Use a JIS screwdriver to unscrew your screws and avoid striping one or more. JIS (Japanese Industrial Standard), all of the screws that people think are Phillips screws are JIS screws. JIS screws don’t strip like a Phillips does when using a JIS screwdriver.
Just put the same intake on my ruck and wow its soo much louder now , i also have a yoshimura pipe coming soon and already im kinda questioning the noise level lol
oh shit I literally just installed the same seat frame and similar cover from cheeky seats. that carb screw is a big oof. may do what you did and swap mine out too.
If you have any bogging or hesitation issues...shoot me a comment back. I can give you some tricks to get it dialed in perfectly. I had some problems with that intake set up. Jetting may not be correct also since you don’t have an exhaust yet. All that depends on where you live and sea level in your area.
thanks man, no bogging issues luckily, but I definitely need to tune the jets, I can feel it isn't quite right! I'll be posting a test ride video next weekend 👍
IMO YES get an new air intake. The exhaust is worthless with out extra air coming in. In fact you might even losing performance do the the lack of back pressure because of the exhaust.
Awesome video. One question, please. I've heard you should do the intake only at the same time you do a new exhaust. Is this true or can I run the stock muffler with these modifications (jetting carb and intake install)?
Yes you can install the TVR intake without an exhaust . I just received mine yesterday and installed . TRS suggested I use the 38 main and shim the needle . I did so and performance wasn’t quite up to my pre install . So I installed the 78 and I’ve slightly increased my top speed and low end is substantially better . By slightly adjusting the stack in and out , 1/8 in. or less you will find the sweet spot . This intake is loud and sounds like you’ve added an exhaust . And if you’re planning on keeping the rear fender you will need to purchase or fabricate a support . I have not found any info on removing the PCV valve so it’s still hooked up , would I recommend installing the TVR intake ? Yes Definitely .
![TVR AIR INTAKE INSTALL (+Jetting The Carb) - Ruckus Build [EP. 3]](http://i.ytimg.com/vi/4YlzyPjrAmE/mqdefault.jpg)
![TVR AIR INTAKE INSTALL (+Jetting The Carb) - Ruckus Build [EP. 3]](/img/tr.png)
Instantly subbed cuz you own a ruckus ✌️
🇩🇴🇩🇴🇩🇴Hello from the Dominican Repúblic nice to see you
subcrd total for youuuuu, hope to be the first to watch your video is a pride for me, very good, hopefully always healthy
Use a JIS screwdriver to unscrew your screws and avoid striping one or more. JIS (Japanese Industrial Standard), all of the screws that people think are Phillips screws are JIS screws. JIS screws don’t strip like a Phillips does when using a JIS screwdriver.
Just put the same intake on my ruck and wow its soo much louder now , i also have a yoshimura pipe coming soon and already im kinda questioning the noise level lol
the double finger guns you always do at the start is so "dude making a vlog"
really awesome ! love u wes!
well done homie looks great
oh shit I literally just installed the same seat frame and similar cover from cheeky seats. that carb screw is a big oof. may do what you did and swap mine out too.
I HIGHLY recommend it! will save you in the future for sure.
If you have any bogging or hesitation issues...shoot me a comment back. I can give you some tricks to get it dialed in perfectly. I had some problems with that intake set up. Jetting may not be correct also since you don’t have an exhaust yet. All that depends on where you live and sea level in your area.
thanks man, no bogging issues luckily, but I definitely need to tune the jets, I can feel it isn't quite right! I'll be posting a test ride video next weekend 👍
Thanks for the sub back appreciate it. If need be comment back and you can hit me up on facebook
I might need some advice lol 😂
If I swap out the exhaust do I need to swap out the air intake to aftermarket as well? I just bought a new Ruckus so I'm new to all this?
IMO YES get an new air intake. The exhaust is worthless with out extra air coming in. In fact you might even losing performance do the the lack of back pressure because of the exhaust.
What’s the name of the song you had playing
great job!
It is my understanding (per you) to only install the 85 main jet if you keep stock exhaust?
@@danielwalsh9661 yes thats if you have a different airbox kit not the tvr.
The Ruck Shop Thank you as I’m looking to install this kit and keep the stock exhaust for the time being . I’ll re jet and add the shim .
Do you have to do anything with the open end on the vacuum fuel pump or do you just leave it?
You could have used vice grips to turn that screw.
what did that tiny washer have to do with putting it on the needle? if it did t have one in the first place?
Can you please tell me there’s one hole that goes to left side
I love these videos where they do these modifications, then never even start the motor when your done. Did your mod fail?
I have got same one notice mid run rough can you help me
I install carburetor filter every jet carburetor it was Bogged out
Does that velocity stack have a filter in it ?
No filter. I just installed this kit.
Awesome video. One question, please. I've heard you should do the intake only at the same time you do a new exhaust. Is this true or can I run the stock muffler with these modifications (jetting carb and intake install)?
Better to do both so you only have to jet once
Yes you can install the TVR intake without an exhaust . I just received mine yesterday and installed . TRS suggested I use the 38 main and shim the needle . I did so and performance wasn’t quite up to my pre install . So I installed the 78 and I’ve slightly increased my top speed and low end is substantially better . By slightly adjusting the stack in and out , 1/8 in. or less you will find the sweet spot . This intake is loud and sounds like you’ve added an exhaust . And if you’re planning on keeping the rear fender you will need to purchase or fabricate a support . I have not found any info on removing the PCV valve so it’s still hooked up , would I recommend installing the TVR intake ? Yes Definitely .
What did you do with the stock holes
Does breather come with it
What size jets