I ordered this last week. 1. I can't believe how fast it got delivered! When i ordered I was originally told between the 16th and 28th. Got it the 10th! 2. The quality on the 3d printed bits and bobs were excellent! 3. Everything was extremely easy to drop in. I did have to fiddle with the front orange bit a few times to get the new barrel to reliably sit in every time, now it's flawless. Man, thank you for this kit! Ps, absolutely works with 3d printed cylinders from XFoxGames!
Few weeks ago I just happened to pass a target and thought to myself "yeah, i got time... if they have an outlaw or a ZLS, I'll buy it" Been working on this kit ever since
From reading the etsy page, it sounds like with this kit, I'd be able to get higher than stock performance out of my Outlaw, with the much lighter low power spring. Count me interested in a second run as well!
I'm actually on like a 6th run by now! It's impossible to keep stocked. I think I have supplies for just 2 more kits, but more supplies are on their way.
So the most popular LARP that uses blasters here in America, called dystopia rising, has a 120-130 fps cap. Is there any additional way to slightly slow down the downgraded blaster, like another half inch of barrel say, a brass insert for the faux barrel muzzle?
You'd be better off ordering a downgrade spring from Dart Zone directly. That hits about 90 by itself, and then with the upgrade can be tuned up again. This makes the prime easier, but you don't lose any performance over a stock outlaw, which does hit about 120 normally.
It has the longest barrel. Any more and your average performance drops. Technically you could get more high outliers with a longer barrel, but it'll be very inconsistent and unreliable.
I ordered this last week.
1. I can't believe how fast it got delivered! When i ordered I was originally told between the 16th and 28th. Got it the 10th!
2. The quality on the 3d printed bits and bobs were excellent!
3. Everything was extremely easy to drop in. I did have to fiddle with the front orange bit a few times to get the new barrel to reliably sit in every time, now it's flawless.
Man, thank you for this kit!
Ps, absolutely works with 3d printed cylinders from XFoxGames!
I almost stopped into Target on my way home from work to grab an Outlaw today.......I'm gonna go ahead and do that, knowing this kit is available...
Few weeks ago I just happened to pass a target and thought to myself "yeah, i got time... if they have an outlaw or a ZLS, I'll buy it" Been working on this kit ever since
@@radioactivesdesigns3554 Got my Outlaw, ordered the kit (I'm with Coffin Black Media on Etsy)!
thanks for making this video
From reading the etsy page, it sounds like with this kit, I'd be able to get higher than stock performance out of my Outlaw, with the much lighter low power spring. Count me interested in a second run as well!
I'm actually on like a 6th run by now! It's impossible to keep stocked. I think I have supplies for just 2 more kits, but more supplies are on their way.
Nice kit! Gonna have to pick this up soon.
This is a great kit. I'll have to pick one up to mod my outlaw. Thanks!
Flare was the word😜
So the most popular LARP that uses blasters here in America, called dystopia rising, has a 120-130 fps cap. Is there any additional way to slightly slow down the downgraded blaster, like another half inch of barrel say, a brass insert for the faux barrel muzzle?
You'd be better off ordering a downgrade spring from Dart Zone directly. That hits about 90 by itself, and then with the upgrade can be tuned up again. This makes the prime easier, but you don't lose any performance over a stock outlaw, which does hit about 120 normally.
I’d love to know what the longest barrel length you could put in one is
It has the longest barrel. Any more and your average performance drops. Technically you could get more high outliers with a longer barrel, but it'll be very inconsistent and unreliable.
Do you know the inner diameter of the barrel? 5/8th or17/32nds? Trying to add the PCAR barrel to it
The inner diameter? That's .504"
Is there a Stock Replacement Spring for the Outlaw?
Like a downgrade spring? Dart Zone sells those in a 2 pack.
Really interested to see if this works with 3d printed cylinders
I've gotten a review that says it works well with them.
Are you going to do another batch of this kit?
I am. I have all the parts now, just gotta put them together
Sweet
Do you know ow when you will have more.
I just sold out, but I did just get more materials in this afternoon. I need to go and update the listing.