Hi!, thanks for your comment, you must use the map to surface component, this allows you to send the voronoi geometry to any surface, even double curvature, I am going to share two videos for reference. ruclips.net/video/3hj4Sm-BNLQ/видео.html ruclips.net/video/43xumTo9oug/видео.html
hi OM, If I wanted to create voronoi cells(not the edges) to bulge on a curved surface how could I do that. I am new to grasshopper and i have been cracking my head for the past 5days. I intend to use the form for my design. I would be glad if you could just hint me. thanks
hello chinedu!!! ☼ thank you for your comment, to do this you must cut the planes where the cell intersect, I think this tutorial could help ruclips.net/video/8vtj0-C0ujc/видео.html if you have any questions, you can write me on facebook: ,facebook.com/Om.EGVO /
great video! i have a question tho. Do i have to define a rectangle to create a voronoi surface? can i define a free surface/hand drawn polygonal shape type surface?
Hi, thanks for your comment. The input Boundary, -Voronoi- component, requests a rectangle to define the boundary, I recommend these videos to change the shape of the boundary and also the curvature of the surface. If you have related questions send me a message on facebook: https: //www.facebook .com / Om.EGVO ruclips.net/video/43xumTo9oug/видео.html ruclips.net/video/3hj4Sm-BNLQ/видео.html
hi，so great work! And I followed you steps, but I find that I haven’t the battery “surface offset solid”, and I can not find it on the food4rhino....so would you mind sending it to me or just tell me where I can download it. Thanks
hi Lijun Wang !!! thank you for your comment you can find the "surface offset solid! component when you install Peacock here is the link___ www.food4rhino.com/app/peacock
hello Nayef Mazraani !! thank you for your comment you can find this component when installing Peacock here I leave the link:www.food4rhino.com/app/peacock
Hi! I have been following your tutorials for a while and they are great! Thank you! I am still new to grasshopper. Even though I could follow you step by step to re-create the same form, I could not comprehend what each step is meant for/why the step is chosen. Is there any source/tutorials you suggest for a beginner like me? Thanks again, and keep up the good work!
hello Archman E!! ☼ thank you very much for following my videos I will prepare some videos to understand the basic concepts of gh I will upload soon, I can recommend any topic in the learning section in grasshopper blog www.grasshopper3d.com/page/tutorials-1
Hola Marcelo !! para instalar peacock INSTALACIÓN 1) Abre la carpeta User Objects Folder desde Grasshopper: File > Special Folders > User Objects Folder, o desde la ruta: C:\Users\\AppData\Roaming\Grasshopper\UserObjects 2) Si tienes una versión anterior de Peacock, elimínala para evitar duplicaciones. 3) Copia la carpeta "Peacock 0.97 UserObjects" y pégala en la carpeta User Objects Folder. 4) Reinicia Rhinoceros y Grasshopper.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
💾.Gh Files 👉 omegvo.gumroad.com/
📧Contact
→Facebook:facebook.com/Om.EGVO/
→Instagram: instagram.com/aaron_mgh/
→holaom.net@gmail.com
#architecture #3dmodel #parametricdesign
Heyyy amazing work! thank you for sharing this with us!
hey hello
greetings from India
you are doing a great job by uploading grasshopper tutorials , please keep it up. :) :)
Hello tejas!!! thanks for support this channel more tutorials and projects soon
Om. And which plugins should I install for grasshopper and rhino for your tutotials ? :)
How do you install the peacock add on? It doesn’t work for me. Please help!
me sirvio mucho para la parte de unos recorridos que tenia que hacer muchas gracias asi son mejores los tuto rapidos y al punto
Hola Carlos Gomez !! ☼ gracias por seguir este canal Saludos !
Om. una pregunta hay alguna forma de que el área que afecta la curva sea menor? Gracias.
para poder hacer esto debes ajustar con estos sliders (1:59) el factor de escala
Listo gracias :D
Hi thanks for video , just want to ask if i didn't want to make the ground in rectangle shape how to exchange it ?
Hi!, thanks for your comment, you must use the map to surface component, this allows you to send the voronoi geometry to any surface, even double curvature, I am going to share two videos for reference.
ruclips.net/video/3hj4Sm-BNLQ/видео.html
ruclips.net/video/43xumTo9oug/видео.html
@@Omegvo thank you 🙏🏻
hi OM, If I wanted to create voronoi cells(not the edges) to bulge on a curved surface how could I do that. I am new to grasshopper and i have been cracking my head for the past 5days. I intend to use the form for my design. I would be glad if you could just hint me. thanks
hello chinedu!!! ☼ thank you for your comment, to do this you must cut the planes where the cell intersect,
I think this tutorial could help ruclips.net/video/8vtj0-C0ujc/видео.html
if you have any questions, you can write me on facebook: ,facebook.com/Om.EGVO /
great video! i have a question tho. Do i have to define a rectangle to create a voronoi surface? can i define a free surface/hand drawn polygonal shape type surface?
Hi, thanks for your comment. The input Boundary, -Voronoi- component, requests a rectangle to define the boundary, I recommend these videos to change the shape of the boundary and also the curvature of the surface. If you have related questions send me a message on facebook: https: //www.facebook .com / Om.EGVO
ruclips.net/video/43xumTo9oug/видео.html
ruclips.net/video/3hj4Sm-BNLQ/видео.html
Thanks for your great work! :))
:) ! ☼
hi，so great work! And I followed you steps, but I find that I haven’t the battery “surface offset solid”, and I can not find it on the food4rhino....so would you mind sending it to me or just tell me where I can download it. Thanks
Wooo,I find it!!😂
hi Lijun Wang !!! thank you for your comment you can find the "surface offset solid! component when you install Peacock here is the link___ www.food4rhino.com/app/peacock
Om. thank you
cant find offset surface solid in rhino 6, any ideas ?
hello Nayef Mazraani !! thank you for your comment you can find this component when installing Peacock here I leave the link:www.food4rhino.com/app/peacock
You did it!!
Hi! I have been following your tutorials for a while and they are great!
Thank you!
I am still new to grasshopper. Even though I could follow you step by step to re-create the same form, I could not comprehend what each step is meant for/why the step is chosen. Is there any source/tutorials you suggest for a beginner like me?
Thanks again, and keep up the good work!
hello Archman E!! ☼ thank you very much for following my videos I will prepare some videos to understand the basic concepts of gh I will upload soon, I can recommend any topic in the learning section in grasshopper blog www.grasshopper3d.com/page/tutorials-1
Om. Much appreciated
Hola OM.. increible sus tutoriales, no puedo instalar este plugin..tengo dudas ..no sé si instalo con las carpetas..o sólo los archivos contenidos
Hola Marcelo !! para instalar peacock
INSTALACIÓN
1) Abre la carpeta User Objects Folder desde Grasshopper: File > Special Folders > User Objects Folder,
o desde la ruta: C:\Users\\AppData\Roaming\Grasshopper\UserObjects
2) Si tienes una versión anterior de Peacock, elimínala para evitar duplicaciones.
3) Copia la carpeta "Peacock 0.97 UserObjects" y pégala en la carpeta User Objects Folder.
4) Reinicia Rhinoceros y Grasshopper.
Muchas gracias OM!!
plugin peacock