This video worked with two key fobs. I followed other's directions and it did not programming. You video is well done and I followed it (not the other instructions) exactly. The new key fob was programmed and everything worked!!!! Awesome, Thank you!
Thank you, I bought two key fobs from Amazon. I had one really broken key, I have to hold the two haves together but it would still start. The second key was the manual backup key. I follow the steps you outlined to the letter, and the new key fobs work perfectly with all functions including remote start. Thank you very much!
I don't know if anyone has mentioned this yet - but if the key FOB doesn't open the side doors or the doors don't open automatically when you pull the handle - on my 2010 Town & Country there are switches on the ceiling console that will open/close the doors. The end switch on the passenger side shows on/off. If this switch is off the the doors can only be operated manually. I discovered this the hard way thinking I had an electrical issue for a few days. I bumped the on/off switch when cleaning my van one day.
Thank you, showing me this helped me fix my key fob so that the trunk lift remote worked again! It was easy and I cleaned the contacts with 600 grit sandpaper (very carefully, you CAN do too much!). You made my whole week with this! Again, thanks!
I had the same problem (on both keys) and thanks to you and this video you have saved me and my family from being stuck on an island at midsummer holidays. (I need to go with the ferry on sunday and be at work on monday, EVERYTHING is closed now). But thanks to this very well done video I located the error (the chip was lose on the other side) and with a short touch with the soldering iron it was fixed and the car started!!!! Thank you SOOO much! You are the best!
Not sure but I believe Chrysler did a recall a few years ago and removed that programming capacity. The pretext was to fix the problem with a key with a bunch of keys on it would be heavy enough to shut off the ignition while you were driving. Remember that situation? They also removed the programing capacity. I really think they did that because the dealers didn't like the competition. People could buy a cheap new blank and do it themselves. Now they have to go to the dealer and the dealer prices have skyrocketed as a result.
Update: There has been a recall out involving these Chrysler keys. Our van had not yet had the recall, so we took it in to get it. They replaced the whole ignition module and issued us two new keys. Now the old ones no longer work. However, the Amazon keys never did quite work as good as the factory keys. I couldn’t open one of our side doors with the old key. The wife’s key opened everything. Now with the new factory keys after the recall, the ignition is tight and the keys do it all.
thank you so much for posting this information. I forgot all about the recall outstanding and was looking down the barrel of replacing two keys for over $200 I just called and they're going to replace the ignition and keys for free.
You should be able to go through the steps of programming the key again. This usually only works with a new key. But I believe it will work with your keys because they were programmed to your car originally
Thank you for this information. We just took the car from dealership with electrical problems. They told my father he had to come back, he never told me. I had been reseraching getting new key fobs and purchased some. They told him $400 to purchase and program a new key fob $300 of that was for programing. I just found out today they have ordered the new ignition module and will call him back when it is in. thanks again
Thank you very much for your video! My key stopped working last night, not having any problems with it before ever. My van is T&C 2014. I cleaned everything and tried new battery, but it would not work anyway. So I must get a new set!
Thank you Mark, my dealership Brown's in NY has been jerking me around for almost two years with that recall telling me they don't have the parts, now I can do it on my own, thank you very much!
Eres la pura reata neta , no podia prender mi van ,en el tablero salia BAD KEY. Abri la llave y estaba dessoldado tal como en el video lo solde y listo GRACIAS man.
There’s also a recall on your ignition on these 08-10 Dodge vans which replaces ignition switch and 2 key fobs at dealership for free. Check to see if your recall was fixed. If not get it done free.
My 2009 Caravan was recalled in 2018. The ignition keys would 'Fall out' if it hit a bump, the van would QUICKLY STOP dead! For the RECALL: 1-The dealer installed a NEW ignition switch assembly (keys secure and tight) 2- They REPROGRAMMED the system to "Bring it up to date", RESULT, I can no longer program new keys myself.
For my Chrysler T&C 2010, I tried several times to program my new keys I bought from eBay, I am following the way you have shown in this video but no luck, can anyone suggest what step/steps I might be missing or not doing it right.
Hey Mark I have a '08 has intermittent issues even with a new battery works most of the time if I'm on top of the vehicle bit today thank God for manual keys since I had to utilize it.and the thing worked to start the thing. I tried to program a spare key I have but I can't seem to have any luck. Any ideas? Watched a vid on replacing the WKN module and wow it's a pita to do and you also have to have the ecu paired to start the thing
I have 2010 dodge caravan I have two old keys that they wore out, I bought two new keys but it does not get program I have watched your video and a few others but have not be able to program my key any help?
Same here. My 2010 doesn't get into programming mode even though the highly rated Amazon vendor said it would self programmer. I read in comments somewhere that the 2010s changed mid-year, and that the later 2010s wouldn't self program... or something like that. Also, after the new key fails to start, I get the message "badkey".
Good Afternoon, do you know how to program controller to unlock doors? just purchased a Journey 2010, which i think is the same, please advise! thank you in advance!
Clean the corrosion off of the green circuit board using rubbing alcohol and Q-tips. Make sure to clean the whole thing, where the battery goes, between the traces, etc. You can take something pointy to scrape a little between the close traces to make sure current isn’t jumping across. Then throw a new battery in and see if you can get it to work enough to work. If you can get it working enough, and have another key, you can program a new one. But you NEED two keys. Otherwise, a dealer or locksmith are the only options.
Nope, one key will not work. However, Chrysler had a TSB out where they replaced the whole ignition module. They gave 2 new keys with it. Might be worth checking into to see if your van had it done or not.
I have a 2014 Town and Country and I have lost one fob so I bought 2 new fobs online. I tried the steps you suggested in the video but it would not start the engine. Is there a way to make this work for my 2014 model or do I have to go to the dealer? Thanks.
If you do not have 2 working keys, you can’t make spares. I had one working and one broken, fixed the broken one enough to work. With a single key, you’re stuck with a locksmith or dealer. However, you may be lucky enough to fall within the recall. Check with your dealer.
I have a dodge journey key fob that doesn't work with the buttons how do I fix and I tried replacing the battery but didn't work so is it possible to buy another one and then reprogram it
I don't understand why you would need more than two keys. It's kinda stupid that you need two keys to program additional keys. Question: can you re-program used keys from craigslist?
It’s actually kinda smart on their part. When you buy the van new, they give you two keys. Each key is programmed differently. Only the owner would have access to both of those keys, so only the owner can program more if they need extras for more drivers, etc. It’s not meant to fix broken keys. They want you to go to a dealer for that. The process in the video is kinda a way to get around that by fixing a broken key enough to use for programing more. If you only have one key you’re stuck with going to the dealer (or maybe a locksmith can do it). There’s also a limit to how many keys you can do this way before requiring a dealer reflash.
I have no idea why, but I can not get this to work on my 2010 grand caravan, the only ding sound i get is from my oil change message and no flashing light. Does anyone know a way I can do this?
I have Dodge Jorney 2010 key fob and it stopped working and after using spare key to open car it doesn't let me start the car with the key fob that goes in the ignition. Can anyone tell me why and help me?
Hello. I have 1 working key i bought 2 new but it doesn't work for me what do i have to do if i have 1 working key ? anyone please help me out with it.,. thanks guys
So, you can't program these keys unless you have two working keys? I only have one key for my van, the only option I have is to pay the $300 for a new Keyfob?
DarakuTenshi You’ll need two in order to program yourself. I fixed my broken key enough to work giving me a second, then used that to program new ones off Amazon. Otherwise, you’ll be forced to go through a locksmith or the dealership.
My problem isn't the same as yours (thank God). Mine is just none of the buttons work anymore, so I ordered a fob hoping to use the rubber sheath with the metal contacts for the switch. Eventually I'm sure I'll end up with problems like you ran into... luckly I'm no stranger to a soldering iron.
It would just be nice to have 2 keys for the van. I just made a copy of the external entry key so if we lock the keys in the car again we can at least get into the vehicle.
Take it to the dealer to check if the van has had the ignition module recall. If it hasn’t, get it done and you’ll end up with two brand new keys. If it has, you’re stuck buying another key at the dealer.
Just livin’ with Mark I bought it from a “private” dealer... I guess he has “dealer status” but sells car from his house,... are you suggesting I take it to a bog time dealer to find out if it had that recall done?... and then if not, I pay for that recall and I’ll get 2 keys provided with that recall?
Prairie Climber If it needs the recall, the Dodge dealer has to do it free. The new keys are part of the ignition switch recall. It doesn’t matter where you bought the vehicle. If it’s a dodge and needs the recall, the dodge dealer has to fix it.
Just livin’ with Mark awesome!... thanks for the info... it’s COVID-19 easter weekend, i’ll try tomorrow (sat, dealer still open)... if not, stay safe!, thanks!
Not sure what to say. It has worked for many others. My van had the recall done, so it’s got a new ignition switch and two new factory keys now. Maybe your T&C still needs the recall. Check with a Chrysler dealer. That recall came out a few years back. Cars were shutting off while driving because the keys would fall out.
Insert old working key. Turn acc on. Wait. Insert 2nd working key. Turn acc on. Wait till flashing light at bottom. Insert new key, turn to acc. Wait to hear chime .. Programmed
If both keys are having the same problem, than it seems like the issue would be the lowest common denominator... something to do with the car itself. I would start diagnosing the issue by changing both batteries so you know the keys are fresh. It could just be that. Otherwise, I would focus on the car itself. Figure out how the car receives the signal from the key. Etc.
I’ll say the same thing as the last guy. Bullshit. I did exactly what you said which is exactly what he said on a 2010 Town & Country and it did not work. Stop putting false information out there for people like me trying to save money for my elderly parents.
I’m not sure why this didn’t work for you, as it has for many others. Calling it bullshit is your opinion tho and I can understand that opinion. If I couldn’t get a simple fix to work that I had seen on RUclips, I would think the same thing. However with the mostly-positive response to this video, I would think that there is something about your particular vehicle/situation that is prohibiting this fix from working. Some time after making this video we received a recall notice in the mail over the ignition switch on our van. They replaced all of it for free under this recall and gave us two brand new Chrysler keys. I would suggest checking online to see if your vehicle was one affected by this recall.
This video worked with two key fobs. I followed other's directions and it did not programming. You video is well done and I followed it (not the other instructions) exactly. The new key fob was programmed and everything worked!!!! Awesome, Thank you!
Thank you, I bought two key fobs from Amazon. I had one really broken key, I have to hold the two haves together but it would still start. The second key was the manual backup key. I follow the steps you outlined to the letter, and the new key fobs work perfectly with all functions including remote start. Thank you very much!
I don't know if anyone has mentioned this yet - but if the key FOB doesn't open the side doors or the doors don't open automatically when you pull the handle - on my 2010 Town & Country there are switches on the ceiling console that will open/close the doors. The end switch on the passenger side shows on/off. If this switch is off the the doors can only be operated manually. I discovered this the hard way thinking I had an electrical issue for a few days. I bumped the on/off switch when cleaning my van one day.
Thank you, showing me this helped me fix my key fob so that the trunk lift remote worked again! It was easy and I cleaned the contacts with 600 grit sandpaper (very carefully, you CAN do too much!). You made my whole week with this! Again, thanks!
You can clean to switch contacts with a pencil eraser.
I had the same problem (on both keys) and thanks to you and this video you have saved me and my family from being stuck on an island at midsummer holidays. (I need to go with the ferry on sunday and be at work on monday, EVERYTHING is closed now). But thanks to this very well done video I located the error (the chip was lose on the other side) and with a short touch with the soldering iron it was fixed and the car started!!!! Thank you SOOO much! You are the best!
Not sure but I believe Chrysler did a recall a few years ago and removed that programming capacity. The pretext was to fix the problem with a key with a bunch of keys on it would be heavy enough to shut off the ignition while you were driving. Remember that situation? They also removed the programing capacity. I really think they did that because the dealers didn't like the competition. People could buy a cheap new blank and do it themselves. Now they have to go to the dealer and the dealer prices have skyrocketed as a result.
Thanks for sharing this...I recently purchased a 2010 Dodge caravan
If only one key, you have to get all keys programmed at dealer or alike. This is for making more before. GREAT VIDEO !!!
Update: There has been a recall out involving these Chrysler keys. Our van had not yet had the recall, so we took it in to get it. They replaced the whole ignition module and issued us two new keys. Now the old ones no longer work. However, the Amazon keys never did quite work as good as the factory keys. I couldn’t open one of our side doors with the old key. The wife’s key opened everything. Now with the new factory keys after the recall, the ignition is tight and the keys do it all.
thank you so much for posting this information. I forgot all about the recall outstanding and was looking down the barrel of replacing two keys for over $200 I just called and they're going to replace the ignition and keys for free.
You should be able to go through the steps of programming the key again. This usually only works with a new key. But I believe it will work with your keys because they were programmed to your car originally
Thank you for this information. We just took the car from dealership with electrical problems. They told my father he had to come back, he never told me. I had been reseraching getting new key fobs and purchased some. They told him $400 to purchase and program a new key fob $300 of that was for programing. I just found out today they have ordered the new ignition module and will call him back when it is in. thanks again
Thank you very much for your video! My key stopped working last night, not having any problems with it before ever. My van is T&C 2014. I cleaned everything and tried new battery, but it would not work anyway. So I must get a new set!
Thank you Mark, my dealership Brown's in NY has been jerking me around for almost two years with that recall telling me they don't have the parts, now I can do it on my own, thank you very much!
What if you have only one working key.?
Did you ever figure it out ??
Nice instructional video. I've got a few extra ones that came with my used van and didn't know why, so this info is good to know. Thanks.
Eres la pura reata neta , no podia prender mi van ,en el tablero salia BAD KEY. Abri la llave y estaba dessoldado tal como en el video lo solde y listo GRACIAS man.
Nice!! Ive got some spare keys cut, but they only work for the door. Hopefully this will work for them to start the van as well.
I have the opposite problem. My wife's key starts the car but doesn't unlock the doors. I was told it would be hundreds to replace the fobs chip
There’s also a recall on your ignition on these 08-10 Dodge vans which replaces ignition switch and 2 key fobs at dealership for free. Check to see if your recall was fixed. If not get it done free.
Do you know if there was a limit on the timeline on the warranty of this?
My 2009 Caravan was recalled in 2018. The ignition keys would 'Fall out' if it hit a bump, the van would QUICKLY STOP dead! For the RECALL: 1-The dealer installed a NEW ignition switch assembly (keys secure and tight) 2- They REPROGRAMMED the system to "Bring it up to date", RESULT, I can no longer program new keys myself.
Unfortunately, I think I’m in that boat myself. We had the recall done. Nice having brand new keys, but won’t be nice when one of these breaks.
Works like a charm man. Thanks
2010 Chrysler Town & Country.
For my Chrysler T&C 2010, I tried several times to program my new keys I bought from eBay, I am following the way you have shown in this video but no luck, can anyone suggest what step/steps I might be missing or not doing it right.
Did Everything you said but when I entered the new key the red light does not stop blinking and it won’t program mines a 2010 caravan
I know you said this was for a 2008 to 2010 I have a 2013 van would this programing technique work for my vehicle do you know?
Can you use a used one to another vehicle?
Very well explained and helpfull
Hi my friend. How can I program my new key if I have only one original
Dude get a life and ask Dodge! Cant you tell it's a security feature to keep a valet or clever kid from borrowing your car and becoming a thief?
Hello really good video what happen is the light do not blink?
Thank you very much bro uuuweee i thought i had to buy a new one
Thank you! I'll give this a try.
Hey Mark
I have a '08 has intermittent issues even with a new battery works most of the time if I'm on top of the vehicle bit today thank God for manual keys since I had to utilize it.and the thing worked to start the thing.
I tried to program a spare key I have but I can't seem to have any luck.
Any ideas?
Watched a vid on replacing the WKN module and wow it's a pita to do and you also have to have the ecu paired to start the thing
Thank you buddy
This also works on Routon
I have 2010 dodge caravan I have two old keys that they wore out, I bought two new keys but it does not get program I have watched your video and a few others but have not be able to program my key any help?
Same here. My 2010 doesn't get into programming mode even though the highly rated Amazon vendor said it would self programmer. I read in comments somewhere that the 2010s changed mid-year, and that the later 2010s wouldn't self program... or something like that.
Also, after the new key fails to start, I get the message "badkey".
How do I program if I only have one key
08 10 charger works too
Sweet! I need to try that on my 08 300! Thanks
Good Afternoon, do you know how to program controller to unlock doors? just purchased a Journey 2010, which i think is the same, please advise! thank you in advance!
the green part on the key got water damaged and it won't work I don't want to buy a new one plz help 😭
Clean the corrosion off of the green circuit board using rubbing alcohol and Q-tips. Make sure to clean the whole thing, where the battery goes, between the traces, etc. You can take something pointy to scrape a little between the close traces to make sure current isn’t jumping across. Then throw a new battery in and see if you can get it to work enough to work. If you can get it working enough, and have another key, you can program a new one. But you NEED two keys. Otherwise, a dealer or locksmith are the only options.
In my car start but the door buttom no work, whats the problem?
Enterprises Global; I’m just a shade tree mechanic, not en expert. So anything I say would be a guess. Sorry I couldn’t help.
What if you only have one key? We never got a second from the dealership
Nope, one key will not work. However, Chrysler had a TSB out where they replaced the whole ignition module. They gave 2 new keys with it. Might be worth checking into to see if your van had it done or not.
Do you need 2 working keys to be bale to program 1 or 2 new keys?
Yes, you need two keys. This is how they break, and how to fix them enough to use to program new keys.
I have a 2014 Town and Country and I have lost one fob so I bought 2 new fobs online. I tried the steps you suggested in the video but it would not start the engine. Is there a way to make this work for my 2014 model or do I have to go to the dealer? Thanks.
If you do not have 2 working keys, you can’t make spares. I had one working and one broken, fixed the broken one enough to work. With a single key, you’re stuck with a locksmith or dealer. However, you may be lucky enough to fall within the recall. Check with your dealer.
thanks a lot
can any dealership program any model make vehicle key fob
I have a dodge journey key fob that doesn't work with the buttons how do I fix and I tried replacing the battery but didn't work so is it possible to buy another one and then reprogram it
What happen if the light is not coming out? Thanks
Will this not work if you only have 1 key?
Nope, you need two keys. It also won’t work if your copy is a duplicate of the same key. You need 2 unique keys.
@@Just_Mark Okay thanks
I don't understand why you would need more than two keys. It's kinda stupid that you need two keys to program additional keys. Question: can you re-program used keys from craigslist?
It’s actually kinda smart on their part. When you buy the van new, they give you two keys. Each key is programmed differently. Only the owner would have access to both of those keys, so only the owner can program more if they need extras for more drivers, etc. It’s not meant to fix broken keys. They want you to go to a dealer for that. The process in the video is kinda a way to get around that by fixing a broken key enough to use for programing more. If you only have one key you’re stuck with going to the dealer (or maybe a locksmith can do it). There’s also a limit to how many keys you can do this way before requiring a dealer reflash.
And: I don’t know if used keys can be programmed like this. I haven’t tried that. If you find out, let us know.
@@Just_Mark, I love to try but don't want to screw up the van computer.... too scared to try.
It’s so a valet or someone that gets a hold of your key can’t make a copy
muy buenoooo yesssssssss!!!!
If we had two keys we wouldn’t be trying to get more it’s not even right for it to be like that either
Спасибо!
Here’s the keys I used: amzn.to/3o9YsVX
I have no idea why, but I can not get this to work on my 2010 grand caravan, the only ding sound i get is from my oil change message and no flashing light. Does anyone know a way I can do this?
Nesecito qué me ayudes nesecito saber dónde comprar un viper de Gran Caravan del 2011
I have Dodge Jorney 2010 key fob and it stopped working and after using spare key to open car it doesn't let me start the car with the key fob that goes in the ignition. Can anyone tell me why and help me?
Thaaaank youuuuuu
If you need to make a duplicate key for a spare key and you already have a duplicate spare key why do you need to make a difficult spare key
How many contacts are their on 2010challenger se remote
Hello. I have 1 working key i bought 2 new but it doesn't work for me what do i have to do if i have 1 working key ? anyone please help me out with it.,. thanks guys
So, you can't program these keys unless you have two working keys? I only have one key for my van, the only option I have is to pay the $300 for a new Keyfob?
DarakuTenshi You’ll need two in order to program yourself. I fixed my broken key enough to work giving me a second, then used that to program new ones off Amazon. Otherwise, you’ll be forced to go through a locksmith or the dealership.
My problem isn't the same as yours (thank God). Mine is just none of the buttons work anymore, so I ordered a fob hoping to use the rubber sheath with the metal contacts for the switch. Eventually I'm sure I'll end up with problems like you ran into... luckly I'm no stranger to a soldering iron.
It would just be nice to have 2 keys for the van. I just made a copy of the external entry key so if we lock the keys in the car again we can at least get into the vehicle.
i just bought a 2009 used van, but the guy only had 1 key, what are my options now to get another key??
Take it to the dealer to check if the van has had the ignition module recall. If it hasn’t, get it done and you’ll end up with two brand new keys. If it has, you’re stuck buying another key at the dealer.
Just livin’ with Mark I bought it from a “private” dealer... I guess he has “dealer status” but sells car from his house,... are you suggesting I take it to a bog time dealer to find out if it had that recall done?... and then if not, I pay for that recall and I’ll get 2 keys provided with that recall?
Prairie Climber If it needs the recall, the Dodge dealer has to do it free. The new keys are part of the ignition switch recall. It doesn’t matter where you bought the vehicle. If it’s a dodge and needs the recall, the dodge dealer has to fix it.
Just livin’ with Mark awesome!... thanks for the info... it’s COVID-19 easter weekend, i’ll try tomorrow (sat, dealer still open)... if not, stay safe!, thanks!
did not work for my town &country with new 2 amazon keys
Not sure what to say. It has worked for many others. My van had the recall done, so it’s got a new ignition switch and two new factory keys now. Maybe your T&C still needs the recall. Check with a Chrysler dealer. That recall came out a few years back. Cars were shutting off while driving because the keys would fall out.
What if you only have one key? Is there a way to program a new one? Thanks in advance!
Not by yourself.
Just livin’ with Mark bummer. Thanks for the prompt response.
What if when you bought the car and only got one key
You’re stuck with the dealer.
Do you know if this will work on a 2017 Dodge Caravan?
Steve Hollifield Will not work on any Chrysler after 2010.
@@guyonearth Is it possible to program a 2017 yourself with two already programmed keys? I can't find a tutorial.
@@jeffh5420 You can't program anything yourself after 2010. Requires a security token from the manufacturer.
2010 Volkswagen Routan would work on this one or not?
Digging with RodCo yes
The VW Routan is a rebadged Chrysler Minivan
What I can do if a have only one working key ???
You have to take it to a dealer, or maybe a locksmith.
How would one program ankther key if i only have one working key?
My question already got answered In some other commrnt but great video! Great audio and everything
@@juanarizpe8197 cómo lo solucionaste?
What is the link for the keys
northcoastkeyless.com/product/2008-2016-dodge-grand-caravan-7-button-key-fob-remote-fcc-id-iyz-c01c/?gclid=EAIaIQobChMIla6Ggbzo6AIV1AiICR2BfAatEAQYASABEgKx9_D_BwE
Insert old working key. Turn acc on. Wait.
Insert 2nd working key. Turn acc on. Wait till flashing light at bottom.
Insert new key, turn to acc. Wait to hear chime ..
Programmed
This method does not work on my 2009. It never enters programming mode.
guyonearth mine too
it does not work in my 2010 neither
Worked on my 08 Dodge Grand Caravan
Does anyone know Will this work with 2019 dodge grand caravan
No. It may work on other older Chryslers/Dodges, but 2019 is far too new.
@@Just_Mark thanks
No go for me.
No go
You have two keys 😑
I have two keys, but neither of them unlock the doors. Could I still do this with new fobs?
Do they start the car? It doesn’t sound like this will work, unfortunately.
Just livin’ with Mark yeah they start the car, just won’t unlock the doors.
If both keys are having the same problem, than it seems like the issue would be the lowest common denominator... something to do with the car itself. I would start diagnosing the issue by changing both batteries so you know the keys are fresh. It could just be that. Otherwise, I would focus on the car itself. Figure out how the car receives the signal from the key. Etc.
What size is the battery
The same problem, my key fog just start my dodge 2008 caravan, but the work on the door
por favor en español
VOLUME TOO LOW
I’ll say the same thing as the last guy. Bullshit. I did exactly what you said which is exactly what he said on a 2010 Town & Country and it did not work. Stop putting false information out there for people like me trying to save money for my elderly parents.
I’m not sure why this didn’t work for you, as it has for many others. Calling it bullshit is your opinion tho and I can understand that opinion. If I couldn’t get a simple fix to work that I had seen on RUclips, I would think the same thing. However with the mostly-positive response to this video, I would think that there is something about your particular vehicle/situation that is prohibiting this fix from working.
Some time after making this video we received a recall notice in the mail over the ignition switch on our van. They replaced all of it for free under this recall and gave us two brand new Chrysler keys. I would suggest checking online to see if your vehicle was one affected by this recall.
2010 Volkswagen Routan would work on this one or not?
Seriously? Cmon.