If I do not have a transfer function how do I do it , in case of a Nonlinear system suppose I want my motor to rotate at pi.pi,2,pi/4,pi/6 and keeps on repeating the angles how do I do it
@@sachinsharmajcbro Thank you for reply sir, and can I ask you for any advise of how to determine the factors of transfer function respresents any motors?
@@sachinsharmajcbro sir suppose i have 24 v and i want to make 200v 400v...for that reason will i have to design pi controllet 2 times or 1 tunning will do work??
hello sir, can you help me? i have try like your video, but i have an error: "A valid state attribute should be either a character vector, a cell array or a valid MATLAB structure". What does the mean?
@@sachinsharmajcbrono I mean it . Try searching on RUclips anything regarding matlab or engineering in general . 80% are indians giving tutorial . No problem at all, just sad that the field is not more ethnically diverse :/. Europeans would rather study useless shit like gender studies, social studies and things as such ...
Sir kya aap mere liye Electric Kiln Controller using pid ka video bana sakte ho ? Ya aap mere liye project bana sakte ho apka contact ya kuch ho to mil sakta hai ?
sir, i am doing my m.tech project speed control to induction motor with pid controller only, with your video it is clear how to make the PID controller but I am confuse how to use it with the induction motor . can you help me sir how to make the transfer function of induction motor with the values.
How can i get the position control of BLDC motor & how can i design a PID controller for BLDC motor?It will be a great honor if you tell me the fact.Thanks.
Great video. Currently designing a pendulum system with a flap actuator that changes angles depending on the incoming airflow An ultrasonic sensor measures the distance from a given reflective surface. However i need to create a p controller then pi followed by a pid. i am not allowed to use the PID controller block in simulink. any help would be greatly appreciated
Hii...please do a video on a drum or disc rotating with some rpm and it is automatically stopped for 20 sec and again starts running for another 50 sec. This process continues.
In general, what's involved in using custom smarts (FPGA, Arduino, etc), with custom hardware.. (Stepper Motor / Brushed DC Servo with position feedback encoder or Sensorless Brushless (BLDC) with analog BackEMF feedback for commutation or AC/Induction Motor) Running Simulink HIL in order to characterize the motor/mass and optimize the PID control loop?
How to make this statement in simulink : Varying the current from 1 to 25A, in steps of 0.4 ampere, every 40 s over a total simulation period of 2720 s. Sir I have to give output of this as input to a model containing continuous states . Can you please tell me how to achieve this in simulink. Please help.
Dear I don't know what do you mean by this. But if you are referring to the symbol then you need to improve your knowledge about other parts of the world. This symbol is Indian symbol swastika which represents prosperity and well being for all. Please do some google search and educate yourself.
Download Simulink Model Here: www.jcbrolabs.org/simulink-models
Makasih pak
Great
Despite the accent, your explanation was AMAZING, thank you sir :)
great
İs there any differences from analog pıd controller?
thank you
You're welcome
SEN KALİTELİ BİR BİREYSİN!
I didn't understood....
Thanks a lot!
If I do not have a transfer function how do I do it , in case of a Nonlinear system
suppose I want my motor to rotate at pi.pi,2,pi/4,pi/6 and keeps on repeating the angles how do I do it
You have to change your reference signals. Maybe you can define a periodic function that follows your order.
sir i want to use control for multilevel inverter ..can you please help me
you can send us an email at: info@jcbrolabs.org
Sir,To make only PD controller can i make ki=0?Will that work?
Yes, It will work
thanks
You're welcome!
What's the transfer function here for sir?
We choose some random transfer function
@@sachinsharmajcbro Thank you very much for your reply, my question was wether the transfer function to represent the motor on the simulink model.
@@bigcatdairy You can use the transfer function representing the motor.
@@sachinsharmajcbro Thank you for reply sir, and can I ask you for any advise of how to determine the factors of transfer function respresents any motors?
thanks sir!
Most welcome!
Sir is this digital pid used in this?
No, I used continus time PID implementation is 's' domain.
sir in matlab 2015a there is no pid in simulink library browser
Yes, there is..
How can i add filter to simulik
thank a lot sir
How can I design a PID based fault tolerant control - gain scheduling design?
Hi, Please send your query at: info@jcbrolabs.org
@@sachinsharmajcbro Where can I find the query?
@@Marcus-xj6zq send us a mail at: info@jcbrolabs.org
thank you very much
sir can u help me in designing controller for vehicle model in simulink ..wil pay
If load is variable then what will i do?
I didn't get your query...
@@sachinsharmajcbro sir suppose i have 24 v and i want to make 200v 400v...for that reason will i have to design pi controllet 2 times or 1 tunning will do work??
hello sir, can you help me? i have try like your video, but i have an error: "A valid state attribute should be either a character vector, a cell array or a valid MATLAB structure". What does the mean?
I am not sure about this error. Please send your query at: info@jcbrolabs.org
I think no one outside of India has ever touched Matlab...
Hahahaha.....good sarcasm by the way is there any problem with our design?
@@sachinsharmajcbrono I mean it . Try searching on RUclips anything regarding matlab or engineering in general . 80% are indians giving tutorial . No problem at all, just sad that the field is not more ethnically diverse :/. Europeans would rather study useless shit like gender studies, social studies and things as such ...
Thank for your fruitful video, Sir can I use this to control output voltage of multilevel inverter. Can you help me sir?
Yes we can
Sir kya aap mere liye Electric Kiln Controller using pid ka video bana sakte ho ? Ya aap mere liye project bana sakte ho apka contact ya kuch ho to mil sakta hai ?
you can contact us at: info@jcbrolabs.org
How do I Tune the PID controller to find the right kp ki and kd values for my system?
Hi, you can contact us at: jcbrolabs@gmail.com
@Raphaël Koskas Hi, actually I answer those questions which are general in nature.
Hello sir, please I want to implement the FOPID in the SMIB(single machine infinite bus) can you help me?
hi did y find anything ? im also woking on FOPID controllers
❤❤❤❤❤
sir how have u calculated gain ki kp and kd and how to put value of Ti (time constant)
By tuning of PID controller...
thanks bro.
hola Ki y Kd son lo mismo que Ti y Td??
es que yo solamente tengo los valores de Kp, Ti y Td
I used google translater, so as far as i understood your question, Ti and Td are different than Ki and Kd.
sir, i am doing my m.tech project speed control to induction motor with pid controller only, with your video it is clear how to make the PID controller but I am confuse how to use it with the induction motor . can you help me sir how to make the transfer function of induction motor with the values.
You can contact us at jcbrolabs@gmail.com
Regards
Sir i want to implement this technique in reactive power compensation using static var compensaor.. can you help me ?
you can contact at jcbrolabs@gmail.com
can you implemente any algorithm for Position control of dc servo motor of PID Controller????
yes, that can be done.
Sir, why the swastika?
How to show the rise time, overshoot, and undershoot
Its not really relevant in power electronics based drive with saturations ruclips.net/video/2-vnIwhLilA/видео.html
how can i use this PID controller for my INduction motor? any help will be appreciated.
Hi,
just use induction motor transfer function for that purpose. If you find problems with that then you can contact us at jcbrolabs@gmail.com
Sir pls help...I am not able to make simulation ...can u help on email..pls sir
You can send us an email at: info@jcbrolabs.org
@@sachinsharmajcbro thanks sir
@@sachinsharmajcbro sir I have email the detailed..have u checked it
How can i get the position control of BLDC motor & how can i design a PID controller for BLDC motor?It will be a great honor if you tell me the fact.Thanks.
what is set point in this video
sir how to write pid controller in matlab functions block
Hi can I get your help in something please? I have to do a mimo fuzzy regulator with 4 inputs and 2 outputs in matlab and I have no idea how..
Yes, you can send your query at jcbrolabs@gmail.com
How to design a simulink model so that ur kp,ki,kd values changes depending on input graph
Hi,
you can contact at jcbrolabs@gmail.com, with greater detail.
Regards
sachin sharma I'm so glad , I will do it.
Dude do you have a swastika in your logo? (00:00)
Dear yes we have swastika but it is an Indian symbol swastika. It represents prosperity and well being for all. Please search about it on google.
how to design FOPID controller...?
use FOMCOM tool box..
how to design pi controller
Great video.
Currently designing a pendulum system with a flap actuator that changes angles depending on the incoming airflow An ultrasonic sensor measures the distance from a given reflective surface. However i need to create a p controller then pi followed by a pid. i am not allowed to use the PID controller block in simulink. any help would be greatly appreciated
Hi, You can contact us at info@jcbroolabs.org for organised support in project work.
Hii...please do a video on a drum or disc rotating with some rpm and it is automatically stopped for 20 sec and again starts running for another 50 sec. This process continues.
In general, what's involved in using custom smarts (FPGA, Arduino, etc), with custom hardware..
(Stepper Motor / Brushed DC Servo with position feedback encoder or
Sensorless Brushless (BLDC) with analog BackEMF feedback for commutation or
AC/Induction Motor)
Running Simulink HIL in order to characterize the motor/mass and optimize the PID control loop?
How to make this statement in simulink :
Varying the current from 1 to 25A, in steps of 0.4 ampere, every 40 s over a total simulation period of 2720 s. Sir I have to give output of this as input to a model containing continuous states . Can you please tell me how to achieve this in simulink. Please help.
I wonder how to decoupling the model if we have two ouputs, and two inputs. Can you explain it to me??
WHY IS THERE A SWASTIGA IN THE BOTTOM RIGHT CORNER???
Because, It is a swastika from India, representing well being for all..
These are terrible.
wtf is that logo bro LOL
Dear it is not WTF...It is simple Swastika symbol from India. Please learn more about it on google..
Canal de apologia a favor del nazismo
Dear, I can only say that you need to educate yourself further. Please search about swastika symbol in India.
Nazi?
Don't worry, it is not a Nazi symbol. It belongs to Indian symbol Swastika. Please search about the same in internet.
Out nazi
Dear, I can only say that you need to educate yourself further. Please search about swastika symbol in India.
Так вот они где. Украинские нацисты.
Dear I don't know what do you mean by this. But if you are referring to the symbol then you need to improve your knowledge about other parts of the world. This symbol is Indian symbol swastika which represents prosperity and well being for all. Please do some google search and educate yourself.