanks
Wow very Nicee videeo
Umm I am your old subscriber
When u have 200 subscriber You growed so much man and u deserves so happy for you ❤️
Thank you a million ❤
I have the black version rf bridge, does the motion sensor work with that bridge also?
Hi, No, As you mentioned yours is RF and this motion sensor is Zigbee.
I use the Echo4 Zigbeehub and i wirks but I cannnot configur the sensor. Maybe you know hw can I add this in the ewelink App (Skill activated in Alexa) to Setup tge distance and range of the sensor?
Sorry for late reply, the sensor does not have any specific setting
Thank you for this nice description,. When I do pairing, I find a window showing button 1, button 2, alarm and no pairing whith the sensor.
I find a different window for pairing. Please can you help me?
You're welcome. Do you have other zigbee devices near your motion sensor? specifically another gateway?
Have you tried resetting your motion sensor before pairing?
@@kian.smarthome Thank you for your rapid response. I do not have any working ZigBee device. Once I paired the bridge I updated the firmware and after that I couldn't pair the motion sensor or the door sensor.
@@ehab0dr you're welcome. check batteries of your devices.
none of door sensor and motion are successfully paired?
After checking batteries try resetting gateway and setting it up again.
By the way, Is your gateway Sonoff?
@@kian.smarthome I changed the batteries and I did reset many times. Is the update the reason?
عالی دادا🙌
🙏🙏🙏
Do you need the hub? ive used switches from sonoff that directly connects to the ewelink app.
for using Zigbee devices hub is needed
@@kian.smarthome is there a motion sensor that doesn't require a hub, and supports google home?
@@azimalif266 Yes, you can use Tuya ones
Did it support other Zegbee bridges? example Tuya
Once I tested it with Moes and it worked. Generally they must be compatible but to my experience this may not happen with some brands.
I cant change the mode from normal to alarm mode so pir device is working every60 seconds do you know how to change the mode, in manual i have read if you hold the button for 5 sec it should start flashing green but after 5 sec it go to pairing mode
Could you tell me where exactly we have the mode section in Manual? You tell me then I will find out how to do it .
Thanks for Quick reply, it is where "Led indicator status instruction"it says green Led stays for 5s- but there is not even green Led in device
@@kamilek6321 Again I checked the manual on manufacturer site, not such a sentence was mentioned in it.
Could you paste the URL of yours?
Any recommendations for a cheap presence sensor that works with home assistant?
this model is cheap. Also you can make one yourself:
ruclips.net/video/opUb_FG1BPE/видео.html
Does this sensor supports other Brands zigbee gateway hub?
It must be supported but I am testing it with other hubs too
Hi friend. Did you try to integrate them with Home Assistant? Any tips?
Hi, yes the video is on channel
Instead of using sonoff usb dongle to pair zigbee devices such as motion sensors etc can I add the sonoff zigbee bridge instead?
@@margeo20 In this case you must pair your devices using ewelink App then integrate ewelink with Home Assistant.
ruclips.net/video/yQYObXTdhCI/видео.html
Thank you friend. Thats what I was looking for! Also there is currently an ewelink integration. Maybe this works like the sonoff integration without Hacs addon.
@@margeo20 🙏🙏 yes that works too
How many sensors we can connect with one bridge?
up to 32 devices
Is it compatible with zigbee2mqtt dongle ?
a test is needed to be sure. I will soon upload its video
This sensor can be used by himself without bridge?
Thanks
This model no, For single use without bridge you can use WiFi models
Do you know if it works with Smartthings?
Unfortunately NO
@@kian.smarthome are you sure?
@@geo555 I meant I do not know if this sensor works with Smartthings
This sensor is not good at all. A lot of people (myself included) have issues, including random triggering and low battery life.
I just abandoned SONOFF products and moved to TUYA, which is a lot better.
To my experience wireless motion sensors have issues. But I have to confess that they working flawlessly really depends on the environment.
May I know what Tuya motion sensor you are using now?
How many sensors we can connect with one bridge?
up to 32 devices