I was born ready! Super hyped for this build after what happened with the 240. Your persistence to keep on going is so motivating and inspiring to finish my own goals. Good on you dude, we’re here for the journey! Can’t wait to see you rippin’ this beast.
Yo Kalvin! This build is soo clean. Keeping the wires out of the bay and tucking them where they're hidden makes worlds difference. It's the small things that make a build great. You're doing an awesome job.
I’ve been watching this RUclips channel for a long time, I just never subscribed or anything but I think it’s time I do, why? The amount of work you do in the builds +getting out nice content for us, you can tell when someone has a passion and I definitely do appreciate it. This is one of the few creators actually putting in work rather than making a talking video about future plans over and over... Keep it up!
the fact that you play relatable music in the background and awesome content is the reason why i come back every single day. talking about our homie easy mac... Cant wait for the first start!!
Quick tip: great place to mount relay/fuse box; put several there. BUT a couple precautions: 1) put dielectric grease in every connection. 2) drill small holes in the cover bottom (facing ground) to exit water. 3) cover / block off the hole in the bottom of the headlight bucket. That’s the number one place that lets water in that area, especially when washing the car. As for the washer motor amp, they hate water and typically fry in the wheel well. Lots of water drains in that area. Recommend dielectric greasing that too AND silicone sealing the seam around the bottom of it
Literally I laughed so hard when you hear Taylor ray get back from his first drive and he's flipping shit. I laughed at his video and I laughed at yours. Ha
Mannn i swear everyday this 2jz looks more better personally with my 1j it looks 100x without the valve cover like always awesome vid keep up the good work
My man, even though it's your parent's garage, adding insulation on the garage door would be worth your while because it would reduce your heating costs and make it so you can go longer without having to reheat the garage.
If u can cancel the 90 degree hoses to the intercooler that would be good knowing that your going for some good power because they tend to bust under high boost and at the intercooler is going to be a hard to reach spot after putting on the bumper @ unleash racing
I love this stuff man, the amount of care you’re putting in is awesome. Also just got the sticker I ordered a while back, it looks awesome, I just need to find a place to put it!
Hey Kalvin are you going to publish a guide/ walkthrough about your process that would be really awesome, Also just curious when you swapped out the 2jz and gearbox did you have to upgrade the driveshaft and diff and if so to what?
If you can move that fuse box inside the car do it because if it gets wet you will be lit up like a Christmas tree Nice build dude keep up the hard work cheers
Hey Kalvin I love watching your videos! It’s definitely giving me inspiration for my R33 skyline 👍🏻 my shed is cold as hell in winter and your heater in this video seems like the go! Do you have a link to what it is? Would be much appreciated 🤙🏻 Cheers from AUS 😜
The Z is looking awesome man, I'm loving all the content recently. Just curious on whether or not you shipped out all the poster/sticker orders yet. I bought one of the kouki poster and sticker bundles back in September but still haven't gotten it yet. Keep up the good work man, can't wait to see videos of this thing ripping around.
Thanks a lot man!! Working on getting orders out. I’m sorry it’s taking so long :/ I didn’t forget about you. Yours should be shipping this week 🙌🏼 Thanks for the support bro🙏🏼
yo kalvin i see you are still persistent on challenging fate by not mounting the vice grip, dont get yourself hurt again man you got lucky last time :-)
Kalvin... there is felted heat resistant loom wrap... it comes in a roll of tape and dude... it's awesome and looks slick. The braided stuff tends to fray easily and frays when you cut it. Use tape where you cut if you use it in sure you already knew that. But this loom tape saves all that trouble and looks way way better. Heat resistant felted loom tape is the money. Here is a link for reference. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F172684705502
Sure. But the paint isn’t getting in the way! I rather it be painted that way if I ever need to take it out for whatever reason down the line. I know it will be easy to remove and install without hitting any paint 👌🏼
A guy gets a million+ views each video he puts out only like 1-2 minutes long just flushing shit down the toilet yet kalvin ain't getting the views he deserves sad times :(
So who's ready for that first start 😎🔥
Get some tesa tape for wire harness as well
zehlersan dude you’re so right. That stuff is amazing.
I was born ready! Super hyped for this build after what happened with the 240. Your persistence to keep on going is so motivating and inspiring to finish my own goals. Good on you dude, we’re here for the journey! Can’t wait to see you rippin’ this beast.
@@KalvinMalli yea it's pretty good stuff apparently they have a bunch of different kinds for different applications on their website
@@KalvinMalli did u check out the mil spec firewall quick disconnect connectors? www.milspecwiring.com/Connector-Kits_c_332.html
Yo Kalvin! This build is soo clean. Keeping the wires out of the bay and tucking them where they're hidden makes worlds difference. It's the small things that make a build great. You're doing an awesome job.
Thanks man!
I’ve been watching this RUclips channel for a long time, I just never subscribed or anything but I think it’s time I do, why? The amount of work you do in the builds +getting out nice content for us, you can tell when someone has a passion and I definitely do appreciate it. This is one of the few creators actually putting in work rather than making a talking video about future plans over and over...
Keep it up!
Hey I appreciate the comment man. Means a lot!! Thanks for subscribing. Welcome to the family 😎
I love Jimmy Oaks
9:46 the unmistakeable sound of Taylor going for the first drive in the LS Miata :D
Also can appreciate all the Mac Miller tracks in the background! R.I.P Mac Man.
Calvin has to be the most satisfying RUclips to watch
the fact that you play relatable music in the background and awesome content is the reason why i come back every single day. talking about our homie easy mac... Cant wait for the first start!!
Quick tip: great place to mount relay/fuse box; put several there. BUT a couple precautions: 1) put dielectric grease in every connection. 2) drill small holes in the cover bottom (facing ground) to exit water. 3) cover / block off the hole in the bottom of the headlight bucket. That’s the number one place that lets water in that area, especially when washing the car.
As for the washer motor amp, they hate water and typically fry in the wheel well. Lots of water drains in that area. Recommend dielectric greasing that too AND silicone sealing the seam around the bottom of it
I see boots popping off under boost😂
Great build man. It's nice to see other people still Loving to work on their cars instead of handing it off to a shop. 240sx Ka24Det here.
No no hood exit please keep the quad exhaust
that would be proper
Listen to this guy
Kalvin dropping another 🔥video!
Thanks for watching 😎
Literally I laughed so hard when you hear Taylor ray get back from his first drive and he's flipping shit. I laughed at his video and I laughed at yours. Ha
Dude literally Im so happy to find you and this channel woow man
Good luck for your 100k 😍
🙌🏼🙌🏼🙌🏼
My all respect for you brother 🙏
Hood exit is best idea you’ve had
Let’s get this man to SEMA next year with this car!
Yes the board is getting closer to being cleared
Mannn i swear everyday this 2jz looks more better personally with my 1j it looks 100x without the valve cover like always awesome vid keep up the good work
It’s weird right. I like it without the cover also 😂😬
Don't forget to flare the ends on the intercooler piping so the boots don't blow off.
“I’m iced up this Roley cost me nothing!”
I hear that uzi! This build is killin it bro. Can’t wait to see it finished and rippin!
My guy your vids are a cure to a headache
I bet this car will be done by december due to how kalvin is grinding keep up the good work bro
Great attention to detail can not wait!
this is coming together to nice! Excited to watch!
The engine bay so dam clean shh 🔥🔥
My man, even though it's your parent's garage, adding insulation on the garage door would be worth your while because it would reduce your heating costs and make it so you can go longer without having to reheat the garage.
Great build guy , keep it up !!
proud of you man!
Simply lovely ! Kalvin man I know that feeling man coming along great !!!! You can hear it in your voice keep up the good clean work !!!
This build is coming along so nice!
I see you playing that Mac, good taste in music my man. That 412 in the house
Keep the quad Exhaust for sure!
ohh lord the content is fire kalvin!! damn im jealous😍🔥
If u can cancel the 90 degree hoses to the intercooler that would be good knowing that your going for some good power because they tend to bust under high boost and at the intercooler is going to be a hard to reach spot after putting on the bumper @ unleash racing
I really like this style of content Kalvin!
Lookin real good bro lookin real good 👍
Good work man , keep it up
Thanks for the videos man
I love this stuff man, the amount of care you’re putting in is awesome. Also just got the sticker I ordered a while back, it looks awesome, I just need to find a place to put it!
My dude grindin
Zupra done at 100k=100k burnout till the belts show
Can I ask which heater you got and how well it works?
I know you probably won’t but damn the uppipe from the thumbnail would be so dope... maybe just a screamer pipe out the hood tho?😂
Hey Kalvin are you going to publish a guide/ walkthrough about your process that would be really awesome, Also just curious when you swapped out the 2jz and gearbox did you have to upgrade the driveshaft and diff and if so to what?
If you can move that fuse box inside the car do it because if it gets wet you will be lit up like a Christmas tree
Nice build dude keep up the hard work cheers
Good shit mane
Hey Kalvin I love watching your videos! It’s definitely giving me inspiration for my R33 skyline 👍🏻 my shed is cold as hell in winter and your heater in this video seems like the go! Do you have a link to what it is? Would be much appreciated 🤙🏻
Cheers from AUS 😜
The Z is looking awesome man, I'm loving all the content recently. Just curious on whether or not you shipped out all the poster/sticker orders yet. I bought one of the kouki poster and sticker bundles back in September but still haven't gotten it yet. Keep up the good work man, can't wait to see videos of this thing ripping around.
Thanks a lot man!! Working on getting orders out. I’m sorry it’s taking so long :/ I didn’t forget about you. Yours should be shipping this week 🙌🏼 Thanks for the support bro🙏🏼
Daaamn you Americans are lucky! Wish we could order parts for swaps as easy!
Super Jealous
Clean very clean man 🤙🏽
Intercooler piping XD
yo kalvin i see you are still persistent on challenging fate by not mounting the vice grip, dont get yourself hurt again man you got lucky last time :-)
Bro I just mounted it this morning 😅😂👌🏼
Please powder coat the clamps white too brotha
I'm think of using a haltech 2000 with a terminated harness
you cut off those ends on the intercooler pipes that has the raise bump, wouldn't your clamps slip off under high pressure?
Things hella delicious..
Should try get as many parts of the piping welded as much as possible without the use of so many couplers
we out here, kalv
Kalvin... there is felted heat resistant loom wrap... it comes in a roll of tape and dude... it's awesome and looks slick. The braided stuff tends to fray easily and frays when you cut it. Use tape where you cut if you use it in sure you already knew that. But this loom tape saves all that trouble and looks way way better.
Heat resistant felted loom tape is the money. Here is a link for reference.
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F172684705502
jimmy vs kalvin build off
Black Glokage Jimmy's Z's vs Kalvin'sZ
What ecu are you running cause I'm trying to wire my 2jz 240sx
Not trying to pick at you but wouldn't it have made sense to mock up the intercooler and stuff before paint?
Sure. But the paint isn’t getting in the way! I rather it be painted that way if I ever need to take it out for whatever reason down the line. I know it will be easy to remove and install without hitting any paint 👌🏼
Kalvins Garage gotcha. Just throwing in my 2 senses lol I don't have experience with this kind of stuff yet
You should relocate the fuse box to the glove compartment. Just saying.
Is the Jz easier to work on or the Rb?
I hope you are reaching 100k soon @.@
Where did you get that garage heater from?
Kalvin, I wanna ask, why does a toaster have to do with building a racecar???
What intercooler?!
#fyeahspec
The piping would probably be the hardest thing everything else was most likely a breeze
A breeze? Haha I wish bro. Been a lot of hard work.
@@KalvinMalli lol then I guess you make it look easy bro lol
What intercooler is that
Hood exit I mean shiiiii why not eh
Are you going to wire it up to the key and dashboard to work with the OEM z
Of course. Will work just like a stock z :)
@@KalvinMalli can you make a good how on this part please I what to learn more
#nohoodexit
Rip mac miller
Those pipes will fly right off if you don't make /bead roll the edges.
Oh of course man! Can’t forget those!
Kalvin!!! Where did you get the dress up hardware?!
looks like password jdm but there's alot of china ones with different printings available
Freaking funny how you talk sometimes,
Everything so clean until i saw those crusty wires LOL thank god they wont be seen 🤣
30 year old harness. What can ya do 😂😂
Kalvins Garage true 🤣
Notification gang🔥
GANG
How ur not getting views you deserve is beyond me yet Damian monte puts out shit content and gets views 😌
A guy gets a million+ views each video he puts out only like 1-2 minutes long just flushing shit down the toilet yet kalvin ain't getting the views he deserves sad times :(
Whos damain monte seems like an irrelevant guy
damian is not trash bu Kalvin deserves more views 100%
The Noob Gaming TV 😂😂😂😂
Honda TV he’s thrash bro facts
Noti gang
GANGGANG
first
Comment il lime mdr
Second lol
Get a proper exhaust please, Not another hood exit.
Yo this shit got vtech or whaa
Damn right