Saris Bones EX Installation

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 63

  • @Fordham81
    @Fordham81 Год назад +3

    Followed instructions for my Mazda CX30. Upper strap that went to left top of my hatch pulled forward during trip(2 hours- 2 bikes) and bent edge of the hatch inward. Not happy.

  • @eliara-thevoice8430
    @eliara-thevoice8430 2 года назад +1

    Great summary. Over the years, I have had to change racks to fit different vehicles. Hatchbacks w slanted windows require more space to keep the bikes from making contact with the back of the car.

  • @johnhenderson5845
    @johnhenderson5845 Год назад +1

    I have a Honda CRV and the booklet guide seems to contradict this video? The book shows the lower feet being placed on the horizontal section of the bumper but the video is showing the feet placed against the vertical trunk surface?

  • @scorpionoir4952
    @scorpionoir4952 8 дней назад

    Hello. I went to the website to enter the information on my car (2012 Honda Crosstour EXL) and I received a message saying "Sorry! Looks like this vehicle is not compatible..." My car is a hatchback and the rear window is long and sloping. I love bike racks that you all offer. Is there anyway that I can make this rack work for my vehicle if I extend the top straps past the back window and hook it inside the 2 rear doors. The top edge of the window is glass and not metal so I would have to hook the top straps somewhere else.

  • @secordman
    @secordman 3 года назад +3

    Do the two upper arms stay clear of the rear wiper? In case it accidentally gets turned on? I have the Bones 2 which only has a single upper arm that was ok for my sedan. No good for my SUV so maybe the two arms here go higher?

    • @SarisOfficial
      @SarisOfficial  3 года назад

      Feel free to reach out to us at support@saris.com so we can take a look at your specific setup and help you out with this.

  • @shearichardson4447
    @shearichardson4447 Год назад

    I have a 2016 Kia Sedona Mini Van. Will the Saris Bones EX trunk rack work for my van?

  • @leaper1983
    @leaper1983 Год назад

    i have an ATOPONE A9 mountain style bike folding bike....I don't know the official weight in pounds....but I know it is probable heavier than the 35 lb limit on one bike....what if That is the only bike i am attaching to the bones EX 2 bike rack....and i place it closest to the vehicle. Will it still be ok to use?

  • @docsavage8640
    @docsavage8640 3 года назад +19

    Skipping steps pretty much makes this video useless. You jump forward without explanations and suddenly straps are on the trunk lid without any instructions. Your manual that comes with the rack is utterly opaque with the drawings open to multiple interpretations.

    • @ariespope
      @ariespope 2 месяца назад

      How does one get the straps on?

  • @cristinac9604
    @cristinac9604 3 года назад +2

    Looking to purchase this for a Honda CRV. Will it for? Also what security features does it have? Can I leave it installed parked on the street without worry?

    • @SarisOfficial
      @SarisOfficial  3 года назад

      Thank you for reaching out. You can find that fit information on our fit guide at www.saris.com/support/findmyfit. The rack does not come with these, but you can purchase the trunk rack lock to lock the rack to the trunk at www.saris.com/product/trunk-rack-lock to go with it, and/or a locking cable to secure the bikes to the rack at www.saris.com/product/locking-cable as well. Feel free to reach out to our customer service team at support@saris.com if we can be of more help!

    • @brianchun1908
      @brianchun1908 3 года назад +1

      Did you purchase it? And if you did were you able to leave it on without worry?

  • @eliara-thevoice8430
    @eliara-thevoice8430 2 года назад

    The Saris wesite says the Bones rack fits a Nissan Rogue. Does it fit a Rogue? Below you contradict this.

  • @agustinaperezdesalvo2024
    @agustinaperezdesalvo2024 Год назад

    Hi, this rack would fit my Suzuki Maruti alto 800 GA 2014? Thank you!

  • @calvincalix1295
    @calvincalix1295 Год назад

    Mine came with end caps for the sides of the shaft. When do I install those? There’s no instruction in the manual

  • @marekbalaz3504
    @marekbalaz3504 Год назад +1

    Hi, Would this one fit to volvo xc60 ?

  • @NetMillionaire
    @NetMillionaire 4 года назад +2

    I need to get an e-bike carrier for rear BMW Z4 (no towbar) but not sure if any will fit? Any recommendations welcome.

    • @cwilsong1
      @cwilsong1 4 года назад

      Simon Stepsys I use it on my 230xi and it works great so I bet you will be fine.

  • @retsmd
    @retsmd 2 года назад +1

    I have a Bones EX 3-bike. I understand that the maximum weight capacity for this is 105 lbs at 35 lbs per bike. I was wondering if I can use a single bike weighing 70lbs on it without any problem.

    • @SarisOfficial
      @SarisOfficial  2 года назад +2

      The maximum weight limit possible per bike is 35lbs , even for a single bike

    • @retsmd
      @retsmd 2 года назад

      @@SarisOfficial, thanks for clarifying. Much appreciated.

    • @Addy92000
      @Addy92000 2 года назад +1

      YOLO!

  • @bhawley1000
    @bhawley1000 4 года назад +1

    I will be installing this rack on the rear hatch door of a VW Vanagon. Question - having the upper feet resting against the rear window glass is ok? I will locate the feet about 4” down from the top of the glass. I’m sure the glass is tempered - good strength by code. Thank you - Brent

    • @SarisOfficial
      @SarisOfficial  4 года назад

      Unfortunately, the Bones EX is not considered a fit for any model of the VW Vanagon. Feel free to check you vehicle's fit for other racks at www.saris.com/support/findmyfit

  • @ikbev
    @ikbev Год назад

    will this fit a 2018 range rover sport?

  • @abayperez8136
    @abayperez8136 Год назад

    is it still safe even though i drive like a gorilla on caffeine? how stiff the rack is?

  • @Leah-xq2ko
    @Leah-xq2ko 8 месяцев назад +1

    Very clear and great instructions

  • @bmcintyre51
    @bmcintyre51 11 месяцев назад

    I’m very wary of having support feet directly touching the rear glass on my 2019 Forester.

    • @SarisOfficial
      @SarisOfficial  10 месяцев назад

      Hi! The feet are a soft rubber and as long as you keep them clean, it shouldn't be an issue!

  • @juankaramirez
    @juankaramirez 4 года назад

    Hi, what rack would fit my Honda Odyssey 2006? It does not have a hitch. Thanks

    • @SarisOfficial
      @SarisOfficial  4 года назад

      Hi Juan: Unfortunately we do not have any trunk racks that fit your vehicle.

  • @mj9949
    @mj9949 3 года назад +2

    Great video. How about loading a woman’s bike ?

  • @ATrain-br3uj
    @ATrain-br3uj 4 года назад

    I have a 2016 honda fit. Why should it not be in the bumper?

    • @SarisOfficial
      @SarisOfficial  4 года назад

      Due to the soft spoiler at the top of the hatch of the Honda Fit, you will want to install the rack so that the lower feet sit in the license plate well. This will allow the upper legs to reach up under the spoiler and ensure proper support for the straps so that they do not pull on the spoiler. This will help prevent too much stress to your spoiler that could potentially cause vehicle damage if installed improperly.

    • @eliara-thevoice8430
      @eliara-thevoice8430 2 года назад

      I have used it on a Fit. You need to stay above the bumper.

  • @aidanconnolly8148
    @aidanconnolly8148 4 года назад

    Does it fit Volvo xc90? It says no fit on saris site but it looks like it should fit

    • @SarisOfficial
      @SarisOfficial  4 года назад

      Hi Aidan: That is correct. Our fit guide indicates that the Bones EX does not fit your vehicle if it is newer than 2016.

  • @PoetlaureateNFDL
    @PoetlaureateNFDL 4 месяца назад

    Thank you! 😊

  • @mikesee77
    @mikesee77 3 года назад

    Can I ask if it fits the Volvo XC60 (2012)?

    • @SarisOfficial
      @SarisOfficial  3 года назад

      Hi Mike! You can find that fit information on our fit guide at www.saris.com/support/findmyfit. If you have any additional questions, feel free to reach out to us at support@saris.com and we will be happy to assist.

  • @Jordanmilo
    @Jordanmilo 3 года назад

    What keeps the front wheel of the bicycle from flapping around loosely?

    • @corpsyman
      @corpsyman 3 года назад +1

      I don't have this particular rack, but I use ball bungees.

    • @SarisOfficial
      @SarisOfficial  3 года назад +2

      In hanging style racks the front wheels do move, so creative tying or using wheel straps can help. We do sell wheel straps if you would like to secure it down. Here is a link: www.saris.com/product/wheel-straps.

    • @secordman
      @secordman 3 года назад +4

      Bungee cords

    • @eliara-thevoice8430
      @eliara-thevoice8430 2 года назад

      Bungee cords. You have to tie the front wheel to the bike to stabilize it.

  • @johnstark5097
    @johnstark5097 4 года назад +7

    These obscure the number plate and lights. Already been warned by police. So you have to factor in the £100's to get the number plate and lights bar . Or buy the cheaper models that hold the bike higher!

  • @robertfries8645
    @robertfries8645 2 года назад

    Brilliant Design

  • @loubino18
    @loubino18 3 года назад +1

    How install straps?

    • @SarisOfficial
      @SarisOfficial  3 года назад

      Feel free to email our support team at support@saris.com and we will be happy to assist with this!

    • @ral72
      @ral72 2 года назад +1

      Just magically snap your fingers, and they'll all be attached, according to this useless video, lol!

  • @Rdominca
    @Rdominca Год назад

    Very poor documentation. In particular, the explanation of what to do with the tangle of webbing that runs through the center tube when you take it out of the box is implied in milliseconds in this video, and omitted in the pictorial manual in the box that comes with instructions that are equally inadequate in several languages (i.e., industry standard)

  • @TomWalsh1
    @TomWalsh1 2 месяца назад

    Wow the moment at 1:13 where all the straps magically attach is genuinely infuriating

    • @SarisOfficial
      @SarisOfficial  2 месяца назад

      Good eye! See 1:20 for strap attachment instructions :)

  • @auralplex
    @auralplex 2 года назад

    The straps that hold the bike in and the part they connect to on the main assembly is cheap plastic. I’ve seen countless reviews that said they broke and their bike fell off or almost fell off. I bought it because it was on sale, but I can tell you it’s cheap. Please fix the most important part - the straps!

  • @patpiet1228
    @patpiet1228 5 лет назад +1

    Video doesn't load!

  • @bzoidberg
    @bzoidberg 3 года назад +1

    Hey guys, does this bike rack fir onto the Nissan Rogue 2017? Thank you

    • @SarisOfficial
      @SarisOfficial  3 года назад

      Unfortunately, no Saris trunk racks are compatible with this vehicle.

    • @eliara-thevoice8430
      @eliara-thevoice8430 2 года назад

      @@SarisOfficial Hello. Could you explain why? I just bought one. The Rogue is not much different than a Honda CRV or a Honda Fit. Please explain. I don't want to have a malfunction.

  • @David-np4vo
    @David-np4vo 3 года назад +1

    Will this fit mk8 Golf

    • @SarisOfficial
      @SarisOfficial  3 года назад

      You can view compatibility with your specific vehicle, along with the fit notes, by visiting saris.com/support/findmyfit . You may also email us at support@saris.com

    • @David-np4vo
      @David-np4vo 3 года назад

      @@SarisOfficial its say don't fit but on the mk7 golf and mk8 not much difference