I used plastic metal on my mill bed to fill mistake holes. super cleaned the area with acetone after roughing up with a rotary bur. left it for a good week or more and then used a the mill to machine the plastic metal to within a few 10ths then used a stone to get it to the same height as the bed. I do avoid if possible using the area as a contact point but it has been in there for over 5 years now.
Thank you for the input. That definitely sounds like something to consider. The table needs resurfacing a little as isn’t quite flat as you’re expect after all these years. With that in mind I may machine off worst and leave the rest
@@homeworkshopengineering well hurry up and when you are done I will drop my Alexander off at yours for refurbishment !!! Think yours is going to be finished way before mine !!!
What a wonderful machine! Missed out on one of these a few years ago.
Thanks for the comment, yes very flexible and capable machines. Looking forward to getting some work through it soon
I used plastic metal on my mill bed to fill mistake holes. super cleaned the area with acetone after roughing up with a rotary bur. left it for a good week or more and then used a the mill to machine the plastic metal to within a few 10ths then used a stone to get it to the same height as the bed. I do avoid if possible using the area as a contact point but it has been in there for over 5 years now.
Thank you for the input. That definitely sounds like something to consider. The table needs resurfacing a little as isn’t quite flat as you’re expect after all these years. With that in mind I may machine off worst and leave the rest
Don't leave us hanging for part 2 !!
It’s being worked on Dave, keeping plugging away at it
@@homeworkshopengineering well hurry up and when you are done I will drop my Alexander off at yours for refurbishment !!!
Think yours is going to be finished way before mine !!!
@@GrumpiesGarage 😂😂 I’ve had a lot more time on my hands than usual but things may slow down a bit now. Next video is now up.
А где ресторация?????????