Building The Swing Arm For Our Dream Mini Bike | MBK-1 Journey Ep.5
HTML-код
- Опубликовано: 4 окт 2024
- VIP Presale 👉🏼 www.mantini.co...
Welcome to the 5th vlog of the MBK-1 journey where we will be sharing the full process from prototype to launch for our new mini bike, the MBK-1.
In this episode we finish building the swing arm for our full suspension mini bike, but we run into another issue when trying to mount the rear wheel. Will this problem cause further delays and will we need to push back the VIP presale?
Find out by watching and be sure to hit subscribe and come along for the ride!
---------------------------------
You can also follow us on:
TikTok 👉🏼 / mantinimotors
Instagram 👉🏼 / mantinimotors
#MantiniMotors, #minibike #MBK-1
Just to clarify, April 6th is when we will be announcing the date of the VIP presale, it is not the presale date 👍 So be sure to register for it here: www.mantini.co/mbk1
You should CNC your business name somewhere on the frame or maybe just M T would look fine. I've been watching this & really enjoying the build so far & you definitely got the right guy helping with this build
Mount the brake caliper on the same sheet metal holding the rear wheel, simplifies the work and less material/complexity, and also won't damage on fall as it's further inside
That was one of the ideas we had but then we wouldn’t be able to mount the axle adjuster which goes at the front there. But we still might try that idea.
If the rest of the bike comes out as nice as the swing arm, you’ve got yourself a winner.
Thanks, I think people are going to be really surprised and happy with the attention to detail we are putting into this bike. Really excited for people to see this in person.
Superior Channel‼️alway knew this channel would blow up . Congrats brotha keep them coming 👊🤘
Thank you! We are just happy to be able to share our passion with the world! So thank you for joining us on this journey.
these episodes keep getting better and better!
I’m glad you are enjoying them! Can’t wait until the bike is done so we can build it and take it for a test ride.
I enjoy these videos so much. Thanks for sharing the whole process!
Glad you are enjoying the videos!! Almost as good as your music!
@@mantinimotors music video collab incoming!
@@DowdenProductionAcademy that would be epic! Maybe for a promo video 😉
That Thang needs to be a trike lol even a side cart would be sick this Thang is hands down best made mini bike ..great job yall God bless mbk fam
Glad you like it! We think it is truly going to turn heads once it is on the streets!
Can't wait to see it on the frame
It’s going to look amazing!
Amazing fixturing! So cool to see this process
Right! I would have never known this is how it would be made but Tom is great and passionate about doing it the right way.
cinematic masterpiece of a video, keep it up!
Thank you! I’m glad you like it.
Going great! 👍
Thanks! It is almost ready!
Tig is where it's at!
100%
Awesome
Thank you!
Big ol baby
April 6th cool thats when my nephew is due 😊
That’s awesome!! Congrats. And just to clarify, April 6th is when we will be announcing the VIP presale date, it is not the date of the sale. 👍
Look at putting the caliper mount on the axle. Any single speed mountain bike that I've ever had with sliding brake calipers was a pain to keep straight. Also, the spacers don't need that tight.
We are looking at all the options for the brake calliper and yes, we might just make the spacers shorter.
That would be really cool if you could put together a kit for people to weld together themselves even if it's by number
Yes, but you would need the fixtures to weld it all together correctly as you saw, it’s quite a complex process.
I think this a great bike and I really think it should come with an option of " PAINTED OR UNPAINTED " for custom paints (DIY) or powder Coating 🤷🏽♂️ just a thought I'm sure we the people or going to be customizing the colors....
Yeah, we have some ideas about that. I’ll be sharing them during the vip presale 👍
I don’t feel the key hole slot is the way to go, on ever 200 series bikes I’ve never had spacers that fit super tight when the rear axle bolt is through, metal flexes I’ve made custom spacers for my rims on builds before, you can get allow spacers to fit loosely but when you tighten the rear axle bolt down it tightens on the spacers, motorcycles don’t have these problems as well, people have solutions for that problem! I definitely don’t think it’s a key hole slot! Personally I would feel a bit sketchy on one
Yeah, these are great point. The main issues is that the back of our swing arm is enclosed. Most motorcycles have plates at the back which make it easier to mount the wheel with the spacers.
We will try the key hole idea but if it doesn’t work we will move on to the next idea until we are confident it will work perfectly.
@@mantinimotors I’ll be watching, I’m excited to see where you go from this point on, I’m planing on building custom fab bikes later in life, I’m 16 right now building all I can with what I have at the moment
How do I find out the status of my order? I have tried to e mail you, but it keeps displaying an error and the e mail was sent back to me. I have paid in full for the kit and the GPS roller kit and am getting a bit concerned that I am unable to have any kind of communication regarding this ... please get back to me.I placed the order the week of June 10th
Hey Jeff, what email are your using? Also, in the confirmation email you would have received when you placed your order would have included a link to our private discord channel where you can reach me directly. But if you prefer email, you can reach me at sam@mantini.co
Could you possibly be able to sell me one
Hey, we might have enough material leftover from the presale. Send an email to Sam here: sam@mantini.co
"promo sm"