Hey I did everything you mentioned but my turn signal adapters came with 2 wires white/Blk. And blue/black connected everything but nothing turned on at all I connected those black wires to the black one coming from drc harness
Trent Paden no. The drc tail light that comes in the assembly is just the running light and brake light. You have to buy the twelve o’clock labs processor board for integrated signals or buy the signals separately.
TexasRider90 *Beefy* you can buy the whole setup from 12 o’clock labs web site. I bought my edge 2 from local dealer and the processor board from 12 o’clock labs web site. Srmoto also sells this I believe. Glad to help bro. Sub for more vids. Cheers.
GrandmaJosey my licence plate light still works. Not sure what you did. My video is exactly how I installed the light. Maybe you have a bad ground or a wire hitting the frame. I would inspect the wires to make sure none are broken or grounding out. Then I would make sure the wires are hooked up properly. Hope that helps
Gizake I haven’t watched my vid in a while but I woulda commented in the video if you needed to cut the wires. But as far as I can remember no wire cutting. It was all plug and play. 12 o’clock labs sends you everything you need. It’s super easy.
put mine on today. Had trouble with the lighting connections but then your video provided the info I needed - thx!!
Glad it helped!
So much better than the stock one! Thanks for the video!
Glad it was helpful. Cheers!
Thanks for the assistance ... great vid !!
Bin Stuntin glad to help. This was one of my first vids I made. I have about 28 now total on my wr250r. Lots of mods. Cheers
Hey I did everything you mentioned but my turn signal adapters came with 2 wires white/Blk. And blue/black connected everything but nothing turned on at all I connected those black wires to the black one coming from drc harness
Helped me out. Thanks!
Glad it was helpful! Cheers
are the blinkers in another colour like orange ? looks red on the video
No they are only red dude. But I like how you can program them to have different signals. Pretty cool
Does the regular Drc taillight without the 12oclocklabs swap have the turnsignals?
Trent Paden no. The drc tail light that comes in the assembly is just the running light and brake light. You have to buy the twelve o’clock labs processor board for integrated signals or buy the signals separately.
Okay thanks for the info!!
Trent Paden anytime dude. Cheers!
This is so helpful. What website did you get this from?
TexasRider90 *Beefy* you can buy the whole setup from 12 o’clock labs web site. I bought my edge 2 from local dealer and the processor board from 12 o’clock labs web site. Srmoto also sells this I believe. Glad to help bro. Sub for more vids. Cheers.
TexasRider90 *Beefy* also the wires should be the same I would think. They are the same bike just with supermoto wheels
Did your state license plate fit the holes? Mine is about 1/2" too big on either side. Did you get a license plate holder?
Jdl 77 nope mine fit no problem. I am from British Columbia.
Jdl 77 could you drill holes in the plate so it fits? My motorcycle plate is a smaller plate then a normal vehicle plate here in bc.
What did you do with the license plate light connector (yellow) having a problem now where my fuse keeps blowing since the install
GrandmaJosey my licence plate light still works. Not sure what you did. My video is exactly how I installed the light. Maybe you have a bad ground or a wire hitting the frame. I would inspect the wires to make sure none are broken or grounding out. Then I would make sure the wires are hooked up properly. Hope that helps
If i was behind you I would not know which direction your going.
do i have to disconnect battery?
Gizake yes it’s always a good idea to disconnect the neg terminal when doing any electrical work on your bike.
Gizake I haven’t watched my vid in a while but I woulda commented in the video if you needed to cut the wires. But as far as I can remember no wire cutting. It was all plug and play. 12 o’clock labs sends you everything you need. It’s super easy.