Have the brake coming and unexpectedly USPS fouled it up. Sven took care of it right away and even sent the replacement via 2 day shipping. Just want to mention that great customer service is a rarity now days and that Sven and his company excel at it.
Larger butt pad? Awesome. Muzzle Break barrel nut? Also excellent. Allows the use of all extended chokes (some extended choke tubes do not fit with the factory barrel nut)... though I wish they had an actual muzzle-brake baffles/plates for real recoil reduction. That would be a great future update. Extended Charging Handle? Fail. 1) Why isn't the handle notched on BOTH sides like the factory one, preventing issues for users who forget or have to reinsert it under stress. 2) Why isn't the tip of the shaft machined down a touch to allow it to press the butt pad button? Machine down the lower 1/2" by fractions of an inch and you solved your butt pad button problem. No extra tools nessesary... just use the charging handle. Its been a few years... any chance we'll see an updated charging handle?
Got the charger and the buttpad. They both look and feel phenomenal! My scorpion has their products all over it as well. Nothing they make has sucked for me yet.
I just installed the Charging Handle, it is a welcomed upgrade. While I definitely like Manticore's buttpad better than the factory one, it is 11.5 ounces vs the factory buttpad of 7 ounces. Curious as to why the Manticore buttpad base is steel, while the factory buttpad base is plastic? (both pads are rubber). I would rather have the weight savings of the factory base, since IWI decided the plastic base meets their durability standard. Lastly, my "squish" test suggest the factory rubber is a little softer than the Manticore one (I am unsure as to why the rubber portion of Manticore buttpads are so hard?). I am going to leave the Manticore buttpad on, but I believe weight savings should be taken into account for future versions (Note: I also have a Manticore buttpad on a Tavor X95 SBR I own, and also feel the buttpad is heavier and harder than necessary).
Notches creates a potential point of failiure as a stress riser, it was a design analysis decision for longevity of the part. If you are smart enough to run the Tavor TS12, we are assuming you are smart enough to remember how to install the parts on the gun.
Nice job Sven ! Got the butt pad / muzzle brake & charger handle. Big improvements for each & well worth the $$$ after Buying a Tavor TS 12. Do you have a measured % on recoil reduction on the muzzle brake ? I've seen others say 50 to 60 % reduction in recoil.
Sven , one other need for this Tavor TS 12 is a padded Cheek rest. I think you would sell many of those also !
They were all a piece of cake to install, and I love them much better than the original parts!
Have the brake coming and unexpectedly USPS fouled it up. Sven took care of it right away and even sent the replacement via 2 day shipping. Just want to mention that great customer service is a rarity now days and that Sven and his company excel at it.
I’d love if y’all came up with a legit shell holster for the TS12
I waited a long time for someone to come out with this. This is a MUST for this gun
That was exactly what I needed. I prefer detailed but functional vids of this style.
Just got this installed on mine...much better than the factory one from a functional standpoint, looks cool too.
Larger butt pad? Awesome.
Muzzle Break barrel nut? Also excellent.
Allows the use of all extended chokes (some extended choke tubes do not fit with the factory barrel nut)... though I wish they had an actual muzzle-brake baffles/plates for real recoil reduction. That would be a great future update.
Extended Charging Handle? Fail.
1) Why isn't the handle notched on BOTH sides like the factory one, preventing issues for users who forget or have to reinsert it under stress.
2) Why isn't the tip of the shaft machined down a touch to allow it to press the butt pad button? Machine down the lower 1/2" by fractions of an inch and you solved your butt pad button problem. No extra tools nessesary... just use the charging handle.
Its been a few years... any chance we'll see an updated charging handle?
I just purchased the Manticore curved buttpad and choke for my new TS12. Glad I found this video a few days ago while I wait for my incoming TS12 FDE.
I just purchased mine now!!! Please notify when other accessories are back in stock!
Got the charger and the buttpad. They both look and feel phenomenal! My scorpion has their products all over it as well. Nothing they make has sucked for me yet.
We are glad none of our products have sucked yet! LOL. Great to hear they all work for you and you are satisfied!
Please make an extended and enlarged bolt release button!!!
MANTICORE ARMS has the best products and customer service. If you purchase any of there products you won’t go wrong.
Agree , & I got Sven to straighten out my order really fast.
lovely. ordered both the pad and the knurled thingy.
Bought all 3 of these LOOOOVE IT, thanks !!
I just installed the Charging Handle, it is a welcomed upgrade. While I definitely like Manticore's buttpad better than the factory one, it is 11.5 ounces vs the factory buttpad of 7 ounces. Curious as to why the Manticore buttpad base is steel, while the factory buttpad base is plastic? (both pads are rubber). I would rather have the weight savings of the factory base, since IWI decided the plastic base meets their durability standard. Lastly, my "squish" test suggest the factory rubber is a little softer than the Manticore one (I am unsure as to why the rubber portion of Manticore buttpads are so hard?). I am going to leave the Manticore buttpad on, but I believe weight savings should be taken into account for future versions (Note: I also have a Manticore buttpad on a Tavor X95 SBR I own, and also feel the buttpad is heavier and harder than necessary).
Slightly heavier for x10 the durability, that a amazing trade off/upgrade
Niiiice I also have a Tavor x95
Lift more. I have the buttpad as well. It takes away from the firearm's "fear factor" appeal, but it is very comfortable.
Is there anyway you can make an extender for the magazine tube lever?
Can the original or new charging handle press the button to remove the butt pad?
Timeframe as to when the muzzle brake and charging handle will be back in stock?
These look great! When will these be in stock ?
After shooting my dad's TS12, I had to buy this for him. The original stock and ergonomics are garbage - hopefully this helps!
Why would you not put notches on both sides of charging handle like OEM? Who's going to remember which way to position the notches.
Notches creates a potential point of failiure as a stress riser, it was a design analysis decision for longevity of the part. If you are smart enough to run the Tavor TS12, we are assuming you are smart enough to remember how to install the parts on the gun.
Nice job Sven ! Got the butt pad / muzzle brake & charger handle. Big improvements for each & well worth the $$$ after Buying a Tavor TS 12. Do you have a measured % on recoil reduction on the muzzle brake ? I've seen others say 50 to 60 % reduction in recoil.
50 to 60% ? Theres no way in hell.
What is the length of pull with the buttpad? How does it compare to the original?
The charging handle is MANDATORY upgrade. Factory handle is terrible.
didn't get my gun out to check but my guess is the charge handle would work to get but pad button in to get new but pad off????😉
Other than the buttpad you didn't discuss the benefits of your products over oem.
Thanks u for the muzzle device!!!! For sure buying it
When its back in stock😔
Could you please do a video for the Tavor 7?
We already have one for the Tavor 7, at least for the Hammerhead forend: ruclips.net/video/zFMvaB_B9go/видео.html
Nice video! You just made two more sales. I can live without the "doo-hickey" :)
Good job my nigga 👏 💪 👌 💯 🙌 👍 👏 💪 👌 💯 👏 💪 👌 💯 🙌 👍 👏 💪 👌 💯 👏 💪
The peRRfactor for the zombie apocalypse.
Too bad no button